50V – 5A DC Brush Motor Driver – High Performance, High Reliability
https://www.electronics-lab.com/project/50v-5a-dc-brush-motor-driver-high-performance-high-reliability/
This is a powerful yet small-size and low-profile brushed DC motor drive system, with key features like adjustable constant current control, direction control, brake controls, Alert output, PWM for speed control, etc. The BD63150AFM chip is the heart of the project which is one H-bridge motor driver for DC brush motors. This board enables low […]
Variable Over-Current Detection Load Switch
https://www.electronics-lab.com/project/variable-over-current-detection-load-switch/
This over-current latch load switch provides over-current protection, thermal shutdown protection, soft-start function, and low power OFF function. The Overcurrent protection function is activated when the load is shorted. This protection function is effective in preventing damage due to sudden and unexpected incidents. It is also equipped with an error flag notification pin which indicates […]
55V – 3A Half-Bridge Power Driver Module
https://www.electronics-lab.com/project/55v-3a-half-bridge-power-driver-module/
This Half-bridge module provides current measurement and regulation features for various loads. The module can be used to drive solenoids, Relays, Valves, DC-DC converters, Brushed DC motors, or other loads. It can operate from a 5V to 55V supply voltage and can deliver up to 3A of output current (depending on ambient temperature). Cycle-by-cycle current […]
Texas Instruments bq25176M 800mA Linear Battery Charger
https://www.electronics-lab.com/texas-instruments-bq25176m-800ma-linear-battery-charger/
Texas Instruments bq25176M 800mA Linear Battery Charger is an integrated linear solar charger for 1-cell Li-Ion, LiFePO4, and Li-Polymer batteries with continual charge mode and battery tracking VINDPM. The device has a single power output that charges the battery. When the system load is placed in parallel with the battery, the charge current is shared […]
The EPIC-ADS7-PUC Offers Real-Time Computing in a Compact Chassis for Robotics, Automation, and Healthcare Imaging Solutions
https://www.electronics-lab.com/the-epic-ads7-puc-offers-real-time-computing-in-a-compact-chassis-for-robotics-automation-and-healthcare-imaging-solutions/
AAEON’s new EPIC-ADS7-PUC is the ultimate high-speed, high-powered solution compact system. Typically associated with powerful, feature-dense 4” single-board computers, AAEON has announced the reintroduction of system-level solutions to its EPIC product line with the new EPIC-ADS7-PUC. Powered by the 12th Generation Intel® Core™ processor platform with the capacity to support up to 65W CPUs, the […]
Step Up DC-DC Converter 12V Output – 5V Input
https://www.electronics-lab.com/project/step-up-dc-dc-converter-12v-output-5v-input/
This high-performance, fixed frequency, current-mode PWM step-up DC/DC converter efficiently produces 12V from input voltages between 3.6V to 5.5V. The project is built using the PAM2423 chip, which includes an integrated power MOSFET that supports a peak current of up to 5.5A. The IC utilizes simple external loop compensation allowing optimization between component size, cost, […]
PWM to Voltage Converter – PWM to Voltage Output DAC
https://www.electronics-lab.com/project/pwm-to-voltage-converter-pwm-to-voltage-output-dac/
The project presented here is a dual 12-bit PWM-to-voltage output DAC with high accuracy. The board is based on the LTC2644 chip. The LTC2644 measures the period and pulse width of the PWM input signals and updates the voltage output DACs after each corresponding PWM input rising edge. The DAC outputs update and settle to […]
Dual 2A Power Amplifier Module for TEC
https://www.electronics-lab.com/project/dual-2a-power-amplifier-module-for-tec/
This Dual 2A Power Amplifier module is a low-cost operational amplifier designed for driving a wide variety of loads while operating on low-voltage supplies. The dual amplifier can drive high output loads with a current of up to 2A. This Dual 2A Power Amplifier has been designed as a TEC (thermoelectric cooler) driver but it […]
Electronic DC Load using TLE2141
https://www.electronics-lab.com/project/electronic-dc-load-using-tle2141/
The circuit shown here is a low-cost electronic DC load designed to sink current from a power source. This test equipment can be used to test power devices such as power supplies, chargers, solar panels, and batteries. The board is built using op-amp TLE2141, LM385 provides the reference voltage. Resistor R11 acts as a shunt […]
LattePanda Team Launches LattePanda Sigma – a Hackable Single Board Server with Mighty Power
https://www.electronics-lab.com/lattepanda-team-launches-lattepanda-sigma-a-hackable-single-board-sever-with-mighty-power/
LattePanda launched the powerful and hackable single board server, the LattePanda Sigma. With its supercomputing power, this device opens up endless possibilities for tech enthusiasts, small businesses & enterprises. With its innovative design and unique features, the LattePanda Sigma is poised to redefine the world of single board servers and drive innovation to new heights. […]