4 Wheel Robot Motor Driver ( 4X 3Amps LMD18201 H-Bridge)
https://www.electronics-lab.com/4-wheel-robot-motor-driver-4x-3amps-lmd18201-h-bridge/
This compact board will help you to drive 4 Wheel Drive Robots, each axis can handle a load current up to 3 Amps and supply 12V – 48 V DC. Board requires two PWM and Dir. signals for full 4WD operations, mainly differential steering for taking turns left or right or complete 360 degree rotation. […]
Motor driver fits small IoT devices
https://www.electronics-lab.com/motor-driver-fits-small-iot-devices/
Susan Nordyk @ edn.com: A single-chip 2.6 A driver for brushed DC motors, STMicroelectronics’ STSPIN250 targets battery-powered portable and wearable applications. This low-voltage, energy-efficient driver integrates a power MOSFET bridge and fixed off-time PWM current controller in a tiny 3×3 mm VFQFPN package. Motor driver fits small IoT devices – [Link]
Scout ESC, A New Tank Controller Board By Open Panzer
https://www.electronics-lab.com/scout-esc-new-tank-controller-board-open-panzer/
Open Panzer Project is an attempt to create open source versions of all electronics used in RC tanks today, with professional quality and features. The goal of this project is to expand the hoppy and to improve everyone’s experience of RC tanking corner, which will speed-up its growing. Open Panzer recently developed the Scout ESC […]
AC Motor Speed Controller for Modern Appliances Using LS7311
https://www.electronics-lab.com/ac-motor-speed-controller-modern-appliances-using-ls7311/
The project specifically designed for motor speed control application in appliances such as blenders, etc. Tact switches provided for selecting/indicating from 1 to 10 power levels ( Speed Levels). The project is ideal for universal and shaded-pole motor speed control for modern appliances design. Eliminates awkward mechanical switch assemblies and multi-taped motor winding. Features 10 […]
Control a stepper motor using Raspberry Pi
https://www.electronics-lab.com/control-stepper-motor-using-raspberry-pi/
Here is a nice tutorial @ raspberrypi.org on how to control a DC motor using Python. In this guide, you’ll be controlling two motors from your Raspberry Pi using Python on the desktop. First, it’s best just to learn how to control the motor. Then, once you have it working, you could easily use your […]
Control Nema Stepper Motor With Arduino
https://www.electronics-lab.com/control-nema-stepper-motor-arduino/
Robokits @ instructables.com have an article describing stepper motors and how to drive them using Arduino. They write: Lots of People want to build Them own small Cnc machine . they started with drives stepper motor but they stacked in controller Programming . In this instructable Robokits will provide a resource to control your Stepper […]
Wembi – Closed Loop Motorupgrade for 3D Printer
https://www.electronics-lab.com/wembi-closed-loop-motorupgrade-3d-printer/
TeamVenture-Bit tipped us with their kickstarter campaign. It’s about a closed loop motor upgrade kit that will enable your 3D printer to print faster, silently and more consistently. Check it out. Boasting an advanced PID compensation system that detects issues while your 3D printer or other CNC based machine is moving, Wembi readjusts itself to […]
2X L298 Dual DC Motor Driver Board for Robots
https://www.electronics-lab.com/2x-l298-dual-dc-motor-driver-board-robots/
2x L298 H-Bridge Dual Motor driver project can control two DC motors connected to it. The circuit is designed around popular dual H-Bridge L298 from ST. Motor supply 7V To 46V DC, Load 2Amp Each Channel. Features Motor supply V2: 7 to 46 VDC Logic Supply V1 : 5V DC Input Signal: Enable, Dir. , […]
DC Motor & Direction Controller with Brake using MC33035
https://www.electronics-lab.com/dc-motor-direction-controller-brake-using-mc33035/
This is a 3AMP DC Motor speed and direction controller using MC33035 IC from on semiconductor, though the MC33035 was designed to control brushless DC motor , it may also be used to control DC brush type motors. MC33035 driving a Mosfets based H-Bridge affording minimal parts count to operate a brush type motor. On […]
Introducing Autodesk Circuits Simulator For Beginner
https://www.electronics-lab.com/introducing-autodesk-circuits-simulator-beginner/
Circuits.io is an online platform created by Autodesk for hardware hackers. It provides a browser-based application for designing, simulating electronic circuits and creating PCB boards. Autodesk circuits simulator can simulate Arduino-based projects for testing designs and programs before creating them in real life. The simulator allows you to learn electronics using a virtual Arduino board […]