TINY DC-DC Power Module – Input 8-28V DC – Output 5V DC 1A
https://www.electronics-lab.com/tiny-dc-dc-power-module-input-8-28v-dc-output-5v-dc-1a/
This tiny power module is an easy-to-use integrated power solution that combines a 3A DC/DC converter chip with inbuilt power MOSFETs, an inductor, and passives into a 3-pin, through-hole package. The standard TO-220 pin-out allows a much-improved replacement of linear regulators packaged in this industry-standard footprint. The circuit provides much higher efficiency and output current […]
TSC210 – Low / High side bidirectional, zero-drift, current sense amplifiers
https://www.electronics-lab.com/tsc210-low-high-side-bidirectional-zero-drift-current-sense-amplifiers/
The TSC210, TSC211, TSC212, TSC213, TSC214 and TSC215 are a series of zero-drift current sense amplifiers that can sense current via a shunt resistor over a wide range of common mode voltages from -0.3 to +26 V, whatever the supply voltage is. They are available in three different versions, each of them having a different […]
Miniature Buck Converter Delivers 4A
https://www.electronics-lab.com/miniature-buck-converter-delivers-4a/
RECOM announces the RPX-4.0 cost-effective buck converter in a QFN package. RECOM has added a 4A option to its RPX series of miniature buck converters. The RPX-4.0 is rated to 3.8 to 36V input and programmable 1 to 7V output at 4A. With a compact 5mm x 5.5mm footprint and low 4.1mm height in a […]
Nordic Power management IC for nRF52/nRF53 Series SoCs
https://www.electronics-lab.com/nordic-power-management-ic-for-nrf52-nrf53-series-socs/
Nordic Semiconductor’s nRF52/nRF53 series of SOC (System On Chip) devices embed a powerful ARM microprocessor and is compatible with Bluetooth Low Energy and other communication standards. This compatibility provides the freedom to develop your wireless system using the technology that suits your application the best. These SOCs are power efficient, allowing you to make ultra-low […]
Component carriers replace flexible printed circuit boards in linear measuring systems
https://www.electronics-lab.com/component-carriers-replace-flexible-printed-circuit-boards-in-linear-measuring-systems/
HARTING has developed a component carrier that can be used directly with electronic components eliminating manual assembly and replacing flexible PCBs. Increasing precision and reducing assembly costs Component carriers are equipped with measuring sensors for detecting position The component carrier serves as a connecting element between a printed circuit board (PCB) and electronic components (such […]
Sensirion SHT4x Smart Gadget measures Humidity and Temperature
https://www.electronics-lab.com/sensirion-sht4x-smart-gadget-measures-humidity-and-temperature/
Sensirion SHT4x Smart Gadget is a simple reference design circuit board that demonstrates the performance and ease of use of Sensirion SHT4x Humidity and Temperature Sensors. This device features a Liquid Crystal Display (LCD) with humidity and temperature information. It also is equipped with a BLUETOOTH® Low Energy (BLE) module that enables communication with BLE-capable […]
Mighty Scope™ ClearVue Digital Microscope
https://www.electronics-lab.com/mighty-scope-clearvue-digital-microscope/
Aven’s digital microscope has an HDMI output for additional monitor viewing and can be mounted onto a variety of stands Aven’s Mighty Scope ClearVue digital microscope has a built-in 5″ high resolution LED screen and offers a magnification range of 8x to 25x. The included rechargeable battery allows users to operate the microscope without a […]
Bourns’ PER28/PER35/PER56 encoders feature a ring interface
https://www.electronics-lab.com/bourns-per28-per35-per56-encoders-feature-a-ring-interface/
Bourns’ PER28/PER35/PER56 encoders feature a ring interface that allows illumination or installation of other components in the center Bourns’ model PER28, PER35, and PER56 long-life incremental ring encoders come in sizes 28 mm, 35 mm, and 56 mm, respectively. These low-profile encoders are designed for use in professional audio and lighting applications, low/medium risk medical and […]
The new TiePie engineering Handyscope HS6 is 4 channel 1 GSa/s low noise USB 3.0 oscilloscope
https://www.electronics-lab.com/the-new-tiepie-engineering-handyscope-hs6-is-4-channel-1-gsa-s-low-noise-usb-3-0-oscilloscope/
The 4 channel 1 GSa/s low noise USB 3.0 oscilloscope packed with technology TiePie engineering has introduced the Handyscope HS6, a USB 3.0 oscilloscope packed with technology. This new four channel high resolution low noise oscilloscope is available in models with 200 MSa/s up to 1 GSa/s sampling rate, with several features that are unique […]
Maker Pi RP2040 Robot Controller Board for Motion Control Projects
https://www.electronics-lab.com/maker-pi-rp2040-robot-controller-board-for-motion-control-projects/
Cytron recently launched their second RP2040 board, the Maker Pi RP2040, designed for robots or motion-controlled applications. With this new RP2040 chip, you can now build your own interactive robot, the Otto DIY robot. The Maker Pi RP2040 combines the Raspberry Pi Pico with the Maker series goodness, as well as a robot controller and […]