Rutronik RAB7: AI-Powered Sensor Fusion Arduino Shield with Bosch, Infineon, and Sensirion Sensors
https://www.electronics-lab.com/rutronik-rab7-ai-powered-sensor-fusion-arduino-shield-with-bosch-infineon-and-sensirion-sensors/
With a total of seven environmental and inertial sensors facilitated by Bosch, Infineon, and Sensirion, the fully open-source hardware Arduino shield known as the Rutronik Adapter Board RAB7 is intended for AI-powered Sensor Fusion application. The RAB7 Adapter Board can be readily integrated with other Rutronik System Solutions base boards and adapter boards thanks to […]
Waveshare RA4M1-Zero Mini Development Board Offers 48MHz ARM MCU with Arduino Support, Secure Boot, FPU, and CAN Bus
https://www.electronics-lab.com/waveshare-ra4m1-zero-mini-development-board-offers-48mhz-arm-mcu-with-arduino-support-secure-boot-fpu-and-can-bus/
Waveshare has introduced the RA4M1-Zero, a compact, cost-effective Mini Development Board built around the 32-bit Renesas RA4M1 MCU, based on the ARM Cortex-M4 architecture with a 48MHz operating frequency and a built-in Floating Point Unit (FPU). This was designed in the standard Zero-size form factor (18 x 23.5 mm) created by Waveshare, which is made […]
FlippenHeimer Turns Flipper Zero into an Ultra-Compact Geiger Counter Module
https://www.electronics-lab.com/flippenheimer-turns-flipper-zero-into-an-ultra-compact-geiger-counter-module/
Designed to be integrated with the multi-purpose electronic tool Flipper Zero, the FlippenHeimer functions as a miniature Geiger counter add-on module. Using the Flipper’s display and power supply, users can keep an eye on the levels of beta and gamma radiation, making it a portable radiation detector. The FlippenHeimer, which draws its foundation on a […]
LILYGO T-LoRa Pager: ESP32-S3 IoT Board with LoRa, GNSS, NFC, and IMU Support
https://www.electronics-lab.com/lilygo-t-lora-pager-esp32-s3-iot-board-with-lora-gnss-nfc-and-imu-support/
The T-LoRa Pager from LILYGO is a compact IoT development board designed for applications such as asset tracking, remote sensing, and portable communication. It is powered by the ESP32-S3 microcontroller and comes with 16MB flash and 8MB PSRAM. Key hardware features include an RTC circuit, GPIO expansion headers, a battery management system, an audio codec, […]
Boardcon Idea3576 SBC Features Rockchip RK3576 SoC with 6 TOPS NPU, Dual Ethernet, and 4K Multimedia Support
https://www.electronics-lab.com/boardcon-idea3576-sbc-features-rockchip-rk3576-soc-with-6-tops-npu-dual-ethernet-and-4k-multimedia-support/
The Boardcon Idea3576 is a single-board computer (SBC) built around the Rockchip RK3576 processor, featuring a hybrid octa-core CPU (4x Cortex-A72 @ 2.2GHz + 4x Cortex-A53 @ 1.8GHz) and a 6 TOPS NPU for AI workloads. It includes an ARM Mali-G52 GPU for graphics rendering and supports machine learning, edge AI, computer vision, and industrial […]
Morse Micro and Gateworks Corporation Introduces Wi-Fi HaLow M.2 Module for Industrial Applications and VeniceFLEX SBC
https://www.electronics-lab.com/morse-micro-and-gateworks-corporation-introduces-wi-fi-halow-m-2-module-for-industrial-applications-and-veniceflex-sbc/
Morse Micro has teamed up with Gateworks Corporation to deliver the GW16159, a rugged, industrial-grade 802.11ah Wi-Fi HaLow M.2 radio module for long-range, low-power wireless communication in IoT applications. Specifically built for use with Gateworks VeniceFLEX single board computers, it connects via an M.2 E-Key 2242 interface using SDIO signalling—not compatible with standard Venice SBCs. The […]
AAEON’s NanoCOM-MTU Hosts 28W Intel Core Ultra CPUs on the COM Express Type 10 Form Factor
https://www.electronics-lab.com/aaeons-nanocom-mtu-hosts-28w-intel-core-ultra-cpus-on-the-com-express-type-10-form-factor/
The world’s first COM Express Type 10 module to host 28W CPUs from the Intel® Core™ Ultra line, the NanoCOM-MTU represents makes a big statement in a small form factor. AAEON, a leading provider of Computer-on-Modules, has today announced the NanoCOM-MTU, a COM Express Type 10 CPU Module powered by Intel® Core™ Ultra processors. Available […]
Axiomtek Launches KIWI330: Ultra-Compact 1.6″ SBC with LPDDR5, NVMe, and Type-C DisplayPort for Edge AIoT
https://www.electronics-lab.com/axiomtek-launches-kiwi330-ultra-compact-1-6-sbc-with-lpddr5-nvme-and-type-c-displayport-for-edge-aiot/
Axiomtek – a world-renowned leader relentlessly devoted to the research, development, and manufacture of innovative, highly efficient, and reliable industrial computer products – is pleased to introduce the KIWI330, an ultra-compact 1.6” embedded board built to accelerate AIoT development and streamline device integration. Powered by the Intel® processor N50, the KIWI330 is equipped with 4GB of onboard […]
Radxa eMMC/UFS Module Reader Lets You Flash Storage via USB 3.0 Adapter
https://www.electronics-lab.com/radxa-emmc-ufs-module-reader-lets-you-flash-storage-via-usb-3-0-adapter/
The eMMC/UFS Module Reader from Radxa is a compact and versatile USB 3.0 adapter designed to read and write data from eMMC and UFS storage modules, specifically tailored for development boards like the Radxa ROCK series. It enables easy flashing, backup, or data recovery by connecting the storage module to a standard PC via USB. […]
GL.iNet GL-BE9300 tri-band WiFi 7 router ships with 5x 2.5GbE ports, OpenWrt, and VPN support
https://www.electronics-lab.com/gl-inet-gl-be9300-tri-band-wifi-7-router-ships-with-5x-2-5gbe-ports-openwrt-and-vpn-support/
GL.iNet Flint 3 (GL-BE9300) is a budget-friendly tri-band WiFi 7 BE9300 router designed for advanced home and small office networking, offering fast wireless performance and multiple high-speed wired connections. The most interesting thing is that it integrates features typically found in premium routers, like support for VPNs, load balancing, and failover. Powered by a 1.5 […]