Join the Community
Main Menu
HPMicro HPM5100 MCU Series Brings 480 MHz RISC-V and 16-bit ADCs
What Is DECT NR+? Examining the New 5G Non-Cellular Mesh Standard
Microchip MTCH3380P and MTCH3240P Touch Controllers Offer Parallel Sensing
Firehat Is an Open-Source FireWire DV Capture HAT for SBCs with PCIe FFC
Polyimide Tape for PCB Masking: Avoiding Edge Lift and Residue
Prevent Post-Launch Application Failures with Real-World Network Simulation
The Approach to AI Infrastructure Is the Real Bubble
Mastering the Curve: Layout Strategies for FPC Bend Radius and Reliability
Single Pair Ethernet: One Twisted Pair, Full Ethernet Performance
Analog To Digital Conversion - Sampling and Quantization
Positive Feedback in Electronic Circuits
Temperature Sensors
High Current Half Bridge with Over-Current Shutdown
3-Wire Electret Microphone Pre-Amplifier
12W Step Up DC-DC Converter using MAX1771
Sound to Light Color Shield for OLEDUINO v2
An Introduction to RF Theory, Practices, and Components: The Ins and Outs of RF
The Growing Decentralization of Power Grids
STMicroelectronics’ single-chip half-bridge gate driver is designed for enhancement mode GaN FETs or N-channel power MOSFETs S...
The NCP5156x are isolated dual-channel gate driver with up to 4-A/8-A source and sink peak current.
Microchip Technology has released 24CS512, the first commercially available I2C Serial EEPROM with support for 3.4 Mbit/s data...
The project described here is a pre-driver for brushless motors with a hall sensor.
Analog Devices Inc.
ARM has developed the first full 32bit microcontroller built on a flexible plastic material using a 0.8 μm process from PragmatIC.
This is an easy to build and very useful project for hobbyists and students to learn and create op-amp-based projects.
iWave Systems is pleased to inform about the VxWorks BSP release for its XILINX UltraScale+ MPSoC System on Modules.
We have come across multiple hardware development boards and MCUs that employ Edge AI for processing and computing.
SparkFun QuickLogic Thing Plus was originally crowdfunded on CrowdSupply that raised around $4500.
Espressif’s ESP32-C3-DevKitM-1 is extremely popular due to its many onboard features.
We have seen many system on modules in the market already targeting consumer electronics and smart homes.
