Texas Instruments LMR360xx/LMR360xx-Q1 Step-Down Converters
https://www.electronics-lab.com/texas-instruments-lmr360xx-lmr360xx-q1-step-converters/
Operating input range from 4.2V to 60V. 2mm x 3mm HotRod™ QFN package. Junction temperature range from -40°C to 150°C. 26µA quiescent current. The list of amazing features is long. And that’s before you see the eye-popping efficiency plots. LMR36006/15 are the industrial buck converters you’ve been looking for. Texas Instruments LMR360xx/LMR360xx-Q1 Step-Down Converters are […]
Simple DataFlash board plugs into an Arduino to provide 4Mbytes of EEPROM
https://www.electronics-lab.com/simple-dataflash-board-plugs-arduino-provide-4mbytes-eeprom/
This is a small board that plugs into one of the headers on an Arduino Uno or other board to provide 4Mbytes of non-volatile storage. by David Johnson-Davies: It works with either 5V or 3.3V boards, and is based on the low-cost 4Mbyte Winbond W25Q32FVSIG DataFlash chip. It is ideal for applications such as data […]
SDG1032X 30MHz Function / Arbitrary Waveform Generator
https://www.electronics-lab.com/sdg1032x-30mhz-function-arbitrary-waveform-generator/
SIGLENT’s NEW SDG1000X series dual-channel function/arbitrary waveform generators with specifications that include up to 60 MHz maximum bandwidth, 150 MSa/s sampling rate and 14-bit vertical resolution. The proprietary EasyPulse technique helps to solve the weaknesses inherent in traditional DDS generators when generating pulse waveforms, and the special square generator is capable of generating square waveforms […]
PC based Spectrometer using AS7265X spectrum sensors
https://www.electronics-lab.com/pc-based-spectrometer-using-as7265x-spectrum-sensors/
Our friends on open-electronics.org published a new project based on AS7265X spectrum sensors family. by Boris Landoni After this introduction we enter into the merits of the project, which consists in developing a PC spectrometer obtained by connecting to the USB port (which is now a standard for Personal Computers and “mobile” devices such as […]
Cloom Published a new Article: “Wiring Harness: The Ultimate Custom Guide”
https://www.electronics-lab.com/cloom-published-wiring-harness-ultimate-custom-guide/
Cloom, a reliable wire harness, and cable assemblies manufacturer, today published a “Wiring Harness: The Ultimate Custom Guide.” It has eight chapters that cover some useful terms about Wiring Harness knowledge. The publication is available here for free. This guide sheds insightful light on these Wiring Harness properties. “The Cloom R&D team adapts quickly to […]
OurPCB Published a new Article: “How to choose PCB substrate material”
https://www.electronics-lab.com/ourpcb-published-article-choose-pcb-substrate-material/
SHIJIAZHUANG, China, July 11, 2019 (Newswire.com) –OurPCB, a multi-national PCB Manufacturing, and PCB Assembly company， The publication is available on the https://www.ourpcb.com/pcb-substrate-material.html section of the company’s website for free. It has six chapters that cover every detail about PCB Substrate Material. Among the key subjects on PCB Substrate Material include: Copper Foil Requirements: This section […]
AOPEN DE5500 – SFF PC features 7th generation Intel® Core
https://www.electronics-lab.com/aopen-de5500-sff-pc-features-7th-generation-intel-core/
The Digital Engine DE5500 is supported by the 7th generation Intel® Core(available in i3, i5 and i7). It consumes little power due to the of this mobile processor. It supports a DDR4 dual channel memory with a maximum capacity of 32GB. The standard Digital Engine small form factor can easily be integrated into a kiosk […]
Norman – Arduino Library for climatic simulation of natural daylight, temperature, and humidity cycles
https://www.electronics-lab.com/norman-arduino-library-climatic-simulation-natural-daylight-temperature-humidity-cycles/
Norman is a climatic simulation library designed to run on an Arduino Uno for indoor and greenhouse automation projects. Arduino Library for mathematical climatic simulation of natural daylight, temperature, and humidity cycles using minimal data sets. Given a set of parameters for a target locale, the library returns values for temperature, dew point, Relative Humidity, […]
nanoSplatch™ nSP250 Embedded WiFi/WLAN Antenna
https://www.electronics-lab.com/nanosplatch-nsp250-embedded-wifi-wlan-antenna/
The nanoSplatch™ nSP250 is a surface-mount antenna for embedded WiFi/WLAN and other 2.4 GHz or 5.8 GHz ISM or U-NII frequency band applications. It uses a grounded-line technique to achieve outstanding performance in a tiny surface-mount package. The nSP250 exhibits low proximity effect with a very hemispherical radiation pattern, making it ideal for handheld devices […]
Build a Cluster Computer using 7x Raspberry Pi Compute Modules
https://www.electronics-lab.com/build-cluster-computer-using-7x-raspberry-pi-compute-modules/
In the spirit of cluster computing, the Turing Pi Clusterboard brings another dimension in the world of cluster computing for makers and hackers. The Pimoroni’s Cluster HAT gave us the power to connect up to 4 Raspberry Pi Zeros to create a cluster computer, the MiniNodes’ 5 Node Raspberry Pi 3 CoM Carrier Board provide support […]