LILYGO T-Watch S3 Plus ESP32-based smartwatch upgrades with GPS and 940mAh battery
https://www.electronics-lab.com/lilygo-t-watch-s3-plus-esp32-based-smartwatch-upgrades-with-gps-and-940mah-battery/
LILYGO has recently introduced an upgraded version of their T-Watch S3 ESP32-based smartwatch, the T-Watch S3 Plus. This new smartwatch not only features Wi-Fi and Bluetooth LE but also has a MIA-M10Q GPS module for added functionality. While maintaining the open-source flexibility of its predecessor (T-Watch S3), this new model adds a larger 940mAh lithium […]
Makerfabs MaTouch 1.28-inch ToolSet AC Dimmer: ESP32-S3-Based Phase-Cut Dimming Controller with BT139 TRIAC
https://www.electronics-lab.com/makerfabs-matouch-1-28-inch-toolset-ac-dimmer-esp32-s3-based-phase-cut-dimming-controller-with-bt139-triac/
Makerfabs has introduced the MaTouch 1.28-inch ToolSet AC Dimmer, an open-source AC voltage controller based on the ESP32-S3. It is designed to dim lights and control motor speeds using phase-cut dimming. The device features an ESP32-S3 wireless MCU with 16MB flash and 8MB PSRAM, along with a 1.28-inch 240 x 240 capacitive touch display. The […]
BlackIoT Polverine: ESP32-S3, BMV080, and BME690-Based Environmental Sensing Board for Real-Time Air Quality Monitoring
https://www.electronics-lab.com/blackiot-polverine-esp32-s3-bmv080-and-bme690-based-environmental-sensing-board-for-real-time-air-quality-monitoring/
BlackIoT Polverine is a mikroBUS-compatible environmental sensing board designed for real-time air quality monitoring. It features the ESP32-S3-MINI-1 MCU, Bosch Sensortec’s BMV080 PM2.5 sensor, and BME690 gas sensor. The board supports Wi-Fi (802.11 b/g/n) and Bluetooth 5 connectivity and is available through the Crowd Supply crowdfunding platform. The ESP32-S3-MINI-1, powered by an Xtensa 32-bit LX7 […]
Sensy32 All-in-One ESP32-S3 Based IoT Board with Built-in LCD and Multiple Sensors Supports Wi-Fi, Bluetooth, and Cloud Integration
https://www.electronics-lab.com/sensy32-all-in-one-esp32-s3-based-iot-board-with-built-in-lcd-and-multiple-sensors-supports-wi-fi-bluetooth-and-cloud-integration/
The Sensy32 All-in-One Sensor IoT Board is a flexible and advanced development platform designed for sensor enthusiasts, developers, and IoT creators. It is powered by the ESP32-S3 microcontroller, it integrates a wide range of sensors, including UV light, IR motion, humidity, temperature, altitude, pressure, 9-DOF IMU, light intensity, and a MEMS microphone. Sensy32 has an […]
M5PaperS3: 4.7-inch Touch E-Ink Display with 16-level Grayscale, GT911 Capacitive Touch, and Gyroscope Sensor
https://www.electronics-lab.com/m5papers3-4-7-inch-touch-e-ink-display-with-16-level-grayscale-gt911-capacitive-touch-and-gyroscope-sensor/
The PaperS3 is an ESP32-S3 Development Kit designed as a low-power e-ink display controller. Powered by the ESP32-S3R8 SoC, it features a 4.7-inch e-ink display with a 960×540 resolution and 16-level grayscale. The display integrates a GT911 capacitive touch panel, enabling dual-point touch and gesture-based interactions. Additional features include a gyroscope sensor, onboard buzzer, and […]
ESP32-S3 1.91-inch AMOLED Board with ESP32-S3R8, RM67162 Driver, and FT3168 Touch Controller
https://www.electronics-lab.com/esp32-s3-1-91-inch-amoled-board-with-esp32-s3r8-rm67162-driver-and-ft3168-touch-controller/
The ESP32-S3 1.91-inch AMOLED development board is designed for rapid prototyping of IoT and portable applications. Powered by the ESP32-S3R8 chip with a 240 MHz dual-core processor, it supports 2.4 GHz Wi-Fi and Bluetooth BLE 5, 16 MB Flash, and 8 MB PSRAM. Its capabilities are further enhanced by a 6-axis motion sensor, making it […]
OMGS3 is a Compact yet Fully Functional ESP32-S3 Module
https://www.electronics-lab.com/omgs3-is-a-compact-yet-fully-functional-esp32-s3-module/
The OMGS3 is a compact, fully-featured ESP32-S3-PICO board from the Unexpected Maker. With its dual-core architecture and QSPI memory, it can effortlessly handle more than one task at a time. It has wireless connectivity supporting Wifi, Bluetooth, and an Onboard High Gain Antenna. The Architecture of the OMGS3 Board The Xtensa LX7 Core is designed […]
Waveshare ESP32-S3-AMOLED-1.91-M is an ESP32-S3 based dev board with 1.91″ display Accelerometer Gyroscope and more
https://www.electronics-lab.com/waveshare-esp32-s3-amoled-1-91-m-is-an-esp32-s3-based-dev-board-with-1-91-display-accelerometer-gyroscope-and-more/
Waveshare has recently launched the ESP32-S3-AMOLED-1.91-M dev board which is an ESP32-S3-based board with a 1.91″ AMOLED display, designed for rapid prototyping and IoT or portable projects Powered by the ESP32-S3R8 chip, it includes a 32-bit LX7 dual-core processor (up to 240MHz), 2.4GHz Wi-Fi, Bluetooth BLE 5, 16MB Flash, 8MB PSRAM, and additional SRAM/ROM memory. […]
Lilygo’s T-Embed: A Compact IoT Embedded Panel with ESP32-S3, RGB Ring Light, and TFT Display
https://www.electronics-lab.com/lilygos-t-embed-a-compact-iot-embedded-panel-with-esp32-s3-rgb-ring-light-and-tft-display/
Lilygo has recently launched the T-Embed, an IoT-embedded panel designed for programmable development, featuring a compact design with ABS and PC material. The ESP32-S3 MCU powers it and supports Wi-Fi and Bluetooth 5, including Bluetooth mesh. The panel includes a 1.9-inch IPS color TFT LCD (ST7789 model) with 170×320 resolution, offering clear visual output at […]
Lilygo T-Embed CC1101 Sub-GHz Transceiver Module with ESP32-S3 and TFT Display
https://www.electronics-lab.com/lilygo-t-embed-cc1101-sub-ghz-transceiver-module-with-esp32-s3-and-tft-display/
Lilygo has recently launched the T-Embed CC1101, a transceiver module that integrates an ESP32-S3 dual-core LX7 microprocessor and a built-in Sub-GHz module based on the CC1101 chip, designed for communication in the 300-348 MHz, 387-464 MHz, and 779-928 MHz frequency bands. It features a 16MB flash memory, 8MB RSRAM, and supports wireless communication via Wi-Fi […]