OSHChip – general purpose processor board in DIP format
https://www.electronics-lab.com/oshchip-general-purpose-processor-board/
OSHChip is a general purpose processor board based on ARM Cortex-M0 32 bit processor running at 16 MHz. It includes 2.4 GHz Bluetooth Low Energy radio and a broad range of built-in Peripherals. It features 256 KBytes of Flash memory for program and data and 32 KBytes of SRAM. All this functionality comes in a […]
Fobble – A general purpose Wireless Breakout Board!
https://www.electronics-lab.com/fobble-a-general-purpose-wireless-breakout-board/
Ken Boak has designed a compact board with RFduino Bluetooth Low Energy Module: This week I have been working on another of my standard footprint 50mm x 50mm boards – it is a general purpose wireless module carrier board:- Fobble. That’s a BLE Fob – for anyone who misses the pun. In the last few […]
Smart Watch
https://www.electronics-lab.com/smart-watch/
Matthew Filipek from Cornell Univercity has build a nice smart watch with 1.7 inch touch screen, SD card, Bluetooth module and various apps. One of the main inspirations for this project was Jared Sanson’s implementation of a DIY smartwatch (REF 0). With several design iterations, he was able to produce a watch in a very […]
PIC32 Bluetooth Starter Kit; DM320018
https://www.electronics-lab.com/pic32-bluetooth-starter-kit-dm320018/
The DM320018 PIC32 bluetooth starter kit comes with demonstration code that allows it to communicate with smart devices that are bluetooth enabled. It features the PIC32MX270F256D MCU for central processing and the FLC-BTM805 dual-mode Bluetooth HCI module. The kit also contains Cree high output multi-color LED, three standard single color LEDs for display, five push […]
Mobilinkd – Highly mobile packet radio
https://www.electronics-lab.com/mobilinkd-highly-mobile-packet-radio/
If you enjoy APRS (the Automatic Packet Reporting System) in US and Canada this device will make your life easier. All you need is the tiny board, your radio and an Android phone. Introducing the Mobilinkd Bluetooth APRS® TNC. With your radio, your Android phone and this TNC, you have everything you need to get […]
Bluetooth enabled Door locker using Arduino
https://www.electronics-lab.com/bluetooth-enabled-door-locker-using-arduino/
Frank Donald @ gadgetronicx.com has build a bluetooth controlled door locker using Arduino. Source code included: DIY Arduino based lockers can be found plenty in the internet where keypad was used to feed lock input. But this Bluetooth enabled Door locker uses Bluetooth as a medium to connect with the locker and your smart phone to […]
Intel and Banzi presented Arduino 101 and Genuino 101
https://www.electronics-lab.com/intel-and-banzi-presented-arduino-101-and-genuino-101/
by Zoe Romano @ blog.arduino.cc: Today during Opening Conference at Maker Faire Rome, Josh Walden Senior Vice President of Intel Corporation and Massimo Banzi, co-founder of Arduino, announced the upcoming release of Arduino 101 (U.S.) and Genuino 101 (outside the U.S.). The board features a 32-bit Intel® Quark™ microcontroller for minimal power consumption, 384 kB of […]
Digital Hearing Aid using MKL02Z16VFG4
https://www.electronics-lab.com/digital-hearing-aid-using-mkl02z16vfg4/
A hearing aid is a small electronic device worn in or behind the ear that amplifies incoming sounds to help people with hearing impairment. This design features a light and compact hearing aid with a soft touch sensor that allows the user to control the volume and frequency depending on the user’s preference. This design […]
Tutorial on the Design & Implementation of an FPGA RGB LED Matrix Driver
https://www.electronics-lab.com/tutorial-on-the-design-implementation-of-an-fpga-rgb-led-matrix-driver/
In this episode Shahriar and Timo demonstrate the design methodology of an FPGA based 32×32 RGB LED matrix driver. Timo has kindly devoted some of his time to describe the block diagram and the thought process which goes into designing this type of FPGA display driver. The various components of the overall system (PLL, UART, […]
DIY Weather Station with Bluetooth
https://www.electronics-lab.com/diy-weather-station-with-bluetooth/
by Matej Blagšič @ instructables.com: Recently I attended a course in our University of Electrical Engineering and we were making ourselves a small weather station. It included learning about soldering, sensors and arduino. It was super fun making it with little kids and other high school kids my age. I will show you how you can […]