BeagleBadge Packs AM62L32, ePaper, and LoRa for Wearable IoT
https://www.electronics-lab.com/beaglebadge-packs-am62l32-epaper-and-lora-for-wearable-iot/
Powered by TI AM62L32, this compact board combines ePaper, sensors, Wi-Fi, BLE, and LoRaWAN for rapid prototyping of secure edge and wearable IoT applications.
Exaviz Cruiser Board v1.0 For Raspberry Pi CM5 with 8x PoE+ and 2.5GbE
https://www.electronics-lab.com/exaviz-cruiser-board-v1-0-for-raspberry-pi-cm5-with-8x-poe-and-2-5gbe/
Designed for CM5, this Mini-ITX board integrates managed Gigabit switching, NVMe, dual SATA, HDMI, and ESP32-C6 WiFi 6/Zigbee for NVR and edge builds.
LILYGO T-Beam BPF ESP32-S3 Dev Board with LoRa, OLED, GPS, and AXP2101 PMU
https://www.electronics-lab.com/lilygo-t-beam-bpf-esp32-s3-development-board-with-sx1278-lora-oled-gps-and-axp2101-pmu/
The LILYGO T-Beam BPF is an ESP32-S3 board with SX1278 LoRa (144–148 MHz), OLED, GPS, Wi-Fi, BT 5, and AXP2101 PMU, ideal for IoT, tracking, mesh networks, and portable wireless projects.
LILYGO T-Display Bar: ESP32-S3 Board with Touchscreen & AI Sensor
https://www.electronics-lab.com/lilygo-t-display-bar-esp32-s3-board-with-2-25-inch-rgb-ips-touch-display-wi-fi-bluetooth-sensors-and-expansion-options/
This compact ESP32-S3 board features a 2.25" color touchscreen, Wi-Fi, and Bluetooth. It includes an AI smart sensor and IMU for fitness tracking and other DIY projects.
Adafruit Sparkle Motion – ESP32-S3-Based LED Controller with I2S Mic, 4 Outputs, USB-C PD, and WLED/xLights Support
https://www.electronics-lab.com/adafruit-sparkle-motion-esp32-s3-based-led-controller-with-i2s-mic-4-outputs-usb-c-pd-and-wled-xlights-support/
The Adafruit Sparkle Motion with wFL Antenna is an ESP32-based board designed for WLED and xLights smart LED projects. It uses the classic dual-core 240MHz Tensilica ESP32 module with 4MB flash, supporting Wi-Fi, Bluetooth LE, and Bluetooth Classic. The board is optimized for compatibility with WLED and supports various LED configurations from small wearable setups […]
LILYGO T-Pico 2350 Development Kit Features Raspberry Pi RP2350, ESP32-C6, 2.33-inch Color Touchscreen, and HDMI Output
https://www.electronics-lab.com/lilygo-t-pico-2350-development-kit-features-raspberry-pi-rp2350-esp32-c6-2-33-inch-color-touchscreen-and-hdmi-output/
LILYGO has announced a new model of T-Pico all-in-one development kit known as the T-Pico-2350. It is a fully integrated devkit featuring a Raspberry Pi RP2350A MCU and an Espressif ESP32-C6 SoC for wireless connectivity. The design is an update to the T-PicoC3 introduced in 2022, with the case design of the T-Display S3 Pro. […]
P42 Pico2 M.2: Raspberry Pi RP2350A Development Board with M.2 A/E-Key Interface and Optional RISC-V Hazard3 Core
https://www.electronics-lab.com/p42-pico2-m-2-raspberry-pi-rp2350a-development-board-with-m-2-a-e-key-interface-and-optional-risc-v-hazard3-core/
The P42 Pico2 M.2 may look like an M.2 module, but it’s actually a Raspberry Pi RP2350 development board in M.2 3024 form factor. The M.2 interface has USB, UART, I2C, and control IO [Input/Output] connectivity. Adding an RP2350 microcontroller, the P42 Pico2 M.2 pops a Raspberry Pi’s second-generation in-house microcontroller design into any A-key […]
BlackIoT Polverine: ESP32-S3, BMV080, and BME690-Based Environmental Sensing Board for Real-Time Air Quality Monitoring
https://www.electronics-lab.com/blackiot-polverine-esp32-s3-bmv080-and-bme690-based-environmental-sensing-board-for-real-time-air-quality-monitoring/
BlackIoT Polverine is a mikroBUS-compatible environmental sensing board designed for real-time air quality monitoring. It features the ESP32-S3-MINI-1 MCU, Bosch Sensortec’s BMV080 PM2.5 sensor, and BME690 gas sensor. The board supports Wi-Fi (802.11 b/g/n) and Bluetooth 5 connectivity and is available through the Crowd Supply crowdfunding platform. The ESP32-S3-MINI-1, powered by an Xtensa 32-bit LX7 […]
Advanced Muscle Sensing with SparkFun MyoWare 2.0 Wireless Shield Featuring an ESP32-WROOM Module
https://www.electronics-lab.com/advanced-muscle-sensing-with-sparkfun-myoware-2-0-wireless-shield-featuring-an-esp32-wroom-modul/
The SparkFun MyoWare 2.0 Wireless Shield can be called an accessory designed to work seamlessly with the MyoWare 2.0 Muscle Sensor. The module is built around an ESP32-WROOM module and houses a built-in 40mAh LiPo battery for wearable applications. Application includes Prosthetics and Assistive Devices, Educational Projects, Wearable, and Robotics. The MyoWare sensor measures muscle […]
SparkFun ESP32-C6 Thing Plus an ESP32-C6 Based Dev Board with Qwiic Connector
https://www.electronics-lab.com/sparkfun-esp32-c6-thing-plus-an-esp32-c6-based-dev-board-with-qwiic-connector/
The SparkFun ESP32-C6 Thing Plus features the ESP32-C6 WROOM-1-N16 module, supporting WiFi 6, Bluetooth 5.3, Zigbee, and Thread for diverse wireless project applications. Equipped with a microSD slot, Qwiic connector, and Feather-compatible footprint, it’s designed for seamless integration in IoT and smart device development. With the launch of the SparkFun ESP32-C6 Thing Plus, SparkFun has […]