Triple-band antenna is available at Mouser
https://www.electronics-lab.com/triple-band-antenna-is-available-at-mouser/
Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna is a miniature BLUETOOTH®/Wi-Fi® 6E and UWB internal chip antenna that operates in the 2400MHz to 2500MHz, 4900MHz to 5850MHz, and 5850MHz to 7200MHz bands. With IEEE 802.11 ax compliance, the surface mount 2450AD18A6050 Antenna offers a single feed point […]
Schurter Capacitive Hidden Switch (CHS) Metal Line Switches
https://www.electronics-lab.com/schurter-capacitive-hidden-switch-chs-metal-line-switches/
Schurter Capacitive Hidden Switch (CHS) Metal Line Switches are intended for use behind non-conductive surfaces, enabling interface designers more flexibility in custom panel designs. These capacitive switches can be used as a single key or in arrays. The standard switches can be mounted behind a glass surface up to 2mm in thickness. The sensitivity level […]
Diodes Incorporated AP3128 PWM Controller
https://www.electronics-lab.com/diodes-incorporated-ap3128-pwm-controller/
Diodes Incorporated AP3128 PWM Controller is a peak-current control and multi-mode (QR+CCM) PWM controller. This controller is optimized for high performance, low standby power, and cost-effective offline flyback converters. The AP3128 is designed to enter burst mode at no-load/light-load and minimizes standby power consumption. This controller features a 105kHz maximum switching frequency that clamps the QR […]
MAX17330X22+ Standalone 1-Cell Charger, Fuel Gauge, and Protector
https://www.electronics-lab.com/max17330x22-standalone-1-cell-charger-fuel-gauge-and-protector/
Maxim’s highly integrated charger, fuel gauge, protector, and battery internal self-discharge detection IC for 1-cell lithium-ion/polymer batteries Maxim’s MAX17330 regulates charge voltage, current, and FET temperature with stand-alone charging supported by flexible configuration in nonvolatile memory. The IC supports the following applications: low-power charging including 1 mA to 500 mA directly from universal 5 V USB, high-power parallel […]
MP6650 Single-Phase BLDC Motor Driver features multiple protections
https://www.electronics-lab.com/mp6650-single-phase-bldc-motor-driver-features-multiple-protections/
MPS’ 18 V 2 A motor driver features include input OVP, UVLO, RD protection, thermal shutdown, and input reverse protection MPS’ MP6650 single-phase brushless DC motor driver has integrated power MOSFETs and a Hall effect sensor. The device drives single-phase brushless DC fan motors with up to 2 A of output current. The IC has […]
MP6550 H-Bridge Motor Driver consists of four N-channel power MOSFETs
https://www.electronics-lab.com/mp6550-h-bridge-motor-driver-consists-of-four-n-channel-power-mosfets/
MPS’ H-bridge motor driver consists of four N-channel power MOSFETs and an internal charge pump to generate gate-drive voltages The MP6550 from Monolithic Power Systems is an H-bridge motor driver consisting of four N-channel power MOSFETs and an internal charge pump to generate gate-drive voltages. The MP6550 is typically used to drive a DC brush motor. […]
SerialUPDI Programmer – Simple UPDI programmer for tinyAVR
https://www.electronics-lab.com/serialupdi-programmer-simple-updi-programmer-for-tinyavr/
Simple UPDI programmer for tinyAVR, megaAVR and AVR-Dx microcontrollers with voltage selection switch (5V and 3.3V). The programmer works with pyupdi as well as with the Arduino IDE as “SerialUPDI with 4.7k resistor or diode”. It is based on the USB-to-serial chip CH340N. SerialUPDI Programmer – Simple UPDI programmer for tinyAVR – [Link]
X-sense Smart Home Security Kit – Quick Review
https://www.electronics-lab.com/x-sense-smart-home-security-kit-quick-review/
Introduction There are many reasons to invest in a home security system especially in today’s day and age – from providing total security of valuables to having the security of persons, and eventually to have that peace of mind that comes with knowing that everything is under your control whether you are home or not. […]
Logic NAND Function
https://www.electronics-lab.com/article/logic-nand-function/
Logic NAND Function The logic NAND function gives the inverted output of the logic AND function. It complements the output of the logic AND function to give the NOT AND (NAND) function. The logic NAND function is the combination of two logic functions that are AND & NOT logics. These AND & NOT logics form […]
2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible
https://www.electronics-lab.com/project/2-5a-bipolar-stepper-driver-with-micro-stepping-current-and-decay-control-arduino-compatible/
This is an Arduino compatible board that contains an Atmega328 microcontroller and Bipolar Stepper Motor Driver chip STK682-010. This Hybrid IC from ON Semiconductor can deliver up to 2.5A current and it can have an input supply up to 32V DC. It has multiple micro-stepping options such as Full step, 1/2th Step, 1/4th Step, 1/8th […]