Quad-core networking “Mochabin-5G” launches on Kickstarter for $159 and up; Features support for 5G cellular, 10-gig-Ethernet and Wi-Fi 6
https://www.electronics-lab.com/quad-core-networking-mochabin-5g-launches-on-kickstarter-for-159-and-up-features-support-for-5g-cellular-10-gig-ethernet-and-wi-fi-6/
Embedded computing specialist Globalscale Technologies has announced a powerful Mochabin SBC which runs Linux on a 1.4GHz quad -A72 Marvell 7040 processor and offers more Ethernet ports compared to the earlier boards. “The Mochabin builds upon the ESPRESSObin community and experience by adding a fanless quad core Arm A72 processor clocked at 1.4GHz,” says Bryan […]
Selpic S1+ The Handheld, Any-Surface Quick Printing Solution
https://www.electronics-lab.com/selpic-s1-handheld-surface-quick-printing-solution/
SELPIC 1+ is a palm-sized handheld Inkjet printer that is currently on a Kickstarter fundraiser campaign well exceeding its targeted goal. This printer allows the user to print on any surface and any material. It can print any text, image, QR code, barcode by simply moving the device across the printing surface. The printing surface […]
GLUON丨Modular Desktop Collaborative Robotic Arm by SCA
https://www.electronics-lab.com/gluon%e4%b8%a8modular-desktop-collaborative-robotic-arm-sca/
GLUON desktop robotic arm, powered by INNFOS SCA QDD Lite. A best match for prototyping, photography, STEM & geeks. GLUON is an innovative creation. This robotic arm can perform much more complicated actions without being bulky and expensive. INNFOS integrated motor, drive, encoder and reducer in an all-in-one design jazzed-up actuator that created GLUON. The […]
NixieTherm RGB – Nixie Tube Thermometer
https://www.electronics-lab.com/nixietherm-rgb-nixie-tube-thermometer/
NixieTherm RGB, an IN-13 tube indoor thermometer (DIY kit or assembled) with build-in true RGB controller; powered by 5V USB A Russian Bargraph-Nixie-tube shows similar like in the good old time a mercury thermometer the room-temperature with a variable glow hight lenght; however with NixieTherm RGB you have a wonderful red-orange glow. At the same […]
FOVEA – Wearable Embedded Multimeter
https://www.electronics-lab.com/fovea-wearable-embedded-multimeter/
FOVEA is a wearable embedded analyzer — a multimeter targeted at embedded electronics with wrist-worn convenience. FOVEA, their wearable embedded analyzer does a few primary things to make embedded work easier: (a) It moves the multimeter display to a location that’s much closer to where the probes are being held, and also with almost the […]
uChip: Arduino Zero compatible in a narrow DIP-16 package!
https://www.electronics-lab.com/uchip-arduino-zero-compatible-narrow-dip-16-package/
A very small narrow-DIP-sized, Arduino Zero compatible USB dev board (OTG enabled), with integrated buck and boost power supplies! The Arduino ecosystem provides an invaluable resource of hardware and software, which allows quick development of a myriad of projects thanks to its fruitful community. Several Arduino-compatible boards came out in the past years, to increase […]
Joulescope: Precision DC Energy Analyzer
https://www.electronics-lab.com/joulescope-precision-dc-energy-analyzer/
Joulescope™ enables designers, engineers, and makers to quickly and easily optimize the energy consumption and battery life of a target device. Joulescope is designed to automatically handle wide current ranges and rapid changes in energy consumption, while allowing the target device to run normally. Jetperch LLC writes: Measuring energy consumption during product development is crucial, […]