ZOTAC ZBOX PRO CM5-PICO Packs Dual 4K HDMI into a Fanless Industrial PC
https://www.electronics-lab.com/news/zotac-zbox-pro-cm5-pico-packs-dual-4k-hdmi-into-a-fanless-industrial-pc/
Powered by Raspberry Pi CM5, this compact industrial PC offers up to 16GB RAM, M.2 expansion, and versatile I/O.
Firehat Is an Open-Source FireWire DV Capture HAT for SBCs with PCIe FFC
https://www.electronics-lab.com/news/firehat-is-an-open-source-firewire-dv-capture-hat-for-sbcs-with-pcie-ffc/
The open-source Firehat HAT brings a VIA VT6315N FireWire controller, DV/HDV capture, and onboard controls to PCIe-enabled single-board computers.
CHC5 is an Open Modular Camera System with Interchangeable Sensors and Lens Mounts
https://www.electronics-lab.com/news/chc5-is-an-open-modular-camera-system-with-interchangeable-sensors-and-lens-mounts/
CircuitValley’s CHC5 is a modular machine-vision camera with interchangeable sensors and lens mounts, FPGA-based ISP processing, USB 3.0, GigE Vision, and HDMI outputs.
ARK Just A Pi Shrinks Raspberry Pi CM5 Connectivity to 55 × 40 mm
https://www.electronics-lab.com/news/ark-just-a-pi-shrinks-raspberry-pi-cm5-connectivity-to-55-x-40-mm/
This NDAA-compliant CM5 carrier board packs dual Ethernet, PCIe, USB 3.0, dual camera interfaces, HDMI, and GPIO into a compact embedded platform.
iLabs Challenger+ RP2350 NB-IoT Development Board Combines LTE Cat NB2 and GNSS
https://www.electronics-lab.com/news/ilabs-challenger-rp2350-nb-iot-development-board-combines-lte-cat-nb2-and-gnss/
The Challenger+ RP2350 pairs Raspberry Pi’s RP2350 with ST’s ST87M01-1301 for low-power NB-IoT, GNSS, and battery-powered IoT applications.
Clintech Pico Board exposes all 48 RP2354B GPIOs in Pico-compatible design
https://www.electronics-lab.com/news/clintech-pico-board-exposes-all-48-rp2354b-gpios-in-pico-compatible-design/
Built around the RP2354B, this compact development board adds USB Type-C, QSPI expansion, and full 48-GPIO access while maintaining Raspberry Pi Pico compatibility.
Forgix Packs RP2354 MCU and Trion T8 FPGA into a $50 Teensy-Size Board
https://www.electronics-lab.com/news/forgix-packs-rp2354-mcu-and-trion-t8-fpga-into-a-50-teensy-size-board/
Adiuvo Engineering's Forgix combines a Raspberry Pi RP2354, Efinix Trion T8 FPGA, 2MB flash, PSRAM, and USB-C in a compact development board for $50.
Brechel Raspberry Pi SPE HAT Adds 10BASE-T1S and 10BASE-T1L Networking
https://www.electronics-lab.com/news/brechel-raspberry-pi-spe-hat-adds-10base-t1s-and-10base-t1l-networking/
BE-IIS-HPP-T1S and T1L HATs bring IEEE 802.3cg Single Pair Ethernet, HAT++ stacking, isolated interfaces, and 10 Mbps networking to Raspberry Pi SBCs.
RP2350B BellsNWhistles Board Adds Onboard Debugger and HDMI
https://www.electronics-lab.com/news/rp2350b-bellsnwhistles-board-adds-onboard-debugger-and-hdmi/
Designed for rapid prototyping, this open-source platform features dual USB-C ports, MicroSD storage, optional PSRAM, and a built-in RP2040 to eliminate external probes.
Romu is a Tiny RP2354A USB Development Board for Embedded Projects
https://www.electronics-lab.com/news/romu-is-a-tiny-rp2354a-usb-development-board-for-embedded-projects/
A keychain-sized USB Type-A board built around the RP2354A MCU with MicroPython support, RGB LED, capacitive touch input, and debugging features.