Meet CH9102F, a Low-Cost Alternative to CP2104 USB-to-UART Bridge
USB

Meet CH9102F, a Low-Cost Alternative to CP2104 USB-to-UART Bridge

As the applications of USB interfaces on computers, MCU boards, devices, and other I/O peripherals increases, there's a parallel increase in demand for cost-effective and high-power USB bus converters for serial and parallel interfaces. CH9102F, a low-cost USB to high-speed serial port...

Continue Reading
3.278
Views
1 Comments
CP2102 USB to UART Breakout Board Features USB Type-C
USB

CP2102 USB to UART Breakout Board Features USB Type-C

Most of the devices now come with a USB Type-C for interfacing and connectivity. Also, the USB to UART conversion is crucial for interfacing if the working device only supports a UART port. CP2102 features a USB Type-C plug for this conversion from USB to UART. We also saw a USB to UART...

Continue Reading
3.930
Views
2 Comments
DipDuino – An Arduino clone made for breadboarding
Arduino

DipDuino – An Arduino clone made for breadboarding

DipDuino is an Arduino clone that’s really small, even simpler to use, and designed for clean use with breadboards. It solves the problem of needing to jump wires from an external board to a breadboard, as well as the need to fit a PCB in a tight spot. Having the entire Arduino on a...

Continue Reading
2.344
Views
0 Comments
Stratify Toolbox – An all-in-one hardware development tool
Interface

Stratify Toolbox – An all-in-one hardware development tool

As a hardware developer, I keep a number of tools and gadgets handy such as a USB to UART converter, O-scope, multi-meter, SWD/JTAG programmer, jumper wires as well as a few others depending on the situation. The Stratify Toolbox will replace all of these and more. Features The...

Continue Reading
2.606
Views
0 Comments
Tiny USB to UART Converter using CH330
USB

Tiny USB to UART Converter using CH330

This is a 10x10mm USB-Uart converter with 2Mbps interface speed based on the cheap CN330. Source files available on GitHub. CH330(N) works with CH340/CH341 driver as pointed out by Icenowy Zheng who made a small USB to TTL debug board based on the chip to practice PCB drawing with...

Continue Reading
6.283
Views
0 Comments
USB to UART Converter with GPIO – MCP220
InterfaceUSB

USB to UART Converter with GPIO – MCP220

The Module is based on The MCP2200, which is a USB-to-UART serial converter which enables USB connectivity in application that have a UART interface. The device reduces external components by integrating the USB termination resistors. The MCP2200 also has 256-bytes of integrated user...

Continue Reading
6.582
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives