Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)
Control

Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)

This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface...

Continue Reading
2.167
Views
0 Comments
Two Channel Smart Low-Side Power Switch for Inductive, Resistive and Capacitive Loads – Arduino Shield
ArduinoTop Stories

Two Channel Smart Low-Side Power Switch for Inductive, Resistive and Capacitive Loads – Arduino Shield

The project presented here enables users to switch all kinds of resistive, inductive and capacitive loads, limited by clamping energy (EAS) and maximum current requirement. The user may interface 2 x inductive, resistive, and capacitive loads such as solenoid, dc motor, high current...

Continue Reading
2.029
Views
1 Comments
Switch debounce circuit uses only one gate
Basic Electronics

Switch debounce circuit uses only one gate

The circuit in Figure 1 produces a single debounced pulse each time you press S1. Moreover, the circuit uses only logic power from the remote pull-up resistor, R2. You can use the circuit to detect when a key is pressed in a non-energized device, such as a device in a system that's...

Continue Reading
2.236
Views
0 Comments
Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch
IC

Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch

Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch is a complementary metal-oxide semiconductor (CMOS) switch in a single channel, 2:1 (SPDT) configuration. The device works with single supply (4.5V to 36V), dual supplies (±4.5V to ±18V), or asymmetric supplies (such as VDD =...

Continue Reading
1.832
Views
0 Comments
Elektor Project: Wi-Fi for LoRa Switch
IoT

Elektor Project: Wi-Fi for LoRa Switch

Clemens Valens @ Elektor Labs writes: We published a remote-controlled switch in the March/April 2020 edition of Elektor magazine. It had state feedback and communicated using LoRa. Because it was housed in a waterproof IP66 enclosure, it was suitable for outdoor use. It was also a...

Continue Reading
2.086
Views
0 Comments
Latest Micro Rotary DIP Switches are IP67 Rated
Parts

Latest Micro Rotary DIP Switches are IP67 Rated

CUI Devices’ Switches Group today announced the addition of micro rotary actuator types to its DIP switches product line. Housed in compact 7.2 x 7.2 x 2.9 mm packages, the RDS-7229 series features 4, 10, or 16 positions, a 5.08 mm pitch, and surface mount or through-hole mounting...

Continue Reading
1.856
Views
0 Comments
ADG5401F SPST Switch has Low ON resistance
IC

ADG5401F SPST Switch has Low ON resistance

Analog Devices' ADG5401F fault protection,10 Ω Ron, SPST switch with 1 kΩ feedback channel ADI's ADG5401F is a single-pole/single-throw (SPST) low on-resistance switch that features overvoltage protection, power-off protection, and overvoltage detection on the source pin. The...

Continue Reading
1.825
Views
0 Comments
THB001P Series Thumbstick Switch features dual axis Mini-joystick
Parts

THB001P Series Thumbstick Switch features dual axis Mini-joystick

C&K's miniature thumbstick switch features a versatile, high-quality dual-axis lever with an integrated center select switch C&K's THB001P miniature thumbstick switch features a versatile, high-quality dual-axis lever with integrated center select switch. It meets the...

Continue Reading
2.240
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives