Littelfuse’s Solid-State Relay Features Fast Switching in a Space-Saving Package
https://www.electronics-lab.com/littelfuses-solid-state-relay-features-fast-switching-in-a-space-saving-package/
The CPC1056N relay delivers high input-to-output isolation and fast switching speeds for space-constrained applications, including medical devices, EV infrastructure, and consumer electronics.
Ikalogic Launches Modular 2×16 RF Switch Matrix for Automated Test Environments
https://www.electronics-lab.com/ikalogic-launches-modular-2x16-rf-switch-matrix-for-automated-test-environments/
The CS8216 is an 8 GHz RF switch matrix that features less than 1 µs switching times and a USB control interface for simplified RF test workflows.
Toshiba’s Switched Mode Power Supply Library: A Tool for Power Supply Circuit Design
https://www.electronics-lab.com/toshibas-switched-mode-power-supply-library-a-tool-for-power-supply-circuit-design/
With the Switched Mode Power Supply Library, you can select and download various circuit designs based on your actual requirements to verify the behavior of MOSFETs in your simulation environment.
Synchronous MOSFET H-Bridge DC-DC controller with built-in protection features
https://www.electronics-lab.com/synchronous-mosfet-h-bridge-dc-dc-controller-with-built-in-protection-features/
LITIX™ Power TLD5191ES is a synchronous 4 – switch buck-boost DC/DC controller with built-in protection features. This concept is beneficial for driving high-power LEDs with maximum system efficiency and a minimum number of external components for automotive exterior lighting. Key features MOSFET 4 – switch buck-boost DC/DC controller for high power buck-boost LED control Constant […]
Maxim Integrated MAX17625 Synchronous Step-Down Converters
https://www.electronics-lab.com/maxim-integrated-max17625-synchronous-step-down-converters/
Maxim Integrated MAX17625 Synchronous Step-Down Converters have integrated MOSFETs and compensation components. These operate over a 2.7V to 5.5V input voltage range. The MAX17625 supports up to 700mA load current and allows the use of small, low-cost input and output capacitors. The output voltage can be adjusted from 0.8V to 3.3V. When the EN pin […]
TPS61023 – 3.7-A boost converter with 0.5-V ultra-low input voltage
https://www.electronics-lab.com/tps61023-3-7-a-boost-converter-with-0-5-v-ultra-low-input-voltage/
TPS61023 device is a synchronous boost converter with 0.5-V ultra-low input voltage. The device provides a power supply solution for portable equipment and smart devices powered by various batteries and super capacitors. The TPS61023 has typical 3.7-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to […]
Texas Instruments TPS61023 3A Boost Converters have input voltage as low as 0.5V
https://www.electronics-lab.com/texas-instruments-tps61023-3a-boost-converters-have-input-voltage-as-low-as-0-5v/
Texas Instruments TPS61023 3A Boost Converters provide a power supply solution for portable equipment and smart devices powered by various batteries and supercapacitors. The TPS61023 has a typical 3.7A valley switch current limit over a full temperature range and a 0.5V ultra-low input voltage. The TPS61023 supports supercapacitor backup power applications with a wide input […]
TPS61094 – 60-nA quiescent current bi-directional buck/boost converter with bypass mode
https://www.electronics-lab.com/tps61094-60-na-quiescent-current-bi-directional-buck-boost-converter-with-bypass-mode/
Texas Instruments’ synchronous converter features bypass mode and supercapacitor management Texas Instruments’ TPS61094 is a synchronous bidirectional buck/boost converter with a bypass switch that provides a power supply solution for smart meters and super capacitor backup power applications. The TPS61094 has a wide input voltage range and output voltage up to 5.5 V. The device works in […]
MAX77540 Step-down converter boasts 94 % peak efficiency
https://www.electronics-lab.com/max77540-step-down-converter-boasts-94-peak-efficiency/
The MAX77540 from Maxim Integrated is a high-efficiency step-down converter with two 3 A switching phases. It uses an adaptive COT (constant on-time) current-mode control architecture, and the two 3 A switching phases can be configured as either one (2Φ, 6 A) or two (1Φ, 3 A each) outputs. Its wide input voltage range enables […]
MP2384C Synchronous Buck Converter with Forced CCM
https://www.electronics-lab.com/mp2384c-synchronous-buck-converter-with-forced-ccm/
MPS’ 24 V, 4 A, low IQ converter requires a minimal number of external components and is available in a QFN-11 (2 mm x 2 mm) package MPS’ MP2384C fully integrated, high-frequency, synchronous, rectified, step-down, switch-mode converter with forced continuous conduction mode (CCM) offers a highly compact solution that achieves 4 A of continuous output […]