Digital Potentiometer using Optical Encoder – 10KOhms


https://www.electronics-lab.com/news/digital-potentiometer-using-optical-encoder-10kohms/

The primary application of the project is to replace the mechanical potentiometer with optical encoder which is long life, accurate, smooth in operation. The simple project has been designed around LS7184 quadrature clock converter IC from LSI semiconductor, AD5220-10 Digital potentiometer from Analog Devices, and optical encoder from Burns. Quadrature clocks derived from optical encoder, […]

Digital Potentiometer using Optical Encoder – 10KOhms


https://www.electronics-lab.com/project/digital-potentiometer-using-optical-encoder-10kohms/

The primary application of the project is to replace the mechanical potentiometer with optical encoder which is long life, accurate, smooth in operation. The simple project has been designed around LS7184 quadrature clock converter IC from LSI semiconductor, AD5220-10 Digital potentiometer from Analog Devices, and optical encoder from Burns. Quadrature clocks derived from optical encoder, […]

Harmonic Drive & Brushed DC Servo Motor Driver


https://www.electronics-lab.com/project/harmonic-drive-brushed-dc-servo-motor-driver/

The SERVO Motion Control Board is maybe the fastest and lowest-cost way of getting your DC servo motor up and running. The clear, explicit documentation and the Windows test utility program take the mystery out of servo motor control. The board is designed for easily adding additional axes of control without flipping dip switches or […]

How to Setup an LCD Touchscreen on the Raspberry Pi


https://www.electronics-lab.com/news/setup-lcd-touchscreen-raspberry-pi/

circuitbasics.com has a tutorial on how to setup a LCD screen for Raspberry Pi. In this tutorial, I’ll walk you through the process of installing an LCD touchscreen on the Raspberry Pi, step by step. Many LCD touchscreens for the Raspberry Pi include an image file that you can write to your SD card and get […]

CMOS-TTL QUADRATURE ENCODER USING LS7084


https://www.electronics-lab.com/news/cmos-ttl-quadrature-encoder-using-ls7084/

The quadrature LS7084 Module is a CMOS quadrature clock converter. Quadrature clocks derived from optical or magnetic encoders, when applied to the A and B inputs of the LS7084 are converted to strings of a Clock and an Up/down direction control. These outputs can be interfaced directly with standard Up/Down counters for direction and position […]

CMOS-TTL QUADRATURE ENCODER USING LS7084


https://www.electronics-lab.com/project/cmos-ttl-quadrature-encoder-using-ls7084/

The quadrature LS7084 Module is a CMOS quadrature clock converter. Quadrature clocks derived from optical or magnetic encoders, when applied to the A and B inputs of the LS7084 are converted to strings of a Clock and an Up/down direction control. These outputs can be interfaced directly with standard Up/Down counters for direction and position […]

LTC4380 Overvoltage Protection


https://www.electronics-lab.com/news/ltc4380-overvoltage-protection/

Thomas Scherer @ elektormagazine.com writes: When it comes to protecting sensitive circuitry from potentially damaging over-voltage spikes and supply surges we usually resort to networks of coils, capacitors, resistors and suppression diodes to iron out the transients. The LTC4380 low quiescent current surge stopper IC from Linear Technology goes about it in a different way; […]

SensorTile, An Accurate Development Kit For Biometric Wearables


https://www.electronics-lab.com/news/sensortile-accurate-development-kit/

Valencell, a biometric wearable sensor technology company, in partnership with STMicroelectronics, an electronics and semiconductor manufacturer, announced a new highly accurate and scalable development kit for biometric wearables. The kit combines ST’s compact SensorTile turnkey multi-sensor module with Valencell’s Benchmark biometric sensor system. The SensorTile is a tiny IoT module (13.5mm x 13.5mm) that features […]

RGBdigit clock


https://www.electronics-lab.com/news/rgbdigit-clock/

by Lucky @ elektormagazine.com build a LED display clock able to display temperature, humidity and air pressure. He writes: What do you do when you want to design ‘something’ with a vintage or modern display? A clock of course, and this is our first design with RGBDigits: multi-colour 7-segment displays. With a BME280 breakout board […]

Arduino Tutorial: Menu on a Nokia 5110 LCD Display Tutorial


https://www.electronics-lab.com/news/arduino-tutorial-menu-nokia-5110-lcd-display-tutorial/

In this easy Arduino Tutorial educ8s.tv is going to show us how to create a Menu on a Nokia 5110 LCD display. This is the project we are going to build. In the display a simple menu appears, and with the help of three buttons I can navigate up, or down and select a menu […]