login
This is the image preview of the following page:
USB for Intel's MX10 and SpiderSoM Modules
MX10 and SpiderSoM modules are outfitted with a USB device interface, applied with PIC16F1454 microcontroller (MCU). On the SoM side the MCU is connected to three interfaces: serial (if the other side is applied inside the FPGA), an I2C bus (connected to the module PMIC, charge controller, RTC and... Read More
Image Downloads:
- full (800x565)
- thumbnail (150x150)
- medium (300x212)
- medium_large (640x452)
- large (640x452)
- 1536x1536 (800x565)
- 2048x2048 (800x565)
- re_large (783x565)
- re_xxmedium (290x230)
- re_xmedium (359x236)
- re_medium (420x320)
- re_a_xsmall (186x174)
- re_xsmall (125x96)
- crp_thumbnail (292x236)
- menu-24x24 (24x17)
- menu-36x36 (36x25)
- menu-48x48 (48x34)
- sendpress-max (600x424)
- woocommerce_thumbnail (300x225)
- woocommerce_single (600x424)
- woocommerce_gallery_thumbnail (100x100)
- wp_rp_thumbnail (150x150)
- wp_rp_thumbnail_prop (150x106)
RELATED POSTS
27 November, 2020 USB-C, DFP, 5V/3A Out, 85-265VAC In, Adapter, Low Cost Reference Design
20 June, 2016 Intro to Printed Circuit Boards
26 February, 2019 “Swordtail” i.MX6 SBC offers NimbleLink cellular expansion
7 January, 2020 FPGA platform is twice as fast at half the power
16 November, 2020 Advantech Launches Embedded Platforms with Intel Atom® x6000 Series and Intel® Pentium® and Celeron® N and J Series Processors
2 May, 2019 Digi-Key announces supplier-driven KiCad Library
