Piunora Carrier Board For Raspberry Pi Compute Module 4
https://www.electronics-lab.com/piunora-carrier-board-for-raspberry-pi-compute-module-4/
Piunora carrier board for Raspberry Pi CM4 is designed for rapid electronics prototyping in a Linux environment. The official carrier board of the Raspberry Pi CM4 is large as it covers all features required. Whereas, the Piunora carrier board comes with similar functionalities but with a smaller form factor similar to Arduino Uno or Adafruit […]
FeatherS2 – ESP32-S2 based development board in Adafruit Feather form factor
https://www.electronics-lab.com/feathers2-esp32-s2-based-development-board-in-adafruit-feather-form-factor/
So far, there have been quite a number of development boards following Adafruit Feather format with products, like the QuickFeather Cortex-M4 + FPGA board and nRF9160 Feather providing LTE IoT & GPS connectivity. Added to the list now is the new FeatherS2 that is based on Espressif’s ESP32-S2 microcontroller SoC. As a quick reminder, the ESP32-S2 […]
Evo M51 Compute module Features Atmel SAMD51 MCU with Intel MAX 10 FPGA
https://www.electronics-lab.com/evo-m51-compute-module-features-atmel-samd51-mcu-intel-max-10-fpga/
Alorium technology has unveiled its new Arduino compatible FPGA board called the Evo M51. We have seen other Arduino FPGA boards like the Arduino Zero, but the Evo M51 is a smaller Arduino compatible FPGA board. About the board, the company says: “Evo M51 is the next step in the evolution of our FPGA-enhanced embedded […]
Tiny FIDI board for super-fast prototyping with CircuitPython
https://www.electronics-lab.com/tiny-fidi-board-super-fast-prototyping-circuitpython/
As Adafruit’s CircuitPython becomes increasingly popular as one of the basics for rapid microcontroller-based prototyping and development, several development boards are beginning to show up on the makers’ space to help fast track project prototype and production. One of such is the recent open-source CircuitPython development board by Omzlo called FIDI. “FIDI is a small […]
CircuitBrains Deluxe is a Tiny, CircuitPython-compatible Module
https://www.electronics-lab.com/circuitbrains-deluxe-tiny-circuitpython-compatible-module/
CircuitPython is a branch of MicroPhython designed to simplify education and experimentation on low-cost microcontrollers to make it easy to prototype without any upfront desktop software downloads. With CircuitPython, you can write clean and simple Python code to control your hardware instead of using complex low-level languages like C or C ++. While we have […]
CircuitBrains boards, castellated modules coming soon …
https://www.electronics-lab.com/circuitbrains-boards-castellated-modules-coming-soon/
Kevin’s CircuitBrains boards are now listed and live on circuitpython.org/downloads. Kevin submitted the Deluxe model to Crowd Supply will have a project to support fabrication and fulfillment soon – Twitter. [via] CircuitBrains Basic CircuitPython on an ARM Cortex M0 in 1 square inch! This “Just Add Solder” castellated module is perfect for incorporating into your […]
Serpentine – Tiny CircuitPython-Based Development Board
https://www.electronics-lab.com/serpentine-tiny-circuitpython-based-development-board/
CircuitPython’s user base is growing even though a lot of people believe Micropython is a better route. It enjoys the rigorous backing 0f one of the major drivers of the Maker community (Aka Adafruit) and recently has been the “embedded Python” stack of choice for several open-source development boards. One such board is the Serpentine […]
Meet the Latest Circuitpython based Board: CircuitBrains Deluxe
https://www.electronics-lab.com/meet-latest-circuitpython-based-board-circuitbrains-deluxe/
As you would expect from a stack backed by giants like Adafruit, CircuitPython is overthrowing Micropython and fast becoming one of the most popular stacks for embedded development amongst makers. As a result of this popularity, quite a number of CircuitPython optimized boards are springing up and one of the latest ones is CircuitBrains which […]
SAMD21 MINI / Wemos D1 SAMD21 M0 Mini Development Board
https://www.electronics-lab.com/samd21-mini-wemos-d1-samd21-m0-mini-development-board/
Microchip / Atmel SAMD21 Arm Cortex-M0+ microcontroller has been around for several years and we have wrote for many boards using this microcontroller including the SAMD21 Lora Board and Minimal ATSAMD21 Board. Now, another SAMD21 development board has been shown up on Electrodragon website: the SAMD21 Mini Development Board which is sold for $14.50 on […]
Programmable USB Hub has I2C, GPIO and SPI
https://www.electronics-lab.com/programmable-usb-hub-i2c-gpio-spi/
A USB hub that’s also a dev board and an I2C, GPIO, and SPI bridge In addition to being a 4-port USB 2 High-Speed hub, this Programmable USB hub is also: A CircuitPython based development board. A bridge between your computer and I2C (via Sparkfun Qwiic connectors), GPIO, and SPI (via its mikroBUS header). A […]