Programmable USB Hub will soon launch on Crowdsupply
https://www.electronics-lab.com/programmable-usb-hub-will-soon-launch-crowdsupply/
A USB hub that’s also a dev board and an I2C, GPIO, and SPI bridge. In addition to being a 4-port USB 2 High-Speed hub, this Programmable USB hub is also: A CircuitPython based development board. A bridge between your computer and I2C (via Sparkfun Qwiic connectors), GPIO, and SPI (via its mikroBUS header). A […]
Widget Dashboard for ATtiny85
https://www.electronics-lab.com/widget-dashboard-attiny85/
This project is a dashboard for displaying the outputs from up to four different sensors or Internet of Things devices. It’s based on an ATtiny85 driving an SPI 96×64 SD1331 colour OLED display. by David Johnson-Davies: You can include any widgets from a selection of different types, and they automatically lay themselves out on the […]
Colour Graphics Library for SD1331 OLED display
https://www.electronics-lab.com/colour-graphics-library-sd1331-oled-display/
David Johnson-Davies published a new project. It is a library for SD1331 OLED display module that can even run on ATtiny85 mcu. This is a small color graphics library for an SPI 96×64 colour OLED display based on an SD1331. It allows you to plot points, lines, filled and open rectangles, and text with small […]
High accuracy 3-axis inclinometer with digital true inclination angle output
https://www.electronics-lab.com/high-accuracy-3-axis-inclinometer-digital-true-inclination-angle-output/
Murata has announced a new 3-axis inclination sensor with a tilt angle output and digital SPI interface. The high performance SCL3300 series of devices will be used in a variety of demanding applications including levelling, tilt sensing, machine control and structural health monitoring. Based on Murata’s proven 3D-MEMS sensing technology, the SCL3300-D01 is a 3-axis […]
2.13″ 212 x 104 Three Color E-Ink Paper with SPI
https://www.electronics-lab.com/2-13-212-x-104-three-color-e-ink-paper-spi/
DisplayModule introduced a tiny 2.1″ E-paper display with 212×104 pixels resolution and three colors. The display can be interfaced using SPI and a Raspberry Pi shield is available for the ones that what to connect it to the popular SBC. Main features Three Color E-Ink 2.13 Inch is suited to E-Label. 212×104 resolution E-Ink raw display […]
LoRa-to-Ethernet Gateway
https://www.electronics-lab.com/lora-ethernet-gateway/
A WIZ750SR based device that allows sending and receiving messages over LoRa and LoRaWAN. I got some LoRa modules with SPI communication interface. One of the options it would have been to connect them to my Raspberry Pi. But, I didn’t really like the idea because I already have some stuff connected to my Raspberry […]
FTDI USB-to-serial converters to drive SPI devices
https://www.electronics-lab.com/ftdi-usb-serial-converters-drive-spi-devices/
Scott W Harden writes: The FT232 USB-to-serial converter is one of the most commonly-used methods of adding USB functionality to small projects, but recently I found that these chips are capable of sending more than just serial signals. With some creative programming, individual output pins can be big-banged to emulate a clock, data, and chip […]
SPIDriver – A better SPI Adapter
https://www.electronics-lab.com/zero-hero-spidriver/
This moment in Crowd Supply you can find SPIDriver an intuitive tool for using SPI devices. The campaign that has already collected over $1000 of its $2700 goal, was designed to launch into the market a device to make our lives easier. It can be used with any SPI device such as LCD panels, flash […]
Isolated Power Supply for RS485, RS422, RS232, SPI, I2C and Power LAN
https://www.electronics-lab.com/isolated-power-supply-rs485-rs422-rs232-spi-i2c-power-lan/
Mini Isolated Power Supply is designed for CAN, RS-485, RS-422, RS-232, SPI, I2C, Low-Power LAN applications. The power supply provides +/- 5.50 V DC symmetrical outputs with load current 500mA from 5V DC input. The project is built using SN6505A IC from Texas instruments. The SN6505A is a low-noise, low-EMI push-pull transformer driver, specifically designed […]
The ezPixel is an Upcoming FPGA based WS2812B Controller Board
https://www.electronics-lab.com/ezpixel-upcoming-fpga-based-ws2812b-controller-board/
FPGAs are field programmable gate arrays which basically means they are reconfigurable hardware chips. FPGAs have found applications in different industries and engineering fields from the defence, telecommunications to automotive and several others but little application in the maker’s world. Mostly, as a result of being largely difficult and high cost as compared to the likes […]