Turn Your Raspberry Pi Into a Standalone AVR/ESP Programmer with LEMPA
Raspberry Pi

Turn Your Raspberry Pi Into a Standalone AVR/ESP Programmer with LEMPA

One of the challenges of developing and producing microcontroller-based hardware projects in a repeatable, small/medium volume, is the amount of work it takes to flash the MCUs with the required firmware. Another side of the problem for designers who work with diverse types of...

Continue Reading
1172
Views
0 Comments
Adafruit BrainCraft HAT – Machine Learning for Raspberry Pi 4
Raspberry Pi

Adafruit BrainCraft HAT – Machine Learning for Raspberry Pi 4

Think about what would be useful when developing your machine learning projects for the Raspberry Pi, maybe a camera, a display, some input and output sound capabilities or even an easy means to easily inject the results of your algorithms into servo motors or other devices. Look no...

Continue Reading
1138
Views
0 Comments
Monarch Go Pi Hat features LTE Cat-M1 modem
Raspberry Pi

Monarch Go Pi Hat features LTE Cat-M1 modem

The Monarch Go Pi HAT enables engineers to connect Raspberry Pi HAT-capable SBCs to the Monarch Go LTE Cat-M1 modem. The Monarch Go Pi HAT supports both the Monarch Go and Monarch Go-GPS modems. In addition to Monarch Go support, the Pi HAT includes a shuttle click expansion connector...

Continue Reading
986
Views
0 Comments
Avnet’s Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi
Raspberry Pi

Avnet’s Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi

Sensor HAT based on Renesas ZMOD4410 module accelerates design of products requiring indoor air quality measurement capabilities Avnet's Renesas ZMOD4410 Indoor Air Quality HAT for Raspberry Pi is an evaluation, development and quick-prototyping tool intended for professionals...

Continue Reading
1185
Views
0 Comments
World’s first fully self-contained Raspberry Pi audio HAT board with MERUS™ class D multilevel amplifier
Raspberry Pi

World’s first fully self-contained Raspberry Pi audio HAT board with MERUS™ class D multilevel amplifier

Infineon Technologies AG developed the world’s first fully self-contained Raspberry Pi audio amplifier HAT (Hardware attached on Top) board. It offers high definition audio at boom box power levels in a small form factor. The Infineon proprietary multilevel technology ensures minimum...

Continue Reading
1401
Views
0 Comments
Robo HAT MM1 – An open source robotics and automation controller for Raspberry Pi
Raspberry PiRobots

Robo HAT MM1 – An open source robotics and automation controller for Raspberry Pi

The Robotics Masters Robo HAT MM1 is an open source robotics controller board for Raspberry Pi. It removes the initial barriers to starting any robotics project by providing all the hardware you need in one easy form factor. The wide compatibility with many open source software...

Continue Reading
2098
Views
0 Comments
ApplePi DAC Audio HAT Add-on For The Raspberry Pi Features 24-bit DAC And A 128dB SNR
AudioRaspberry Pi

ApplePi DAC Audio HAT Add-on For The Raspberry Pi Features 24-bit DAC And A 128dB SNR

Orchard Audio quickly exceeded its $5K Kickstarter goal for its ApplePi DAC HAT board, which it is promoted as “the most advanced and highest performance sound card hat for the Raspberry Pi.” You can order the add-on board from May 13 starting at $175. Options include a $5...

Continue Reading
4503
Views
0 Comments
PMOD HAT Adapter Expansion for the Raspberry Pi
Raspberry Pi

PMOD HAT Adapter Expansion for the Raspberry Pi

In the ever-increasing uses cases for the Raspberry Pi, one major way to add an extra functionality to the Raspberry Pi is making use of Pmod Modules. Pmod devices or modules are trademarks of Digilent Inc. They are set of small input and output interface boards that can be used to extend...

Continue Reading
3006
Views
0 Comments
Archives