50V to 5V @7A Synchronous Buck (Step-down) Converter
Power supply

50V to 5V @7A Synchronous Buck (Step-down) Converter

This module is a non-isolated 7A DC-DC converter. The module can convert any DC voltage between 7V to 50V to a 5V DC with load current up to 7A. The project has been designed around LM5116 Wide Range Synchronous Buck Controller IC. The design includes 6uH toroid inductor and two N...

Continue Reading
5.150
Views
0 Comments
36V Operation, Coil-Integrated Step-down DC/DC Converters
Power supply

36V Operation, Coil-Integrated Step-down DC/DC Converters

Torex Semiconductor Ltd. has launched the XDL605/XDL606 series of AEC-Q100 compliant, ultra-small step-down “micro DC/DC” converters which have an integrated coil and control IC. A DC/DC converter power supply circuit can be constructed simply by adding a ceramic capacitor and a...

Continue Reading
2.164
Views
0 Comments
PMP30473 – Lowest noise auxiliary dual output (+5 V and -5 V) power supply reference design
Power supply

PMP30473 – Lowest noise auxiliary dual output (+5 V and -5 V) power supply reference design

This reference design is a 2 x 1-W inverting buck-boost converter. The two output voltages (+5 V and -5 V) are produced from one single buck silicon (TPS57160). Post regulators (and post-filters) ensure ripple-free output voltages. The input voltage range covers automotive and...

Continue Reading
2.748
Views
0 Comments
Single 18650 LiPo Battery to 5V Boost Converter
Power supply

Single 18650 LiPo Battery to 5V Boost Converter

This small board is based on the CS5171 boost converter from ON Semiconductor. The board is configured to be used with a single 18650 LiPo battery. The circuit converts single-cell 3.7V LiPo battery voltage to 5V with a load current up to 400mA. Board has been designed to fit on the...

Continue Reading
3.662
Views
0 Comments
New DC-DC Converter Features 500 mA Output Current
Power

New DC-DC Converter Features 500 mA Output Current

Surface Mount, Non-isolated DC-DC Converter Offers Extreme Efficiency at a Low Cost CUI Inc today announced the addition of its first four contact, surface mount, non-isolated converter to its dc-dc converter line. The ultra-thin VXO78-500-M features a 500mA output current, no-load...

Continue Reading
2.403
Views
0 Comments
L6983 – 38V 3A synchronous step-down converter with 17uA quiescent current
IC

L6983 – 38V 3A synchronous step-down converter with 17uA quiescent current

The L6983 is an easy to use synchronous monolithic step-down regulator capable of delivering up to 3 A DC to the load. The wide input voltage range makes the device suitable for a broad range of applications. The L6983 is based on a peak current mode architecture and is packaged in a...

Continue Reading
2.557
Views
0 Comments
Single IC can produce isolated or non-isolated ±12V outputs
IC

Single IC can produce isolated or non-isolated ±12V outputs

Linear Technology’s 560 VIN micropower no-opto isolated flyback converter with 630 V / 300 mA switch Linear Tech's LT8315 high voltage flyback converter with integrated 630 V / 300 mA switch needs no opto-isolator for regulation. It samples the output voltage from the...

Continue Reading
3.574
Views
0 Comments
LT8228 – 100 V Bidirectional Buck or Boost DC/DC Controllers with Protection
IC

LT8228 – 100 V Bidirectional Buck or Boost DC/DC Controllers with Protection

Analog Devices’ controllers enable full functional safety if one of the batteries fail by forcing the other battery to take over Analog Devices’ LT8228 100 V bidirectional buck or boost DC/DC controllers provide sustainable power in hybrid and electric vehicle (EV) critical...

Continue Reading
3.299
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives