How to Design a Lithium Battery Pack
https://www.electronics-lab.com/design-lithium-battery-pack/
Adam Bender writes: Designing a custom lithium battery pack is a fun way to learn about electricity and engineering. Lithium batteries can be used for countless applications including electric bikes, scooters, vehicles, backup power suppliers, off the grid solutions, and much more. How Lithium Battery Cells Work Basic Electricity Fundamentals How Many Cells to Put […]
Tesmo – The Invisible & Portable Adhesive Laptop Stand quick review
https://www.electronics-lab.com/tesmo-invisible-portable-adhesive-laptop-stand-quick-review/
Tesmo Kickstand weighs only 17g yet able to hold up to 17.6lbs, and the reusable design gives you the mobile convenience than ever. Tesmo Kickstand is a great little accessory for your laptop, but not limited. It can easily be used on tablets and mobile phones as well. It’s a lightweight and foldable stand that […]
TechNexion XORE is a tiny NXP i.MX 8M Mini LGA System-on-Module
https://www.electronics-lab.com/technexion-xore-tiny-nxp-mx-8m-mini-lga-system-module/
There are several ways to design a system-on-module to carrier board interface, one method is to design an LGA (Land Grid Array) module, which have to be soldered straight unto the carrier board, and enables much more compact system-on-modules, and that’s exacty what TechNexion has done with their XORE family of LGA system-on-module currently powered […]
Mesh networking modules ease IoT device design
https://www.electronics-lab.com/mesh-networking-modules-ease-iot-device-design/
Silicon Labs has introduced a new range of integrated, secure Wireless Gecko modules which make it easier to add robust mesh networking connectivity. By Ally Winning @ eenewsembedded.com MGM210x and BGM210x Series 2 modules support Zigbee, Thread, Bluetooth mesh, Bluetooth Low Energy and multiprotocol connectivity. The xGM210x modules are pre-certified for North America, Europe, Korea […]
iWave Systems Ultra-High-Performance FPGA Platforms for AI/ML accelerated Edge Computing in IoT applications
https://www.electronics-lab.com/iwave-systems-ultra-high-performance-fpga-platforms-ai-ml-accelerated-edge-computing-iot-applications/
With the advent of IoT and the proliferation of connected embedded devices, one of the biggest challenges in developing competitive IoT solutions is the ability to bring intelligence at the Edge of the IoT networks. Edge computing is crucial in IoT applications as it paves the way for faster real-time inference by embedding computation capability […]
Seeed Opens Pre-Orders for NPi i.MX6ULL Dual-Ethernet Dev Board
https://www.electronics-lab.com/seeed-opens-pre-orders-npi-mx6ull-dual-ethernet-dev-board/
SeeedStudio recently announced that they have started taking pre-orders for their new NPi i.MX6ULL – Linux SBC Development boards. The board is a low-power, linux-based single board computer and can be referred to as essentially a breakout board on steroids for the i.MX6ULL COM (Computer-on-module) chip. It is targetted at industrial applications with several features […]
The ultimate low-cost massive MIMO SDR, with up to 32×32 transmit/receive channels
https://www.electronics-lab.com/ultimate-low-cost-massive-mimo-sdr-32x32-transmit-receive-channels/
XYNX (pronounced ikz-sync) is being launched on Crowdsupply by Fairwaves. it is based on the success of the Octopack SDR (software-defined radio) and the feedback the firm received from the original Octopack users. It is designed for situations or use cases that involve large band of spectrum monitoring or massive MIMO system and it comes […]
HealthyPi v4 Wearable WiFi Vital Signs Monitor Follows Raspberry Pi HAT Form Factor
https://www.electronics-lab.com/healthypi-v4-wearable-wifi-vital-signs-monitor-follows-raspberry-pi-hat-form-factor/
Following the success of their HealthyPI V3, ProtoCentral has launched a CrowdSupply campaign for an upgrade to the HealthyPi V3 simple called the HealthyPi v4. The HealthyPi V4 just like the V3 is a vital signs monitoring dev kit, that provide users with the opportunity to monitor parameters like the body temperature, oxygen saturation, and […]
Getting started with the new ATtiny chips – Programming the Microchip’s 0-series and 1-series ATtiny with the Arduino IDE
https://www.electronics-lab.com/project/getting-started-with-the-new-attiny-chips-programming-the-microchips-0-series-and-1-series-attiny-with-the-arduino-ide/
A few years back, Microchip/Atmel announced the release of a completely new range of chips designed to serve as replacements for their older ATmega and ATtiny ranges. The new ATtiny chips started with the 1-series which included ATtiny417 and ATtiny817, which was followed in 2018 by the cheaper 0-series microcontrollers which included microcontrollers like the […]
Microsoft AI Developer Kit Runs Linux On Qualcomm SoC
https://www.electronics-lab.com/microsoft-ai-developer-kit-runs-linux-qualcomm-soc/
Microsoft has announced a $249 “Vision AI Developer Kit, aimed at AI edge developers using Azure IoT Edge and Azure Machine Learning. The kit features an 8MP, 4K camera which runs Linux on Qualcomm’s 10nm, AI-enabled QCS603 SoC. The Vision AI Developer Kit incorporates Qualcomm’s Vision Intelligence Platform, which is infused into its QCS603 SoC, […]