SB Components StackyFi A ESP32-S3 Board in Raspberry Pi Zero From Factor
https://www.electronics-lab.com/sb-components-stackyfi-a-esp32-s3-board-in-raspberry-pi-zero-from-factor/
SB Components StackyFi is an ESP32-S3 powered development board in a Raspberry Pi Zero Form Factor. The board features a 40-pin GPIO header which is compatible with most Raspberry Pi HAT. The board also has dual USB-C ports (one native, one for serial debugging), an IMU sensor, an RGB LED, and Boot/Reset buttons. The board […]
Pico Display Base Board – A Versatile Platform for Raspberry Pi Pico based LCD Projects
https://www.electronics-lab.com/pico-display-base-board-a-versatile-platform-for-raspberry-pi-pico-based-lcd-projects/
The Pico Display Base Board is a compact PCB board designed to simplify the creation of projects using a Raspberry Pi Pico and an LCD screen. The board includes onboard components like buttons and LEDs, as well as ports for additional modules like an RTC module, OLED display, or Infrared receiver. It’s particularly well-suited for […]
Luckfox Pico Ultra is a Rockchip RV1106-based Linux board
https://www.electronics-lab.com/luckfox-pico-ultra/
Luckfox Pico Ultra is a Rockchip RV1106-based micro Linux dev board with 0.5 Tops NPU to run AI that can be configured to run AI tasks. The board also features a MIPI CSI port, an Ethernet port GPIO, UART, RGB LED header, SPI, I2C, USB, a speaker interface, and much more. Waveshare also offers two […]
Banana Pi BPI-Centi-S3 is A ESP32-S3 Powered Dev Board with 1.9-inch TFT Display
https://www.electronics-lab.com/banana-pi-bpi-centi-s3-is-a-esp32-s3-powered-dev-board-with-1-9-inch-tft-display/
Banana Pi BPI-Centi-S3 is an ESP-32 S3-powered dev board with a 1.9-inch color TFT display, a rotary encoder, and a WS2812B NeoPixcel LED. GPIO and much more. These features make this board similar to the LILYGO T-Panel, LILYGO T4 S3, T-Display-S3-Long, and other display products that we have covered in our previous posts. The board […]
ThingPulse Pendrive S3 – A ESP32-S3 Pendrive with RGB LED, Wireless Storage and Much More
https://www.electronics-lab.com/thingpulse-pendrive-s3-a-esp32-s3-pendrive-with-rgb-led-wireless-storage-and-much-more/
Though it’s called a Pendrive, the ThingPulse Pendrive S3 is not your average drive it’s a versatile device that can transform into various USB gadgets, like a memory stick, keyboard, mouse, or even a networking tool. But its most intriguing use? It can be a “BadUSB” with the SuperWifiDuck software, and at this point, we all […]
RPGA Feather is an RP2040 and iCE40 FPGA Powered Dev Board in A Adafruit Feather From Factor
https://www.electronics-lab.com/rpga-feather-is-an-rp2040-and-ice40-fpga-powered-dev-board-in-a-adafruit-feather-from-factor/
RPGA Feather by Oak Development Technologies is an RP2040 and iCE40FPGA-powered development board in an Adafruit Feather form factor. The board is tiny and features an MCP73831 1S LiPo charger, a USB 2.0 Type-C connector for power and programming, and an RGB LED driven by the FPGA Speaking of the FPGA it’s an ultra-low-power iCE40 […]
Conexio Stratus Pro- nRF9161 Powered Dev Kit with LTE-IoT, DECT NR+, GNSS and Much More
https://www.electronics-lab.com/conexio-stratus-pro-nrf9161-powered-dev-kit-with-lte-iot-dect-nr-gnss-and-much-more/
Conexio Technologies, Inc. has recently introduced Conexio Stratus Pro, a battery-powered development board built around Nordic Semiconductor’s nRF9161 cellular modem. The unique aspect of this board is that it has support for LTE-M, NB-IoT, and GPS connectivity and to make things even more interesting it has also support for DECT NR+, and GNSS making it […]
Stefano Viola’s NiCE5340 SoM Features nRF5340 SoC and iCE40 FPGA in a compact From Factor
https://www.electronics-lab.com/stefano-violas-nice5340-som-features-nrf5340-soc-and-ice40-fpga-in-a-compact-from-factor/
Engineer and developer Stefano Viola has designed a System on Module (SoM) that features an nRF5340 Bluetooth SoC and an iCE40 FPGA in a compact 16×29 mm form factor. To make things more interesting Viola has embedded 11 sensors along with an nPM1100 battery monitor into that compact PCB, but Viola does not mention how […]
NanoCell V2.1 is A ESP32-C3 IoT dev board for Home Assistant
https://www.electronics-lab.com/nanocell-v2-1-is-a-esp32-c3-iot-dev-board-for-home-assistant/
The NanoCell V2.1 is an ESP32-C3 powred dev board designed by Frapais’ lab in Greece. The board comes preloaded with ESPHome and features a battery management IC for battery-based low-power applications. The board has A buck-boost converter that has been developed to minimize standby current consumption to 66uA, with the exclusion of the current drawn […]
CWWK X86 P5 – A Compact Alder Lake N-Powered Development Board with 4 M.2 NVMe Expansion Support
https://www.electronics-lab.com/cwwk-x86-p5-a-compact-alder-lake-n-powered-development-board-with-4-m-2-nvme-expansion-support/
The CWWK X86 P5 is a versatile mini PC and development board powered by the 12th Gen AlderLake-N Series of SoCs. It is available in three variants featuring the N100 (quad-core), N200 (quad-core), or Core i3-N305 (octa-core) processors. Equipped with dual 2.5GbE ports using Intel i226V controller, HDMI 2.0 ports, two USB 3.2 ports, and up […]