Join the Community
Main Menu
M5Stack PaperDIY Is a 4.7-Inch ESP32-S3 E-Paper Development Board
Helix 521-PLC Fanless Edge Controller Runs CODESYS on Intel Core Ultra
Infineon Adds Post-Quantum Security to Quad-Motor Control MCUs
HPMicro HPM5100 MCU Series Brings 480 MHz RISC-V and 16-bit ADCs
Polyimide Tape for PCB Masking: Avoiding Edge Lift and Residue
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
Single Pair Ethernet: One Twisted Pair, Full Ethernet Performance
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
ESP8266 is a very powerful module for building an IoT or WiFi-based project.
Raspberry Pi has been the household name for many years now, and many other companies have tried to replace it with their...
The projects shown here is a 2 Digit 00-99 Seconds or 00-99 Minutes Countdown kitchen timer based on PIC16F1825 micro-controller.
Clemens Valens @ elektormagazine.com discuss about a new IC substrate.
The A1230 is a dual-channel, bipolar switch with two Hall-effect sensing elements, each providing a separate digital output for...
SiFive, the first fabless provider of customized, open-source-enabled semiconductors, had recently announced the availability of...
A detailed die photos and reverse engineering of the 74181 ALU chip by Ken Shirriff: What’s inside a TTL chip?
The Step-Up DC-DC Converter project provides 28V, 175mA output with input of 12V DC.
If you want to take a timelapse with your camera, it may be helpful to use an intervalometer.
4 Channel Opto isolated board has been designed around 6N137 Opto-coupler, the 6N137 optocoupler is designed for use in...
ESP8266 has made it possible for makers to develop IoT applications in much simpler and more inexpensive ways.
Arduino boards are very useful for beginners to get started with building hardware projects.
