Push-Pull Voltage Mode PWM Controller

---

https://www.electronics-lab.com/project/push-pull-voltage-mode-pwm-controller/

This project is a simple, low-voltage push-pull PWM controller using the TI LM5032 chip and two MOSFETs. It's suitable for applications like DC-DC converters or Tesla Coil drivers. Frequency, current sensing, and soft start are configured via external components.

Isolated Power Supply with 24V Input and Dual 15V Output

---

https://www.electronics-lab.com/project/isolated-power-supply-with-24v-input-and-dual-15v-output/

This isolated power supply features the SN6507 chip, a push-pull isolation transformer driver, which provides a reliable and efficient power conversion solution. The power supply comprises a transformer, rectifier circuit, and isolation transformer T1, which separates the input and isolated output, ensuring electrical isolation and preventing high voltages and noise from interfering with or damaging […]

Self-Oscillating Half Bridge Module

---

https://www.electronics-lab.com/project/self-oscillating-half-bridge-module/

This is an automotive-grade self-oscillation 50% duty cycle half-bridge module built using the AUIR2085S chip from Infineon. The project consists of 2 x N-channel MOSFETs, and the module provides a primary side control solution to enable Half-Bridge DC-bus converters. The module is a self-oscillating half-bridge driver with 50% duty cycle ideally suited for 10V – […]