Radxa Dual 2.5G Router HAT Brings 2x 2.5GbE Ports and M.2 NVMe to Raspberry Pi and ROCK SBCs
https://www.electronics-lab.com/radxa-dual-2-5g-router-hat-brings-2x-2-5gbe-ports-and-m-2-nvme-to-raspberry-pi-and-rock-sbcs/
Radxa recently introduced the Dual 2.5G Router HAT, a high-performance network and storage expansion board designed for Radxa single-board computers (SBCs) and the Raspberry Pi 5. It boosts device capabilities by adding two 2.5GbE Ethernet ports via RTL8125BG controllers, an M.2 M Key slot for NVMe SSDs, and a PCIe FPC connector for further expansion. […]
Pironman 5-Max PC Case for Raspberry Pi 5 Features Dual NVMe, Hailo-8L Support, RGB Fans, and 0.96-inch OLED
https://www.electronics-lab.com/pironman-5-max-pc-case-for-raspberry-pi-5-features-dual-nvme-hailo-8l-support-rgb-fans-and-0-96-inch-oled/
SunFounder has recently unveiled a new PC case named as the Pironman 5-Max for the Raspberry Pi 5, supporting Hailo-8L AI Accelerator PWM Tower Cooler. Pironman 5-Max is an update of the Pironman 5 tower PC case for the Raspberry Pi 5 with a new sleeker design made of black aluminium and semi-transparent black acrylic […]
Radxa Dual 2.5G Router HAT Adds High-Speed Networking and NVMe Storage to Raspberry Pi 5 and ROCK SBCs
https://www.electronics-lab.com/radxa-dual-2-5g-router-hat-adds-high-speed-networking-and-nvme-storage-to-raspberry-pi-5-and-rock-sbcs/
The Radxa Dual 2.5G Router HAT is an expansion board targeted at Radxa ROCK SBCs and the Raspberry Pi 5. It provides two 2.5GbE Ethernet ports driven by the Realtek RTL8125B controller, which supports high-speed networking. To support storage expansion, it has an M.2 M-Key interface with a PCIe Gen3 x1 interface that supports NVMe […]
CrowPi 3 Review – Portable Raspberry Pi-based Learning Kit with Touchscreen, Sensors, and Python Lessons for Students and Makers
https://www.electronics-lab.com/crowpi-3-review-portable-raspberry-pi-based-learning-kit-with-touchscreen-sensors-and-python-lessons-for-students-and-makers/
Introduction In today’s world, many people use technology without fully grasping how it works. Still, Elecrow’s CrowPi 3 is here to change that, offering a new addition to their Raspberry Pi-based learning kit. But there’s a growing number of curious minds who want to go deeper to be built, experimented with, and created. For them, the […]
FourthirdEye V1.0 – Micro Four Thirds (M4/3) Camera Module for Raspberry Pi 5 and CM4 with IMX294 Sensor and Open-Source Design
https://www.electronics-lab.com/fourthirdeye-v1-0-micro-four-thirds-m4-3-camera-module-for-raspberry-pi-5-and-cm4-with-imx294-sensor-and-open-source-design/
The FourthirdEye V1.0 is a Micro Four Thirds (M4/3) camera module designed specifically for the Raspberry Pi 5 and other Raspberry Pi boards that support 4-lane MIPI interfaces, such as the Compute Module 4 IO board. Developed by Will Whang’s Electronics in Taiwan, it uses the IMX294 image sensor and is ideal for advanced users […]
Pimoroni Raspberry Pi PoE+ Injector Brings Plug-and-Play Power Over Ethernet
https://www.electronics-lab.com/pimoroni-raspberry-pi-poe-injector-brings-plug-and-play-power-over-ethernet/
Pimoroni has introduced the Raspberry Pi PoE+ Injector, a compact device designed to add Power-over-Ethernet (PoE) functionality to a single port on a non-PoE Ethernet switch. It delivers both power and data through a single Ethernet cable, offering a cost-effective, plug-and-play solution for integrating PoE into existing Ethernet networks. The injector supports devices compliant with […]
Raspberry Pi 5 PCIe Expansion Board: A x1 Slot FFC Connector
https://www.electronics-lab.com/raspberry-pi-5-pcie-expansion-board-a-x1-slot-ffc-connector/
The Spotpear’s Pi5 PCIe Standard Slot Adapter, also termed as Raspberry Pi 5 PCIe Expansion Board, that provides PCIe expansion for the Raspberry Pi 5 SBC, is a standard PCIe adapter that can provide users with flexibility and connectivity options. It is compatible with both PCIe Gen2, Gen3 standards and comes with an external 12V […]
Seeed Studio PCIe 3.0 to Dual M.2 HAT+ Brings ASMedia ASM2806 PCIe Switch to Raspberry Pi 5 for NVMe SSDs and AI Accelerators
https://www.electronics-lab.com/seeed-studio-pcie-3-0-to-dual-m-2-hat-brings-asmedia-asm2806-pcie-switch-to-raspberry-pi-5-for-nvme-ssds-and-ai-accelerators/
Seeed Studio has introduced an entry-level Raspberry Pi 5 expansion board, the PCIe 3.0 to Dual M.2 HAT+, which supports the PCIe 3.0 standard instead of PCIe 2.0. This HAT+ provides dual M.2 slots and features the ASMedia ASM2806 PCIe 3.0 switch, delivering up to 8GT/s shared bandwidth through the Raspberry Pi 5’s PCIe Gen3 […]
Raspberry Pi 5 Launched with Faster CPU, PCIe Support, and Up to 16GB RAM
https://www.electronics-lab.com/raspberry-pi-5-launched-with-faster-cpu-pcie-support-and-up-to-16gb-ram/
Raspberry Pi has launched the Raspberry Pi 5, a powerful, next-generation SBC (single-board computer) available in multiple RAM variants, designed for various applications, like personal computing, education, and professional use. It offers up to 2–3× the speed of its predecessor, featuring the Broadcom BCM2712 quad-core Arm Cortex-A76 processor running at 2.4GHz and supporting up to […]
Raspberry Pi Touch Display 2 is A 7-inch Capacitive Touchscreen with 720×1280 Resolution
https://www.electronics-lab.com/raspberry-pi-touch-display-2-is-a-7-inch-capacitive-touchscreen-with-720x1280-resolution/
Raspberry Pi has recently launched its Touch Display 2, a 7-inch touchscreen display designed for Raspberry Pi computers. With a resolution of 720 × 1280 pixels, the display features a TFT LCD with anti-glare treatment and a five-finger capacitive touch panel. It connects to Raspberry Pi devices via a ribbon cable to the DSI port […]