Littelfuse Introduces 1 Amp Fault Protected Solid State Relay with Integrated Current Limiting and Thermal Shutdown
Parts

Littelfuse Introduces 1 Amp Fault Protected Solid State Relay with Integrated Current Limiting and Thermal Shutdown

Littelfuse, Inc. a global manufacturer of leading technologies in circuit protection, power control, and sensing, announced the CPC1561B Solid State Relay (SSR). The CPC1561B is the highest current (1 A, 60 V) normally-open SSR currently available on the market to integrate both current...

Continue Reading
1460
Views
0 Comments
Infrared Remote-Controlled AC Load ON/OFF switch with SSR
Control

Infrared Remote-Controlled AC Load ON/OFF switch with SSR

Driving an AC high voltage and current load using an Infrared remote is very easy with this project. This is an open-source Arduino compatible hardware that is based on ATMEGA328 microcontroller, SSR (Solid-state Relay), Infrared Receiver TSOP1838, and analog input interface. We have...

Continue Reading
1208
Views
0 Comments
800 V Normally-Open Solid State Relay – PLA172P Series
Parts

800 V Normally-Open Solid State Relay – PLA172P Series

IXYS' solid state relay with optically coupled MOSFET technology and 105°C temp is able to provide enhanced input to output isolation IXYS Integrated Circuits has a PLA172P series 800 V normally-open solid state relay with 105°C specs and 5000 VRMS input-to-output isolation. It is...

Continue Reading
1273
Views
0 Comments
Littelfuse Adds 105ºC Rated, 800V Solid State Relay to Product Line
Parts

Littelfuse Adds 105ºC Rated, 800V Solid State Relay to Product Line

Littelfuse, Inc. a global manufacturer of leading technologies in circuit protection, power control, and sensing, announced the PLA172P OptoMOS® Relay, an 800 V normally-open single-pole 6-pin solid-state relay (SSR). It is the first solid-state relay in the Littelfuse product...

Continue Reading
1401
Views
0 Comments
App note: Solid-State Relays
Miscellaneous

App note: Solid-State Relays

Solid-state relays introduction from Vishay, (PDF) MOSFET SSRs feature an optocoupler construction, but have a pair of MOSFETs on the output instead of a phototransistor. A pair of source-coupled MOSFETs emulate an electromechanical relay by providing bidirectional switch capability...

Continue Reading
2724
Views
0 Comments
AC Solid state Relay for Inductive Load
Power

AC Solid state Relay for Inductive Load

  AC Solid state Relay for Inductive Load offers simple On/Off type Switch Control with TTL compatible input signal. Input signal : 2 ~ 5 VDC, TTL compatible Output : up to 500 W Mains supply input 230 VAC or 110 VAC Optically isolated Triac based design Power...

Continue Reading
5348
Views
0 Comments
DC Output Solid State Relay
Power

DC Output Solid State Relay

DC Output Solid State Relay 10Amps 60V DC (Optically Isolated Input) This project has been designed around TLP250/352 which is Opto-Coupler IGBT/MOSFET Gate Driver from Toshiba and Mosfet IRFP260 from IR, This relay consists of optically isolated gate driver and low impedance...

Continue Reading
10907
Views
1 Comments
AC Solid State Relay
Control

AC Solid State Relay

This simple circuit designed around Solid State Relay S216S02 from SHARP. The S216S02 solid State Relay (SSR) is an integration of an infrared emitting diode (IRED), a Phototraic Detector and a main output Traic. These devices are ideally suited for controlling high voltage AC loads...

Continue Reading
5377
Views
0 Comments
Archives