NanoPi NEO is an $8 Ubuntu board
https://www.electronics-lab.com/nanopi-neo-8-ubuntu-board/
The NanoPi NEO is another fun board developed by FriendlyARM for makers, hobbyists and fans and costs $8. It is based on Allwinner H3, Quad-core Cortex-A7 Up to 1.2GHz and comes with DDR3 RAM: 256MB/512MB versions and USB and Ethernet connectivity. NanoPi NEO is an $8 Ubuntu board – [Link]
DiXi – arduino sam D11 usb stick
https://www.electronics-lab.com/dixi-arduino-sam-d11-usb-stick/
atsamd11c14 Arduino zero compatible ARM M0 compact usb stick: DiXi is atsamd11c14 based development board. Onboard button and 7 segment display … or RGB led … I am now more decided for display – edge connector – nice compact shape like my Picoduino DiXi – arduino sam D11 usb stick – [Link]
4 Channel RF Remote Controller
https://www.electronics-lab.com/4-channel-rf-remote-controller/
4 Channel RF remote built using PT2262 and PT2272-M4 IC from Princeton technology. PT2262 used as Encoder (Transmitter) and PT2272-M4 Decoder (Receiver) ICs are heart of the project. The receiver provides 4 channel Momentary outputs. All outputs are TTL level can be interface with other circuits or relay board. Transmitter works with 5V to 12V […]
4 Channel RF Remote Controller
https://www.electronics-lab.com/project/4-channel-rf-remote-controller/
4 Channel RF remote built using PT2262 and PT2272-M4 IC from Princeton technology. PT2262 used as Encoder (Transmitter) and PT2272-M4 Decoder (Receiver) ICs are heart of the project. The receiver provides 4 channel Momentary outputs. All outputs are TTL level can be interface with other circuits or relay board. Transmitter works with 5V to 12V […]
Arduino-compatible touch-enabled display shield from FTDI
https://www.electronics-lab.com/arduino-compatible-touch-enabled-display-shield-ftdi/
CleO is a simple to program, intelligent TFT display solution that allows the construction of human machine interfaces (HMIs) with – says maker FTDI chip – much higher performance than conventional Arduino display shields are able to deliver. by Graham Prophet [via] FTDI first introduced its Arduino-compatible concept – aiming to reach a wider audience […]
Omniblox – Eagle BRD 3D viewer
https://www.electronics-lab.com/omniblox-eagle-brd-3d-viewer/
Omniblox is a very good 3D Eagle .brd 3D viewer created by Benjamin D. Richards and David ten Have, but some script knowledge is needed to use it. Looking to render printed circuit boards (PCBs)? Look no further. This script loads and renders them visually using a .brd file created by CadSoft EAGLE (version 6.0 […]
9 VDC Regulated Power Supply
https://www.electronics-lab.com/9-vdc-regulated-power-supply/
Tiny low current 9 VDC Regulated Power supply designed around bipolar transistor and zener diode. The circuit is known as series voltage regulator or emitter follower voltage regulator. The unregulated supply fed to input and the circuit regulate the voltage and provide constant 9V DC, 250mA. The zener diode provides the reference voltage to the […]
9 VDC Regulated Power Supply
https://www.electronics-lab.com/project/9-vdc-regulated-power-supply/
Tiny low current 9 VDC Regulated Power supply designed around bipolar transistor and zener diode. The circuit is known as series voltage regulator or emitter follower voltage regulator. The unregulated supply fed to input and the circuit regulate the voltage and provide constant 9V DC, 250mA. The zener diode provides the reference voltage to the […]
Easy Pulse mikro – MikroBus form factor pulse sensor
https://www.electronics-lab.com/easy-pulse-mikro-mikrobus-form-factor-pulse-sensor/
Raj @ embedded-lab.com has designed a new version of his Easy Pulse Sensor. This revision is an add-on board in mikroBus form factor, which enables easy integration with mikroElektronika‘s numerous development boards. It also operates on the principle of transmittance photoplethysmography applied to a fingertip using infrared sensors. Easy Pulse mikro provides all necessary instrumentation and […]
Berkeley Lab makes graphene-MoS2 transistor
https://www.electronics-lab.com/berkeley-lab-makes-graphene-mos2-transistor/
U.S. Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) has developed a way to assemble transistors based on the 2D materials graphene and molybdenum disulfide. By Peter Clarke @ edn-europe.com The method etches narrow channels in conducting graphene laid down on a silicon-dioxide substrate. These channels are then filled with a transition-metal dichalcogenide, or […]