Waveshare Launches $9.99 RP2350-CAN Development Board with Dual-Core MCU and CAN Bus Support
https://www.electronics-lab.com/waveshare-launches-9-99-rp2350-can-development-board-with-dual-core-mcu-and-can-bus-support/
Waveshare has recently launched the RP2350-CAN development board, a Pico-like MCU board based on Raspberry Pi RP2350A SoC with onboard XL2515 CAN Bus controller and a SIT65HVD230DR CAN transceiver. The board supports the CAN V2.0B protocol specification with a communication rate up to 1 Mbps, and the XL2515 chip appears to be a clone of […]
LILYGO T-Pico 2350 Development Kit Features Raspberry Pi RP2350, ESP32-C6, 2.33-inch Color Touchscreen, and HDMI Output
https://www.electronics-lab.com/lilygo-t-pico-2350-development-kit-features-raspberry-pi-rp2350-esp32-c6-2-33-inch-color-touchscreen-and-hdmi-output/
LILYGO has announced a new model of T-Pico all-in-one development kit known as the T-Pico-2350. It is a fully integrated devkit featuring a Raspberry Pi RP2350A MCU and an Espressif ESP32-C6 SoC for wireless connectivity. The design is an update to the T-PicoC3 introduced in 2022, with the case design of the T-Display S3 Pro. […]
Adafruit ESP32-S2 Feather with w.FL Antenna Features Native USB, STEMMA QT, and Low Power Mode
https://www.electronics-lab.com/adafruit-esp32-s2-feather-with-w-fl-antenna-features-native-usb-stemma-qt-and-low-power-mode/
The Adafruit ESP32-S2 Feather with w.FL antenna connector is a compact, Feather-shaped microcontroller designed for IoT projects, wearable electronics, and smart home applications. It features an ESP32-S2 240MHz Tensilica processor plus a RISC-V ultra-low-power coprocessor, 320kB of SRAM and 128kB cache with native USB support, allowing it to function as a keyboard, mouse, MIDI device, […]
LILYGO T-Watch S3 Plus ESP32-based smartwatch upgrades with GPS and 940mAh battery
https://www.electronics-lab.com/lilygo-t-watch-s3-plus-esp32-based-smartwatch-upgrades-with-gps-and-940mah-battery/
LILYGO has recently introduced an upgraded version of their T-Watch S3 ESP32-based smartwatch, the T-Watch S3 Plus. This new smartwatch not only features Wi-Fi and Bluetooth LE but also has a MIA-M10Q GPS module for added functionality. While maintaining the open-source flexibility of its predecessor (T-Watch S3), this new model adds a larger 940mAh lithium […]
SparkFun Digi X-ON LoRaWAN dev Kit Features STM32MP1 Gateway and RP2350A IoT Node
https://www.electronics-lab.com/sparkfun-digi-x-on-lorawan-dev-kit-features-stm32mp1-gateway-and-rp2350a-iot-node/
SparkFun has recently released the Digi X-ON LoRaWAN dev Kit, an all-in-one IoT solution designed for rapid prototyping and deployment of LoRa-based systems. It includes the Digi HX15 Gateway, the SparkFun IoT Node for LoRaWAN, and the ENS160/BME280 environmental sensor module, together they offer seamless integration with the Digi X-ON Cloud for remote management, data […]
Pimoroni’s Interstate 75 W (RP2350) Brings Wireless Connectivity with LED Matrix Driver Board
https://www.electronics-lab.com/pimoronis-interstate-75-w-rp2350-brings-wireless-connectivity-with-led-matrix-driver-board/
The Interstate 75 W (RP2350) by Pimoroni is a compact, all-in-one RGB LED matrix driver board designed for HUB75-style LED panels, commonly used in video walls and digital signage. Powered by the RP2350 chip, it features a dual-core Cortex M33 processor (up to 150MHz), 4MB QSPI flash, onboard Wi-Fi (IEEE 802.11 b/g/n), and Bluetooth. It […]
Elecrow CrowPanel Advance 7.0 Review – An ESP32-Powered 7-inch HMI Display with Touchscreen and AI Capabilities for DIY and Industrial Projects
https://www.electronics-lab.com/elecrow-crowpanel-advance-7-0-review-an-esp32-powered-7-inch-hmi-display-with-touchscreen-and-ai-capabilities-for-diy-and-industrial-projects/
Introduction The Elecrow’s CrowPanel Advance 7.0-HMI ESP32 AI Display is an impressive upgrade to Elecrow’s earlier Basic Series, bringing enhanced performance, expanded features, and greater flexibility. It features a 7.0-inch high-resolution 800×480 IPS screen with a 178° wide viewing angle and capacitive touch for smooth, responsive interactions. Powered by the ESP32-S3 chip with a dual-core […]
CanMV K230 AI Development Board with Kendryte K230 RISC-V Processor and 6-TOPS NPU
https://www.electronics-lab.com/canmv-k230-ai-development-board-with-kendryte-k230-risc-v-processor-and-6-tops-npu/
The 01Studio CanMV K230 AI development board, distributed by Youyeetoo, is built around Canaan Technology’s K230 AI chip. The K230 is a 64-bit dual-core RISC-V processor operating at 1.6GHz and 800MHz, equipped with hardware floating-point support and a convolution accelerator. It integrates a neural network processing unit capable of delivering 6 TOPS, making it suitable […]
Affordable LILYGO T7-C6 Compact Development Board Featuring ESP32-C6 chip and Qwiic connector for Arduino IDE and Micropython
https://www.electronics-lab.com/affordable-lilygo-t7-c6-compact-development-board-featuring-esp32-c6-chip-and-qwiic-connector-for-arduino-ide-and-micropython/
LILYGO has recently showcased the T7-C6, a compact development board featuring the ESP32-C6-MINI-1 module with 4MB Flash. It supports wireless protocols like 2.4GHz Wi-Fi 6, Bluetooth 5 (LE), and IEEE 802.15.4, making it ideal for IoT applications. It is programmable in C/C++, Micropython, and Lua and is compatible with platforms like Arduino IDE, VS Code, […]
Pimoroni Presto Beta is An RP2350 Powered 4-Inch Touchscreen Display with RGB Backlighting and Wireless Connectivity for IoT Applications
https://www.electronics-lab.com/pimoroni-presto-beta-is-an-rp2350-powered-4-inch-touchscreen-display-with-rgb-backlighting-and-wireless-connectivity-for-iot-applications/
Pimoroni has recently launched the Presto Beta Edition, a versatile, connected desktop display companion powered by an RP2350 chip. It features a 4-inch square touchscreen with a 480×480 resolution, housed in an elegant black aluminium stand with RGB backlighting. This is designed as a programmable display and can show calendar updates, weather reports, photos, digital […]