TSV792 – High bandwidth (50MHz) Low offset (200µV) Rail-to-rail 5V Op amp
https://www.electronics-lab.com/tsv792-high-bandwidth-50mhz-low-offset-200%c2%b5v-rail-to-rail-5v-op-amp/
The TSV791 and TSV792 are single and dual 50 MHz-bandwidth unity-gain-stable amplifiers. The rail-to-rail input stage and the slew rate of 30 V/µs make the TSV791 and TSV792 ideal for low-side current measurement. The excellent accuracy provided by maximum input voltage of 200 µV allows amplifying accurately small-amplitude input signal. The TSV792 can operate from […]
MPM3860 Step-Down Power Module can achieve 6 A of continuous output
https://www.electronics-lab.com/mpm3860-step-down-power-module-can-achieve-6-a-of-continuous-output/
MPS’ MPM3860 1.2 MHz ultra-thin module can achieve 6 A of continuous output current over a wide input range with excellent load and line regulation MPM3860 from Monolithic Power Systems is a fully integrated, high-frequency, synchronous, rectified, step-down power module with an internal inductor. It offers a very compact solution to achieve 6 A of […]
pixxiLCD series from 4D Systems
https://www.electronics-lab.com/pixxilcd-series-from-4d-systems/
The new pixxiLCD graphic displays from 4D Systems are the ideal solution for easy integration. Due to the wide range of options offered by the embedded displays, developers can find the right full-color HMI for almost any application. The series is available at Rutronik UK. 4D LABS-configurable PIXXI-28 or PIXXI-44 GPUs enable a variety of […]
Switch debounce circuit uses only one gate
https://www.electronics-lab.com/switch-debounce-circuit-uses-only-one-gate/
The circuit in Figure 1 produces a single debounced pulse each time you press S1. Moreover, the circuit uses only logic power from the remote pull-up resistor, R2. You can use the circuit to detect when a key is pressed in a non-energized device, such as a device in a system that’s just coming up from […]
AMS AG TMF8805 ToF 1D time-of-flight sensor
https://www.electronics-lab.com/ams-ag-tmf8805-tof-1d-time-of-flight-sensor/
The TMF8805 is a time-of-flight (TOF) sensor in a single modular package with associated VCSEL The TMF8805 is a time-of-flight (TOF) sensor in a single modular package with associated VCSEL. The TOF device is based on SPAD, TDC, and histogram technology. The device achieves a 2500 mm detection range. Key features Direct ToF technology with […]
Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch
https://www.electronics-lab.com/texas-instruments-tmux6219-single-channel-21-spdt-switch/
Texas Instruments TMUX6219 Single Channel 2:1 (SPDT) Switch is a complementary metal-oxide semiconductor (CMOS) switch in a single channel, 2:1 (SPDT) configuration. The device works with single supply (4.5V to 36V), dual supplies (±4.5V to ±18V), or asymmetric supplies (such as VDD = 8V, VSS = –12V). The TMUX6219 supports bidirectional analog and digital signals […]
Elektor Project: Wi-Fi for LoRa Switch
https://www.electronics-lab.com/elektor-project-wi-fi-for-lora-switch/
Clemens Valens @ Elektor Labs writes: We published a remote-controlled switch in the March/April 2020 edition of Elektor magazine. It had state feedback and communicated using LoRa. Because it was housed in a waterproof IP66 enclosure, it was suitable for outdoor use. It was also a modular project with the relay and power circuitry on […]
Analog Devices Inc. ADPD188BI Integrated Optical Module
https://www.electronics-lab.com/analog-devices-inc-adpd188bi-integrated-optical-module/
Analog Devices Inc. ADPD188BI Integrated Optical Module is a complete photometric system for smoke detection using optical dual wavelength technology. The module integrates a highly efficient photometric front end, two light emitting diodes (LEDs), and two photodiodes (PDs). The module is housed in a custom package to prevent light from going from the LED to the photodiode without entering […]
Würth Elektronik WSEN-HIDS Humidity Sensor
https://www.electronics-lab.com/wurth-elektronik-wsen-hids-humidity-sensor/
Würth Elektronik WSEN-HIDS Humidity Sensor utilizes a calibrated and temperature-compensated digital output with low energy requirement to measure humidity and temperature with long-term stability. The WSEN-HIDS humidity sensor is based on advanced micro-electro-mechanical systems (MEMS) technology and is only 2mm x 2mm x 0.9mm in size. This sensor features an integrated analog-to-digital converter and temperature […]
Analog Devices CN0537 Reference Design for UL-217 Smoke Detector
https://www.electronics-lab.com/analog-devices-cn0537-reference-design-for-ul-217-smoke-detector/
Analog Devices CN0537 Reference Design for UL-217 Smoke Detector is designed to demonstrate the use of the ADPD188BI Integrated Optical Module in a smoke/fire detection application. The ADPD188BI optical module is a complete photometric system specifically designed for smoke detection applications. Using the ADPD188BI in place of traditional, discrete smoke detector circuits greatly simplifies the design as the […]