CAPA84R – 3.5″ Embedded SBC with Intel® Celeron® Processor


https://www.electronics-lab.com/capa84r-3-5-embedded-sbc-intel-celeron-processor/

3.5″ Embedded SBC with Intel® Celeron® Processor J1900/J1800, LVDS, VGA, DisplayPort, Three GbE LANs and Audio. CAPA84R, is a fanless 3.5-inch embedded motherboard powered by the Intel® Celeron® processor J1900 quad-core or J1800 dual-core. The CPU is located at the rear side of the motherboard, which further aids the heat-extraction process and simplifies maintenance procedures. […]

u-blox ZOE-M8B tiny GNSS SiP module


https://www.electronics-lab.com/u-blox-zoe-m8b-tiny-gnss-sip-module/

Ultra small, super low power u-blox M8 GNSS SiP module. ZOE-M8B is u-blox’s ultra small, highly integrated GNSS SiP (System in Package), measuring just 4.5 x 4.5 x 1.0 mm. Making use of the Super-Efficient (Super-E) mode, ZOE-M8B offers an ideal balance between miniature size, low power consumption and good GNSS performance. ZOE-M8B uses up […]

SONY IMX290 HDMI Microscope Camera has 180x magnification, excellent image quality and is Autofocus


https://www.electronics-lab.com/sony-imx290-hdmi-autofocus-microscope-camera-180x-excellent-image-quality/

This is an Autofocus SONY IMX290 Industry Microscope Camera with HDMI output, ideal for PCB inspection and board repair work. This microscope has some great reviews among professionals and hobbyists and is priced at €466 without the standing base, monitor and LED light. It’s resolution is 1080P FULL HD @ 60FPS with integrated UI menu […]

Power DUO Source 200 W USB-C PD Reference Design


https://www.electronics-lab.com/power-duo-source-200-w-usb-c-pd-reference-design/

This USB Power Delivery (PD) reference design will allow users to implement system that require more than 100 W as a power source while also highlighting the industries lowest RDSon solution. The design can output all four of the standard USB Type-C PD source voltages of 5 V, 9 V, 15 V, and 20 V. […]

SuperB – An open, Bee-compatible ESP32


https://www.electronics-lab.com/superb-open-bee-compatible-esp32/

SuperB is an open source, Bee–compatible ESP32 module for quickly and easily adding Wi-Fi and Bluetooth to your project. It combines the popularity of ESP32 with the XBee form factor to achieve an easy way of adding wireless connection to your board. It was originally build for use with Macchina M2 ODB2 scanner, check details […]

FDK introduces high voltage/ultra small size 3V all-solid-state SMD battery


https://www.electronics-lab.com/fdk-introduces-high-voltage-ultra-small-size-3v-solid-state-smd-battery/

FDK CORPORATION will begin sample shipment of oxide based all-solid-state battery using high electrochemical potential cathode material “lithium cobalt pyrophosphate (Li2CoP2O7)” which was jointly developed with Fujitsu Laboratories Ltd. February 2017. While applications using various batteries such as IoT devices and wearable devices expand and progress, the specifications required for batteries are becoming increasingly diverse, […]

Dual Channel Arbitrary Function Generator with 40 to 240MHz models


https://www.electronics-lab.com/dual-channel-arbitrary-function-generator-40-240mhz-models/

Sine frequency up to 240MHz with 1μHz resolution Up to 100MHz high resolution pulse generator Arbitrary waveforms up to 16bits at 800MSa/s Wideband noise generator. The TGF4000 Series out-performs other generators in its price range by offering models at up to 240MHz with low harmonic distortion and phase noise. Audio band THD is significantly better […]

Rohde & Schwarz NGL200 Power supply series


https://www.electronics-lab.com/rohde-schwarz-ngl200-power-supply-series/

IoT and mobile communications are targeted by the R&S NGL200 power supplies from Rohde & Schwarz. The architecture allows them to function both as a source and a sink, while short recovery times of 30 microseconds enable them to handle fast load changes that occur, for example, when a device switches from sleep mode to […]

Use RC522 RFID module with Arduino and an OLED display – RFID lock


https://www.electronics-lab.com/project/rfid-rc522-arduino-uno-oled-display/

RFID is one of these technologies that change how we interact with other electronic devices and things in our environment. It is used in every application where some unique identifier is required, from retail to security and is also leading the path along several futuristic innovations with RFID based human implants among others. This wide […]

How to use the Atmel ATTINY10 Microcontroller


https://www.electronics-lab.com/use-atmel-attiny10-microcontroller/

Here is a nice video from Ben Heck describing how to program and use the smallest AVR microcontroller, the ATTINY10. He covers, how to wire a small converter and an AVR High Voltage Programmer, how to get started with Atmel Studio 7 and basic I/O, how to blink a LED and view the signal with an […]