LILYGO’s T-TWR REV2.1 – An ESP32-Based Walkie Talkie Development Board with GPS Functionality
https://www.electronics-lab.com/lilygos-t-twr-rev2-1-an-esp32-based-walkie-talkie-development-board-with-gps-functionality/
LILYGO’s T-TWR REV2.1 can be considered an ESP32-S3-based development board with built-in Walkie-Talkie features. Because the board is built around an EPS32-S3 it already has Wi-Fi and Bluetooth capabilities. With the addition of another GPS module, this becomes very useful for developing portable communication devices, asset-tracking solutions, and other outdoor applications that require location awareness. […]
Boardcom RK3576 Powered SoM and Development Board Supports 12 Analog Camera Inputs
https://www.electronics-lab.com/boardcom-rk3576-powered-som-and-development-board-supports-12-analog-camera-inputs/
Boardcom has recently introduced CM3576 SoM and EM3576 its associated development board, together with a development kit. The unique thing about this kit is that it supports 12 analog camera inputs along with various interfaces like HDMI, GbE Ethernet, USB, Serial GPIO, and much more. Previously we have covered many SoM and development boards powered […]
Microchip dsPIC33A Series Features High-Performance Digital Signal Controller with Double Precision FPU and Analog Intrerface
https://www.electronics-lab.com/microchip-dspic33a-series-features-high-performance-digital-signal-controller-with-double-precision-fpu-and-analog-intrerface/
Microchip Technology has released a new family of Digital Signal Controllers (DSCs) called dsPIC33A. These controllers are designed for time-constrained systems that need fast and precise control. The DSCs are built with a 32-bit architecture with a double-precision floating-point unit (DP FPU) and a DSP engine for quickly handling math and data. The dsPIC33A DSCs […]
SB Components StackyFi A ESP32-S3 Board in Raspberry Pi Zero From Factor
https://www.electronics-lab.com/sb-components-stackyfi-a-esp32-s3-board-in-raspberry-pi-zero-from-factor/
SB Components StackyFi is an ESP32-S3 powered development board in a Raspberry Pi Zero Form Factor. The board features a 40-pin GPIO header which is compatible with most Raspberry Pi HAT. The board also has dual USB-C ports (one native, one for serial debugging), an IMU sensor, an RGB LED, and Boot/Reset buttons. The board […]
Pico Display Base Board – A Versatile Platform for Raspberry Pi Pico based LCD Projects
https://www.electronics-lab.com/pico-display-base-board-a-versatile-platform-for-raspberry-pi-pico-based-lcd-projects/
The Pico Display Base Board is a compact PCB board designed to simplify the creation of projects using a Raspberry Pi Pico and an LCD screen. The board includes onboard components like buttons and LEDs, as well as ports for additional modules like an RTC module, OLED display, or Infrared receiver. It’s particularly well-suited for […]
Luckfox Pico Ultra is a Rockchip RV1106-based Linux board
https://www.electronics-lab.com/luckfox-pico-ultra/
Luckfox Pico Ultra is a Rockchip RV1106-based micro Linux dev board with 0.5 Tops NPU to run AI that can be configured to run AI tasks. The board also features a MIPI CSI port, an Ethernet port GPIO, UART, RGB LED header, SPI, I2C, USB, a speaker interface, and much more. Waveshare also offers two […]
Banana Pi BPI-Centi-S3 is A ESP32-S3 Powered Dev Board with 1.9-inch TFT Display
https://www.electronics-lab.com/banana-pi-bpi-centi-s3-is-a-esp32-s3-powered-dev-board-with-1-9-inch-tft-display/
Banana Pi BPI-Centi-S3 is an ESP-32 S3-powered dev board with a 1.9-inch color TFT display, a rotary encoder, and a WS2812B NeoPixcel LED. GPIO and much more. These features make this board similar to the LILYGO T-Panel, LILYGO T4 S3, T-Display-S3-Long, and other display products that we have covered in our previous posts. The board […]
ThingPulse Pendrive S3 – A ESP32-S3 Pendrive with RGB LED, Wireless Storage and Much More
https://www.electronics-lab.com/thingpulse-pendrive-s3-a-esp32-s3-pendrive-with-rgb-led-wireless-storage-and-much-more/
Though it’s called a Pendrive, the ThingPulse Pendrive S3 is not your average drive it’s a versatile device that can transform into various USB gadgets, like a memory stick, keyboard, mouse, or even a networking tool. But its most intriguing use? It can be a “BadUSB” with the SuperWifiDuck software, and at this point, we all […]
RPGA Feather is an RP2040 and iCE40 FPGA Powered Dev Board in A Adafruit Feather From Factor
https://www.electronics-lab.com/rpga-feather-is-an-rp2040-and-ice40-fpga-powered-dev-board-in-a-adafruit-feather-from-factor/
RPGA Feather by Oak Development Technologies is an RP2040 and iCE40FPGA-powered development board in an Adafruit Feather form factor. The board is tiny and features an MCP73831 1S LiPo charger, a USB 2.0 Type-C connector for power and programming, and an RGB LED driven by the FPGA Speaking of the FPGA it’s an ultra-low-power iCE40 […]
Conexio Stratus Pro- nRF9161 Powered Dev Kit with LTE-IoT, DECT NR+, GNSS and Much More
https://www.electronics-lab.com/conexio-stratus-pro-nrf9161-powered-dev-kit-with-lte-iot-dect-nr-gnss-and-much-more/
Conexio Technologies, Inc. has recently introduced Conexio Stratus Pro, a battery-powered development board built around Nordic Semiconductor’s nRF9161 cellular modem. The unique aspect of this board is that it has support for LTE-M, NB-IoT, and GPS connectivity and to make things even more interesting it has also support for DECT NR+, and GNSS making it […]