TA9410E RF GaN Transistor is ideal for radio applications
https://www.electronics-lab.com/ta9410e-rf-gan-transistor-is-ideal-for-radio-applications/
Tagore’s transistor is ideal for radio applications such as public safety radios and EW radios. Tagore’s TA9410E is a broadband 50 V, 25 W GaN transistor capable of operating from 20 M to 3 GHz. Using a simple input/output match, it can be tuned for various bands of interest. This transistor can be considered as a final stage PA […]
FSP330 Ultra-Slim 24 V Fanless Adapter
https://www.electronics-lab.com/fsp330-ultra-slim-24-v-fanless-adapter/
SP’s FSP330 is a slim 330 W high wattage fanless external power supply The FSP330 is a 330 W AC-to-DC adapter from FSP intended for use in IPC systems, embedded systems, printers, monitors, charging systems, and POS systems that have high wattage demands. This adapter operates at 90 VAC to 264 VAC input voltage and meets CISPR32 EN55032 […]
Würth Elektronik MEMS Sensor Portfolio
https://www.electronics-lab.com/wurth-elektronik-mems-sensor-portfolio/
The Würth Elektronik sensors are an integral part of every future application. Measuring temperature, humidity, pressure or acceleration has never been easier. Take advantage of services like the Software Development Kit and Evaluation Boards available off-the-shelf. Detailed documentation, as well as direct support by trained engineers, will leave no questions open. With excellent measuring accuracy […]
Broadcom AEAT-9922 10-Bit to 18-Bit programmable magnetic encoder
https://www.electronics-lab.com/broadcom-aeat-9922-10-bit-to-18-bit-programmable-magnetic-encoder/
The AEAT-9922 is an angular magnetic rotary sensor that provides accurate angular measurement over a full 360° of rotation The AEAT-9922 is an angular magnetic rotary sensor that provides accurate angular measurement over a full 360° of rotation. It is a sophisticated system that uses integrated Hall sensor elements with complex analog and digital signal […]
Sensorless FOC 3 Phase Low Power Brushless BLDC Motor Driver
https://www.electronics-lab.com/sensorless-foc-3-phase-low-power-brushless-bldc-motor-driver/
Driving a 3-phase brushless DC motor is very easy with this project. It is a simple and easy-to-build project that requires only a few external components. The circuit is based on AMT49400 IC which is an advanced 3-phase, Sensorless, brushless DC (BLDC) motor driver with integrated power MOSFETs. The chip includes the field-oriented control (FOC) […]
Low Voltage Lead Acid Battery Disconnect board – Prevents Deep Discharge Of 12V Lead Acid Battery
https://www.electronics-lab.com/low-voltage-lead-acid-battery-disconnect-board-prevents-deep-discharge-of-12v-lead-acid-battery/
This project helps to optimize the 12V lead-acid (SLA) battery life as it prevents the battery from going into deep discharge. It is very important to disconnect the load before the battery enters into deep discharge as this may destroy or damage the battery cells. The circuit shown here turns off the load before the […]
High Side Switch with Input Overvoltage and Overcurrent Protection
https://www.electronics-lab.com/high-side-switch-with-input-overvoltage-and-overcurrent-protection/
The project here is a 48V protected, high side switch designed to switch a 5A output load from input voltages from 8V to 48V. The circuit helps the user to easily ON/OFF the high current and voltage load with over-voltage lockout and over-current protection. The wide input range and low shutdown current (1μA typical) make […]
3W Stereo Differential Input CLASS-D Audio Amplifier with UP/DOWN Volume
https://www.electronics-lab.com/3w-stereo-differential-input-class-d-audio-amplifier-with-up-down-volume/
The circuit presented here is a 3W stereo audio amplifier with memory UP/DOWN volume control. The project is based on PAM8408 IC from Diode Incorp which is a filter-less class-D amplifier with high SNR and Differential input which helps eliminate noise. Two tactile switches are provided to control the UP/DOWN volume in 32-steps and it […]
Galvanic Isolated 8 Channel High-Side Switch (0.6A per channel)
https://www.electronics-lab.com/galvanic-isolated-8-channel-high-side-switch-0-6a-per-channel/
This project provides 8 fully protected and isolated high-side power switches that are able to handle current up to 625 mA. An 8-bit parallel microcontroller compatible interface allows connecting the inputs directly to a microcontroller or standalone circuit system. The input interface also supports direct control mode and is designed to operate with 3.3/5V CMOS […]
Bring your creations to life with LumiCube — an ultimate LED cube kit for the Raspberry Pi
https://www.electronics-lab.com/bring-your-creations-to-life-with-lumicube-an-ultimate-led-cube-kit-for-the-raspberry-pi/
A two-man team has created an ultimate LED cube kit for the Raspberry Pi, one that helps to bring your ideas and creativity to life. “We created the LumiCube to bring the joy of tinkering with technology to as wide an audience as possible. Perhaps you remember the fun and excitement of sitting in front […]