600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)
https://www.electronics-lab.com/project/600v-30a-ipm-module-carrier-board-for-variable-frequency-drive-vfd/
This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and […]
300W Off-line Power Factor Correction (PFC) Boost Converter
https://www.electronics-lab.com/project/300w-off-line-power-factor-correction-pfc-boost-converter/
The circuit presented here is a 300W off-line power factor correction (PFC) boost converter providing a nominal regulated output voltage of 375V @ 0.8A of load current. The project accommodates an input voltage range of 85V AC to 265VAC and uses average current mode control at a fixed programmable switching frequency of 116KHz. The project […]
Texas Instruments DRV8212 12V, 2A Low Voltage H-Bridge Motor Driver
https://www.electronics-lab.com/texas-instruments-drv8212-12v-2a-low-voltage-h-bridge-motor-driver/
Texas Instruments DRV8212 12V, 2A Low Voltage H-Bridge Motor Driver provides PWM, PH/EN, and half-bridge control interfaces and low-power sleep mode. The DRV8212 Motor Driver is integrated with four N-channel power FETs, a charge pump regulator, and protection circuitry. The triple charge pump architecture allows the device to operate down to 1.65V to accommodate 1.8V […]
Isolated 50 W Quarter-Brick DC/DC Converter – 0RQB-50Y Series
https://www.electronics-lab.com/isolated-50-w-quarter-brick-dc-dc-converter-0rqb-50y-series/
Bel Power Solutions’ DC/DC converters are offered in 5V, 12V, 15V, and 48V output options, with high input to output efficiency Bel Power Solutions’ 0RQB-50Y05x series isolated DC/DC converter provides 50 W of output power from wide input voltage ranges: 24 V, 48 V, 72 V, 96 V, and 110 V typical with a maximum of 154 V. The quarter-brick converters provide […]
Getting Started with Espressif’s ESP32-C3-DevKITM-1 on ESP-IDF
https://www.electronics-lab.com/getting-started-with-espressifs-esp32-c3-devkitm-1-on-esp-idf/
Espressif Systems’ ESP32-C3-DevKit M-1 is an entry-level development board with some interesting features, compatibility, adaptability, connectivity, security, and much more at an affordable price. The ESP32-C3-DevKit M-1 is also known for its small size and low power operation. Apart from this, it also provides a wide range of connection interfaces such as I2C, I2S UART, […]
Pine64 Unveils Quartz64 model A SBC for Developers and Linux Users Along with SOQuartz Module
https://www.electronics-lab.com/pine64-unveils-quartz64-model-a-sbc-for-developers-and-linux-users-along-with-soquartz-module/
Recently, we have seen the launch of the Firefly ROC-RK3566-PC mini-computer built around the Rockchip RK3566 chip. To continue the emergence of RK3566-powered development boards, the Quartz64, a single-board computer (SBC) has been released by Pine64. With the integrated powerful processor, the SBC provides access to a wide range of features. Pine64 has also unveiled […]
Vecow Launches EAC-2000 Series NVIDIA Jetson Xavier Fanless Embedded System
https://www.electronics-lab.com/vecow-launches-eac-2000-series-nvidia-jetson-xavier-fanless-embedded-system/
Featuring 6-core NVIDIA Carmel ARM® v8.2 64-bit CPU and 384-core NVIDIA Volta™ GPU, Vecow EAC-2000 Series features power-efficient in a small form factor to empower Edgae AI applications including Traffic Vision, Intelligent Surveillance, Auto Optical Inspection, Smart Factory, AMR/AGV, and any AIoT/Industry 4.0 applications. Vecow Co., Ltd., a team of global embedded experts, announced the […]
BHI260AP Self-Learning AI Smart Sensor
https://www.electronics-lab.com/bhi260ap-self-learning-ai-smart-sensor/
Bosch Sensortec’s all-in-one solution is ideal for always-on sensor applications such as machine learning analytics Bosch Sensortec’s BHI260AP provides an ideal all-in-one solution for always-on sensor applications such as fitness tracking, pedestrian positioning, machine learning analytics, and orientation estimation. The BHI260AP is a smart sensor that includes a wide variety of software functionalities, a 32-bit […]
R1810 Boost DC/DC Converter is an energy harvesting solution
https://www.electronics-lab.com/r1810-boost-dc-dc-converter-is-an-energy-harvesting-solution/
The R1810 Boost DC/DC Converter is an energy harvesting solution designed for powering low current consuming IoT devices by extracting energy from Photovoltaic cells. Target applications include wireless sensors, home and building automation, remote monitoring, presence detection, industrial equipment controls and more. Tailored specifically to replace the conventional batteries with power supplies operate with photovoltaic cells, […]
VoltLog’s CanLite is an ESP32-based CAN Bus Development Board
https://www.electronics-lab.com/voltlogs-canlite-is-an-esp32-based-can-bus-development-board/
Yet another development board featuring Espressif Systems’ powerful ESP32 microcontroller. VoltLog recently released the CanLite, a wireless CAN bus hacking, and development board built around an ESP32 microcontroller. But the CanLite was not meant to be a universal development board, because limited I/Os are available. However, it was designed as a development board tailored to […]