Dual DC Motor Driver For Robot with L298
https://www.electronics-lab.com/dual-dc-motor-driver-robot-l298/
Dual Motor L298 H-Bridge Control project can control two DC motors connected to it. The circuit is designed around popular dual H-Bridge L298 from ST. This board can be configured to drive a single motor with high current rating also. This can be achieved with the help of jumpers on the board. An onboard 5V […]
AC Solid state Relay for Inductive Load
https://www.electronics-lab.com/ac-solid-state-relay-for-inductive-load/
AC Solid state Relay for Inductive Load offers simple On/Off type Switch Control with TTL compatible input signal. Input signal : 2 ~ 5 VDC, TTL compatible Output : up to 500 W Mains supply input 230 VAC or 110 VAC Optically isolated Triac based design Power Battery Terminal (PBT) and Terminal pins for […]
5V & 12V Regulated Power Supply
https://www.electronics-lab.com/5v-12v-regulated-power-supply/
This project can be used to power up TTL and CMOS based projects, it provides 5 VDC & 12 VDC outputs with an onboard mains transformer. The project is based on the industry popular 7800 series voltage regulator in TO220 packages. Features Input: 240 VAC Output: 5 V, 12 V @ 600 mA regulated low […]
Large Current Relay Driver
https://www.electronics-lab.com/large-current-relay-driver/
This is a large current Relay module with single pole double throw switch which provides normally closed and normally open operations. The Relay is the most common used module in application such as home automation, industrial automation, and machine on/off. Sometimes you need to control large current such as the fans, lights, water heaters, room […]
4 Channel Triac Board
https://www.electronics-lab.com/4-channel-triac-board/
Opto-Isolated 4-Channel Triac Board (R) is used for fast switching applications. Ideal for switching mains circuits, lights, appliances and small load. Each circuit is effectively isolated with opto-isolators on each channel, TTL inputs control each channel. Trigger input 2-12 VDC Mains supply input 230 VAC or 110 VAC Output 1 A @ 230 VAC (RMS […]