Join the Community
Main Menu
M5Stack PaperDIY Is a 4.7-Inch ESP32-S3 E-Paper Development Board
Helix 521-PLC Fanless Edge Controller Runs CODESYS on Intel Core Ultra
Infineon Adds Post-Quantum Security to Quad-Motor Control MCUs
HPMicro HPM5100 MCU Series Brings 480 MHz RISC-V and 16-bit ADCs
Polyimide Tape for PCB Masking: Avoiding Edge Lift and Residue
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
Single Pair Ethernet: One Twisted Pair, Full Ethernet Performance
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
Optically isolated parallel port break out board designed for Hobby CNC, Routers and Motion controller, This Board is an easy...
Bipolar stepper drive board described here has been designed around TB6600HG IC.
Clemens Valens @ elektormagazine.com discuss about the new CEC1302 microcontroller from Microchip.
“Kai” is in the process of building a Geiger counter based on BPW34 photodiode and explains his first step for the sensor circuit.
A new die shoot from zeptobars.com.
Keith Szolusha@ edn.com writes: In certain dc/dc-converter applications, on-chip, cycle-by-cycle current limit may be...
This project is a wifi synchronised desktop clock using 7-segment displays.
The Tiny Step-Down DC-DC converter project provides 5V 500mA output from supply input up to 25V DC.
GreatScottLab @ instructables.com build a step up dc-dc converter with the help of ATtiny85 microcontroller.
Linear Technology Corporation announces the LT8608, a 1.5A, 42V input synchronous step-down switching regulator.
The Step-Up DC-DC Converter project provides 28V, 175mA output with input of 12V DC.
Ken Shirriff reverse engineer the CMOS version of 555 timer IC and explains how it works.
