1200V Inverter Module for 3 Phase Motors up to 2KW
https://www.electronics-lab.com/project/1200v-inverter-module-for-3-phase-motors-up-to-2kw/
The power board described here is designed for motor applications, featuring the 6ED2230S12T gate driver IC and FP15R12W1T4 IPM power module from Infineon. It provides an AC input and a 3-phase power output, with a single emitter shunt for current sensing and a voltage divider for DC-link voltage measurement. The board includes an LM1117S33 linear […]
3-Phase Advance Motion Module – 400VDC – 4A
https://www.electronics-lab.com/project/3-phase-advance-motion-module-400vdc-4a/
This is an advanced Motion module providing a fully featured, high-performance inverter output stage for AC induction, BLDC and PMSM motors such as refrigerators, fans, and pumps. This module is based on NFA50460 chip which integrates the optimized gate drive of the built−in IGBTs (FS4 RC IGBT technology) to minimize EMI and losses, while also […]
High Voltage 3-Phase Full-Wave PWM Brushless Motor Driver
https://www.electronics-lab.com/project/high-voltage-3-phase-full-wave-pwm-brushless-motor-driver/
The project presented here is a three-phase sinewave PWM driver for high-voltage brushless motors. The board is built using TB67B000AHG chip, which is a high-voltage IC capable of handling 600V. The TB67B000AHG has a 2-in-1 (MCP) structure of controller (sine-wave PWM / wide-angle conduction) and a high-voltage driver. The rotation speed of a DC brushless […]
350W Power Factor Boost Converter for Inverter-Fed BLDC and PMSM Motors
https://www.electronics-lab.com/project/350w-power-factor-boost-converter-for-inverter-fed-bldc-and-pmsm-motors/
This 350W power factor boost converter is designed for inverter-fed BLDC/PMSM motor appliances, A/C units, Refrigerators, and industrial power supplies. The circuit is a continuous-conduction-mode boost converter implemented using a UCC28180 PFC controller module which provides all the necessary built-in protections. It’s a robust output supply protected for output cover current, output over-voltage, and output […]
Programmable Step-Direction Pulse Generator for Stepper, BLDC and AC Servo Motor Drivers
https://www.electronics-lab.com/project/programmable-step-direction-pulse-generator-for-stepper-bldc-and-ac-servo-motor-drivers/
A programmable pulse generator is a very useful tool for stepper, BLDC, and AC servo drivers. Various stepper and servo drivers work with step and direction inputs. This project is the right solution to drive such drivers since it can provide a high-frequency output which is important for most AC servo drivers. The project provides […]
3-Phase Brushless DC Sinusoidal Sensorless Fan Motor Driver
https://www.electronics-lab.com/project/3-phase-brushless-dc-sinusoidal-sensorless-fan-motor-driver/
Driving a low current 3 phase brushless Sensorless DC motor is very easy with this project. This Full-wave BLDC driver project is capable to drive low current brushless fan motor without a hall sensor. 180° sinusoidal drive, high torque output, and silent drive are a few key features of the project. Due to their adaptive […]
BLDC Motor and DC Brushed Motor Driver
https://www.electronics-lab.com/project/bldc-motor-and-dc-brushed-motor-driver/
This BLDC motor driver board is equipped with a smart IFX007T half-bridge. The BLDC motor control project is capable to drive one BLDC motor. Alternatively, it can be used to drive one or two bi-directional DC motors (H-Bridge configuration, cascaded to support the second motor) or up to three uni-directional DC motors (half-bridge configuration). The […]
Signal Conditioner for Sensorless BLDC Operations
https://www.electronics-lab.com/project/signal-conditioner-for-sensorless-bldc-operations/
This is a back EMF signal conditioning circuit that can be used to develop high-voltage sensorless motor drivers. When a sensorless algorithm is used to control the BLDC motor speed, the Back EMF (BEMF) signals are used. Based on zero crossing of BEMF signals, motor commutation is decided in the firmware. The signal conditioning circuit […]
Development board for Brushless Motor, DC Brushed Motor, AC Motors (Pre-Driver)
https://www.electronics-lab.com/project/development-board-for-brushless-motor-dc-brushed-motor-ac-motors-pre-driver/
The project described here is a pre-driver for brushless motors with a hall sensor. The board incorporates many features like current monitor, fault, speed control, direction control motor start/stop using tactile switches, various function LEDs, 6 PWM LEDs. By combining it with a hybrid IC or IPM module large size high voltage and high current […]
600V – 30A IPM Module Carrier Board for Variable Frequency Drive (VFD)
https://www.electronics-lab.com/project/600v-30a-ipm-module-carrier-board-for-variable-frequency-drive-vfd/
This compact IPM module circuit provides a fully-featured, high-performance inverter output stage for AC Induction, BLDC, and PMSM motors. The circuit is based on FNA23060 chip which integrates the optimized gate drive of the built-in IGBTs to minimize EMI and losses, while also providing multiple on-module protection features: under-voltage lockouts, over-current shutdown, temperature sensing, and […]