Bode Diagrams
https://www.electronics-lab.com/article/bode-diagrams/
Introduction It is in the late 30’s that an American engineer named Hendrick Wade Bode designs a famous representation to study AC circuits in the frequency domain. These graphs are still nowadays very useful in electronics and automatism and are called Bode diagrams. In this tutorial, we will give every necessary step in order to […]
Axiomtek’s eBOX710-521-FL – A Workstation-grade Fanless Embedded System for Edge Computing
https://www.electronics-lab.com/axiomteks-ebox710-521-fl-workstation-grade-fanless-embedded-system-edge-computing/
Axiomtek – a world-renowned leader relentlessly devoted in the research, development and manufacture of series of innovative and reliable industrial computer products of high efficiency – is proud to unveil its eBOX710-521-FL, a fanless embedded system powered by the workstation-grade Intel® Xeon® processor with the Intel® C246 chipset. It is also capable of offering the best […]
CISSOID announces 3-Phase SiC MOSFET Intelligent Power Module for E-mobility
https://www.electronics-lab.com/cissoid-announces-3-phase-sic-mosfet-intelligent-power-module-e-mobility/
CISSOID, the leader in high temperature semiconductors for the most demanding markets, announces today a new 3-Phase SiC MOSFET Intelligent Power Module (IPM) platform for E-mobility. This new IPM technology offers an all-in-one solution including a 3-Phase water-cooled SiC MOSFET module with built-in gate drivers. Co-optimizing the electrical, mechanical and thermal design of the power […]
FWS-2275: Solution for Secure Industrial Networks
https://www.electronics-lab.com/fws-2275-solution-secure-industrial-networks/
AAEON, an industry leader in hardware solutions, announces their latest network appliance, the FWS-2275. Built rugged and designed to power a range of network applications, the FWS-2275 brings vital functions and security to industrial networks. As more and more industries move towards connecting sites and devices through edge computing and Industrial IoT (IIoT) environments, network […]
36V, 600mA DC-DC Converters with Integrated Inductors
https://www.electronics-lab.com/36v-600ma-dc-dc-converters-integrated-inductors/
Torex Semiconductor Ltd. has launched the XCL230/XCL231 as a new series of low supply current, 36V, 600mA step-down dc-dc converters with integrated inductors. Integrating the coil makes for easier circuit board layout and minimizes malfunction and noise from the component and wiring layout. The input voltage range is 3.0- to 36-V, the switching frequency is […]
Bringing Low Power Machine Learning to Endpoint IoT Devices
https://www.electronics-lab.com/bringing-low-power-machine-learning-endpoint-iot-devices/
QuickLogic Corporation and Antmicro jointly-announced QuickFeather™, a small form factor development board designed to enable the next generation of low-power Machine Learning (ML) capable IoT devices. On top of the open source hardware design, available on GitHub today, Antmicro has also added support for the QuickFeather board in the Zephyr Real Time Operating System (RTOS) […]
ON Semiconductor NFAQ1060L36T Intelligent Power Module (IPM)
https://www.electronics-lab.com/semiconductor-nfaq1060l36t-intelligent-power-module-ipm/
NFAQ1060L36T – Three-phase 10 A / 600 V IGBT module with integrated drivers using DBC substrate. The NFAQ1060L36T is a fully-integrated inverter power stage consisting of a high-voltage driver, six IGBT’s and a thermistor, suitable for driving permanent magnet synchronous (PMSM) motors, brushless-DC (BLDC) motors and AC asynchronous motors. The IGBT’s are configured in a […]
Free Elektor Article: Current Transformer for Oscilloscopes
https://www.electronics-lab.com/free-elektor-article-current-transformer-oscilloscopes/
Commercial current clamp devices certainly are able to measure current by potential-free means but they are not suitable for capturing rapid alterations in current over time. In addition, many low-cost examples of these do not provide an output for connecting to an oscilloscope. Here now comes a DIY alternative. Original publication: Elektor Magazine 2/2018 (March […]
EBC3A1-1G Y0: the Optimum Embedded Board for ATM Kiosks and Vending Machines
https://www.electronics-lab.com/ebc3a1-1g-y0-optimum-embedded-board-atm-kiosks-vending-machines/
EMBUX introduces its newest ARM embedded board, the EBC3A1-1G Y0, particularly intended for machine manufacturers and system integrators. The embedded board is selectively based on the NXP ARM Cortex-A9 i.MX6 processor to ensure high performance at a lower cost. With multiple, distinct I/Os, the sky’s the limit as to how to connect the EBC3A1-1G Y0 […]
DIY 18650 Powerwall with onboard BMS
https://www.electronics-lab.com/diy-18650-powerwall-onboard-bms/
peter6960 shared a new project. It’ s about a 18650 cells power brick with onboard battery management system. He writes: While I cannot afford a Tesla PowerWall, I’ve spent some time drawing up a PCB to house 7x 18650 cells in series. Each board has onboard Battery Management: Overvoltage Protection (per cell) Undervoltage Protection (per […]