SupTronics X1208 Raspberry Pi 5 HAT with UPS and NVMe
https://www.electronics-lab.com/suptronics-x1208-raspberry-pi-5-hat-with-ups-and-nvme/
X1208 HAT integrates UPS backup, 5V/5A power, and M.2 NVMe storage, enabling reliable Raspberry Pi 5 operation for NAS, edge computing, and always-on systems.
Waveshare L76K GPS HAT Adds Multi-GNSS Positioning to Raspberry Pi
https://www.electronics-lab.com/waveshare-l76k-gps-hat-adds-multi-gnss-positioning-to-raspberry-pi/
The Raspberry Pi GPS HAT supports GPS, BeiDou, GLONASS, and QZSS with A-GNSS, SAW filtering, UART/USB/I²C connectivity, onboard battery, and update rates up to 5 Hz for reliable tracking.
Waveshare PCIe HAT+ Adds NVMe, Dual 2.5GbE, USB 3.2 to Raspberry Pi 5
https://www.electronics-lab.com/waveshare-pcie-hat-adds-nvme-dual-2-5gbe-usb-3-2-to-raspberry-pi-5/
Waveshare has recently released the PCIe TO M.2 USB ETH HAT+, an all-in-one expansion board with PCIe to USB 3.2 Gen1, 2.5G Ethernet, and M.2 NVMe HAT+ support. It uses the Pi 5’s PCIe interface to deliver high-speed I/O and storage in a compact HAT+ form factor.
Radxa Dual 2.5G Router HAT Brings 2x 2.5GbE Ports and M.2 NVMe to Raspberry Pi and ROCK SBCs
https://www.electronics-lab.com/radxa-dual-2-5g-router-hat-brings-2x-2-5gbe-ports-and-m-2-nvme-to-raspberry-pi-and-rock-sbcs/
Radxa recently introduced the Dual 2.5G Router HAT, a high-performance network and storage expansion board designed for Radxa single-board computers (SBCs) and the Raspberry Pi 5. It boosts device capabilities by adding two 2.5GbE Ethernet ports via RTL8125BG controllers, an M.2 M Key slot for NVMe SSDs, and a PCIe FPC connector for further expansion. […]
Waveshare PoE HAT (H) for Raspberry Pi 5 with Onboard PoE Controller IC and Isolated SMPS
https://www.electronics-lab.com/waveshare-poe-hat-h-for-raspberry-pi-5-with-onboard-poe-controller-ic-and-isolated-smps/
The PoE HAT (H) is a compact power over Ethernet solution for the Raspberry Pi 5 and Compute Module 5, which is fully compliant with the IEEE 802.3af/at standards. When connected to a PoE-enabled switch or router, it enables both power and network connectivity through a single Ethernet cable, eliminating the need for a separate […]
Radxa Dual 2.5G Router HAT Adds High-Speed Networking and NVMe Storage to Raspberry Pi 5 and ROCK SBCs
https://www.electronics-lab.com/radxa-dual-2-5g-router-hat-adds-high-speed-networking-and-nvme-storage-to-raspberry-pi-5-and-rock-sbcs/
The Radxa Dual 2.5G Router HAT is an expansion board targeted at Radxa ROCK SBCs and the Raspberry Pi 5. It provides two 2.5GbE Ethernet ports driven by the Realtek RTL8125B controller, which supports high-speed networking. To support storage expansion, it has an M.2 M-Key interface with a PCIe Gen3 x1 interface that supports NVMe […]
HiFi-Amped Raspberry Pi Audio HAT Features Dual PCM5100 DACs,GPIO-Controlled Shutdown and TPA3110 Amplifiers
https://www.electronics-lab.com/hifi-amped-raspberry-pi-audio-hat-features-dual-pcm5100-dacsgpio-controlled-shutdown-and-tpa3110-amplifiers/
The HiFi-Amped Raspberry Pi Audio HAT is an Audio HAT with dual PCM5100A 32-bit DACs and TPA3110 class-D amplifiers, GPIO control shutdown, and more. It delivers high-quality audio output with power options ranging from 4x 10W into 8 ohms at 13V to 2x 30W into 4 ohms in bridged mode at 16V, making it suitable […]
Raspberry Pi AI HAT+ Brings Up to 26 TOPS with Hailo-8 and Hailo-8L Accelerators
https://www.electronics-lab.com/raspberry-pi-ai-hat-brings-up-to-26-tops-with-hailo-8-and-hailo-8l-accelerators/
Raspberry Pi has recently launched Raspberry Pi AI HAT+ a powerful new accessory designed to boost the AI capabilities of the Raspberry Pi. The HAT delivers up to 26 TOPS of processing power and comes in two variants a 13 TOPS version using the Hailo-8L accelerator and a 26 TOPS version with the Hailo-8 accelerator. […]
Waveshare UPS HAT (E) Holds Four 21700 Lithium batteries and it’s Compatible with Pi 5/4/3B+
https://www.electronics-lab.com/waveshare-ups-hat-e-holds-four-21700-lithium-batteries-and-its-compatible-with-pi-5-4-3b/
Waveshare has recently announced UPS HAT (E), which can be used to provide backup power for Raspberry Pi 5/4B/3B+ in case of a power outage. The HAT supports four 21700 Lithium batteries and includes a battery fuel gauge IC for monitoring battery power. The board also has a USB-C port that can charge the battery […]
Add four USB 3.2 ports to your Raspberry Pi 5 with the Waveshare PCIe to USB HAT+
https://www.electronics-lab.com/add-four-usb-3-2-ports-to-your-raspberry-pi-5-with-the-waveshare-pcie-to-usb-hat/
The Waveshare PCIe to USB HAT+ is designed to extend the capabilities of the Raspberry Pi 5 or the Rockchip Rock Pi boards by adding four more USB 3.2 high-speed USB ports. The module will also feature real-time power status monitoring and allow USB power management through software. Additionally, the board has an EEPROM to […]