SparkFun Big Easy Driver Kit
Motor

SparkFun Big Easy Driver Kit

SparkFun Big Easy Driver Kit is ideal for robots, automatic dog doors, and moving platforms. The Big easy driver kit can drive up to a maximum of 2A per phase of a bipolar stepper motor. This driver is a chopper micro-stepping driver that defaults to a 16 step micro-stepping mode. The...

Continue Reading
1.106
Views
0 Comments
SparkFun’s Qwiic Tsunami Super WAV Trigger
ArduinoAudio

SparkFun’s Qwiic Tsunami Super WAV Trigger

Qwiic Tsunami Super WAV Trigger is a powerful polyphonic embedded audio player designed by SparkFun in collaboration with James Robertson's robertsonics. The super powerful audio board is capable of producing high-quality audio. The audio board is "polyphonic," in contrast to most...

Continue Reading
1.829
Views
0 Comments
SparkFun AP63203 Buck/BabyBuck Regulator Breakouts
Power

SparkFun AP63203 Buck/BabyBuck Regulator Breakouts

SparkFun AP63203 Buck/BabyBuck Regulator Breakouts are 2A synchronous buck converter boards that operate at 3.8V to 32V wide input voltage range. These breakouts integrate a 125mΩ high-side and a 68mΩ low-side power MOSFET that provides high-efficiency step-down DC/DC...

Continue Reading
1.678
Views
0 Comments
SparkFun QuickLogic Thing Plus featuring EOS S3 MCU and eFPGA is now available at $45.95
FPGA

SparkFun QuickLogic Thing Plus featuring EOS S3 MCU and eFPGA is now available at $45.95

SparkFun QuickLogic Thing Plus was originally crowdfunded on CrowdSupply that raised around $4500. If you did not back the product back then, no worries, you can buy it now on the SparkFun product page. SparkFun QuickLogic Thing Plus is a powerful FPGA board that comes with a...

Continue Reading
1.922
Views
1 Comments
SparkFun RedBoard Plus Development Board
Arduino

SparkFun RedBoard Plus Development Board

SparkFun RedBoard Plus Development Board is an Arduino-compatible board that is similar to an Arduino Uno with many extra perks. This DEV-1858 development board utilizes a handy Qwiic Connect System that means no soldering or shields are required to connect it to the rest of the...

Continue Reading
1.652
Views
0 Comments
Meet the Photoacoustic Sensing Based SCD41 CO2 Sensor; The Latest Addition to Sparkfun’s QWiiC Ecosystem
Sensor

Meet the Photoacoustic Sensing Based SCD41 CO2 Sensor; The Latest Addition to Sparkfun’s QWiiC Ecosystem

Sparkfun's QWiiC ecosystem comprises of I2C based components which through 4-pin JST connectors can be quickly interfaced with development boards. The product line, which already features over 1800 products including, sensors, actuators, and QWiiC enabled development boards, keeps growing...

Continue Reading
1.923
Views
0 Comments
SparkFun Thing Plus – STM32 (DEV-17712)
IoT

SparkFun Thing Plus – STM32 (DEV-17712)

SparkFun Electronics Thing Plus - STM32 offers power and precision with a 32-bit ARM® Cortex®-M4 RISC core. The Thing Plus provides a DFU bootloader for uploading code and incorporates an extensive range of enhanced I/Os and peripherals. The STM32 Thing Plus utilizes the handy Qwiic...

Continue Reading
1.785
Views
0 Comments
SparkFun Qwiic Haptic Driver – DA7280
Motor

SparkFun Qwiic Haptic Driver – DA7280

SparkFun Qwiic Haptic Driver - DA7280 includes a Linear Resonant Actuator (LRA) vibration motor and Dialog Semiconductor's DA7280 motor driver IC for applications that require haptic feedback. Control the vibration motor with the DA7280 via I2C, PWM, or a combination of three...

Continue Reading
1.735
Views
0 Comments
Get new posts by email:
Get new posts by email:

Join 97,426 other subscribers

Archives