Murata Unveils Type 1SC-iSIM Module With “Out-of-the-Box” Connectivity
https://www.electronics-lab.com/news/murata-unveils-type-1sc-integrated-sim-module-with-out-of-the-box-connectivity/
Murata has directly integrated SIM functionality into its Type 1SC module, saving space and simplifying connectivity in compact, low-power IoT applications.
Excamera Labs TermDriver 2 USB-to-Serial Adapter with RP2040 MCU and Built-in Display
https://www.electronics-lab.com/news/excamera-labs-termdriver-2-usb-to-serial-adapter-with-rp2040-mcu-and-built-in-display/
TermDriver 2 is an RP2040-based USB-to-serial adapter with a built-in display, standalone console mode, ANSI support, 2Mbps speed, 32KB buffer, and zero data loss design.
Multi-channel Sampling Analog Comparator (MS-ACMP)
https://www.electronics-lab.com/news/multi-channel-sampling-analog-comparator-ms-acmp/
This article provides step-by-step recommendations for using the multi-channel sampling analog comparator (MS-ACMP) within the Renesas SLG47003. This project utilizes a combination of analog and digital components, creating a precise and flexible system for monitoring input signals and generating digital outputs based on specified threshold levels. The system monitors three voltage levels and detects when any of these levels fall outside of their allowable window, ensuring reliable operation and accurate signal management.
High Current Isolated Gate Driver for IGBTs
https://www.electronics-lab.com/project/high-current-isolated-gate-driver-for-igbts/
The project design features a galvanically isolated single-channel gate driver IC with a dedicated isolated DC-DC gate drive power supply providing bipolar output of +15V/-9V. This compact module is designed to control IGBTs in inverters, offering high gate driver currents up to 14A for applications like half-bridge, full-bridge, and single IGBT. The driver operates in two modes, non-inverting and inverting, with a minimum input pulse width to filter glitches. The output driver section uses MOSFETs for rail-to-rail output to control gate voltage during on-state and short circuits efficiently. This setup is suitable for use with various IGBT voltages and features optimizations for high-frequency operations.
New Intel Core Ultra 200H-Powered Developer Board Provides up to 97 TOPs
https://www.electronics-lab.com/news/aaeon-introduce-an-intel-core-ultra-200h-powered-developer-board-with-up-to-97-tops-of-ai-performance/
The UP Xtreme ARL from AAEON targets AI applications by combining the features of the new Intel Core Ultra 200H Series with industrial-grade I/O and rugged design features.
New TVS Diode Family for Automotive Applications
https://www.electronics-lab.com/news/new-tvs-diode-family-for-automotive-applications/
TI released its new TSDxx-Q1 family of unidirectional transient voltage suppression (TVS) diodes with reverse stand-off voltages from 12 to 36 V.
AAEON Leverages MediaTek Genio SoCs for its Latest SMARC Modules
https://www.electronics-lab.com/news/aaeon-leverages-mediatek-genio-socs-for-its-latest-smarc-modules-the-ucom-m700-and-ucom-m510/
The uCOM-M700 and uCOM-M510 combine the MediaTek Genio platform with flexible multimedia capabilities to provide industrial-grade SMARC modules.
RIGOL’s DS80000 Oscilloscope Targets High-Frequency Design and Protocol Compliance
https://www.electronics-lab.com/news/rigols-ds80000-oscilloscope-targets-high-frequency-design-and-protocol-compliance/
The new series is an 8th-generation digital oscilloscope offering up to 13 GHz bandwidth and 40 GSa/s sample rate for high-speed signal analysis and protocol compliance testing.
Toshiba’s Switched Mode Power Supply Library: A Tool for Power Supply Circuit Design
https://www.electronics-lab.com/news/toshibas-switched-mode-power-supply-library-a-tool-for-power-supply-circuit-design/
With the Switched Mode Power Supply Library, you can select and download various circuit designs based on your actual requirements to verify the behavior of MOSFETs in your simulation environment.
Half-Bridge Driver with Inbuilt Oscillator
https://www.electronics-lab.com/project/half-bridge-driver-with-inbuilt-oscillator/
This project is a Half Bridge with Inbuilt Oscillator utilizing the NCP1392B MOSFET driver and IRF540 MOSFETs for half-bridge topology applications. It allows for adjustable operating frequency from 25 kHz to 100 kHz with a trimmer potentiometer. The project includes brown-out protection, a PFC delay timer, and fixed dead time to improve performance. Designed for low-voltage applications up to 36V and 3A load current with forced air cooling, it can be modified for high-voltage use up to 400V by changing components like capacitors and MOSFETs. The operating frequency can be tuned up to 480 kHz depending on component values, with recommendations to consult the datasheet for optimal performance in higher frequency applications.