u-blox X20 all-band GNSS module Supports Multi-Band Signals for High-Precision Positioning


https://www.electronics-lab.com/u-blox-x20-all-band-gnss-module-supports-multi-band-signals-for-high-precision-positioning/

u-blox has recently released the X20 all-band GNSS module designed to provide centimeter-level accuracy in a global market. The module includes a multi-band GNSS receiver along with an L-band receiver which receives signals from L1, L2, L5, and the new L6/E6 bands. The module also supports RTK (Real-Time Kinematic) and PPP (Precise Point Positioning) correction for […]

XIAO ESP32S3 with Wio-SX1262 LoRa Module Support for Meshtastic and IoT Applications


https://www.electronics-lab.com/xiao-esp32s3-with-wio-sx1262-lora-module-support-for-meshtastic-and-iot-applications/

Seeed Studio has recently released the XIAO ESP32S3 for Meshtastic and LoRa development kit that integrates the XIAO ESP32S3 board with the compact Wio-SX1262 LoRa module, connected via a board-to-board interface for seamless operation. The dual-core Xtensa ESP32S3 processor powers the development kit, supports LoRa (862-930MHz), Wi-Fi (2.4GHz), and Bluetooth 5.0, enabling wireless communication over […]

Synaptics SYN4383 and SYN43756(E) Tri-Band SoCs are Designed for IoT Devices, Automotive, and Industrial Applications


https://www.electronics-lab.com/synaptics-syn4383-and-syn43756e-tri-band-socs-are-designed-for-iot-devices-automotive-and-industrial-applications/

Synaptics has finally revealed the SYN4383 and the SYN43756(E) high-performance, compact tri-band SoCs, that integrate Wi-Fi, Bluetooth, and IEEE 802.15.4 radios to optimize wireless connectivity for IoT devices. Both chips support Wi-Fi 6/6E with 2×2 MIMO antenna configurations, delivering up to 1200 Mbps throughput and enabling simultaneous 2.4 GHz and 5/6 GHz band operation for […]

LumenRadio W-Modbus Offers Cable-Free Modbus RTU System for Building Automation


https://www.electronics-lab.com/lumenradio-w-modbus-offers-cable-free-modbus-rtu-system-for-building-automation/

LumenRadio has recently launched the W-Modbus solution, which offers a wireless Modbus RTU system, designed to replace traditional Modbus RTU cables. It is based on Nordic’s nRF52840 SoC, connects up to 100 nodes, includes a 100mW power amplifier, and supports Bluetooth LE for smartphone connectivity. By using their MiraMesh wireless mesh topology, W-Modbus ensures low […]

NXP RW612: A Tri-Radio Wireless MCU Integrates Wi-Fi 6, Bluetooth 5.4, and 802.15.4 for Smart Home and Industrial Automation


https://www.electronics-lab.com/nxp-rw612-a-tri-radio-wireless-mcu-integrates-wi-fi-6-bluetooth-5-4-and-802-15-4-for-smart-home-and-industrial-automation/

The NXP has recently introduced RW612, a tri-radio wireless MCU integrating Wi-Fi 6, Bluetooth Low Energy (LE) 5.4, and 802.15.4 radios. Powered by a 260 MHz Arm Cortex-M33 core with TrustZone-M, it includes 1.2 MB of SRAM and a high-bandwidth Quad SPI interface with secure decryption for off-chip XIP flash access. The Wi-Fi 6 offers […]

Microchip PIC32MZ-W1 Wi-Fi MCU Features 32-bit MIPS M-class core and comes with a dev board


https://www.electronics-lab.com/microchip-pic32mz-w1-wi-fi-mcu-features-32-bit-mips-m-class-core-and-comes-with-a-dev-board/

Microchip has recently released the PIC32MZ-W1 Wi-Fi MCU along with 20 other wifi SoCs including link controllers, network controllers, and plug-and-play modules. The most important one among them is the PIC32MZ-W1 wireless MCU because of its 32-bit MIPS M-class core running at up to 200MHz. The SoC does not only have WiFi it also has various […]

Waveshare 4-inch E-Ink Spectra 6 is a Full Color E-Paper Display for Raspberry Pi


https://www.electronics-lab.com/waveshare-4-inch-e-ink-spectra-6-is-a-full-color-e-paper-display-for-raspberry-pi/

Waveshare has recently launched the 4-inch E-Ink Spectra 6 (E6) Full-Color E-Paper Display, designed to work with Raspberry Pi 5. It is a flexible and low-power display with a resolution of 600×400 pixels. It uses SPI communication so it is compatible with several platforms such as Jetson Nano, RDK X3, Arduino, and STM32. In addition, […]

ESP32-C6 is A 1.47-inch display development board with Wi-Fi 6 and Bluetooth


https://www.electronics-lab.com/esp32-c6-is-a-1-47-inch-display-development-board-with-wi-fi-6-and-bluetooth/

Waveshare has recently introduced the ESP32-C6, a Display Development Board, a microcontroller with a 1.47-inch 172×320 resolution LCD, featuring 262K colors. It is powered by a 160MHz single-core 32-bit RISC-V processor, with an additional low-power 20MHz processor. The board supports Wi-Fi 6 (802.11 b/g/n) and Bluetooth BLE 5, making it ideal for AIoT (Artificial Intelligence of […]

HaloMax sub-1 GHz Wireless Module is designed for Long-Range Wireless Communication


https://www.electronics-lab.com/halomax-sub-1-ghz-wireless-module-is-designed-for-long-range-wireless-communication/

Teledatics has recently launched HaloMax sub-1 GHz Wireless Module, a cutting-edge long-range wireless communication module designed for sub-1 GHz frequency bands. With a funding goal of $50,000 and 10% raised so far, the project aims to transform various fields by providing robust, low-power, long-range connectivity. This module operates in the 902 to 928 MHz frequency […]

Vantron HCAM26 Wi-Fi Camera for long-range Security with local storage


https://www.electronics-lab.com/vantron-hcam26-wi-fi-camera-for-long-range-security-with-local-storage/

Vantron has recently launched the HCAM26 Wi-Fi Camera, a high-definition security camera designed for long-range security uses like in remote areas, isolated plants, and smart homes. It uses the sub-1GHz IEEE 802.11ah Wi-Fi HaLow standard for long-range connectivity, supporting up to 1 km of transmission distance with strong wall penetration capabilities. Key features include 4K […]