STEVAL-L6986IV1 Synchronous Iso-Buck Converter Evaluation Board
https://www.electronics-lab.com/steval-l6986iv1-synchronous-iso-buck-converter-evaluation-board/
STMicroelectronics’ evaluation board with dual isolated output is based on the L6986I STMicroelectronics’ 38 V, 5 W synchronous iso-buck converter evaluation board generates two isolated voltages (approx. +18 V and between -4 V and -5 V), suitable for supplying IGBT/SiC MOSFET gate drivers or a single isolated voltage using a simple bypass. The board features […]
LinkSwitch-TNZ Switching Power Supply IC
https://www.electronics-lab.com/linkswitch-tnz-switching-power-supply-ic/
Power Integrations’ switching IC saves 60% of standby power in smart home products With integrated lossless AC zero-cross detection, Power Integrations’ LinkSwitch-TNZ ICs provide best-in-class light load efficiencies, enabling more system features to be powered in standby while still meeting stringent standby regulations. At the same time, component count is reduced by more than 40% compared […]
onsemi / Fairchild FAN53526 Programmable TinyBuck® Regulators
https://www.electronics-lab.com/onsemi-fairchild-fan53526-programmable-tinybuck-regulators/
onsemi / Fairchild FAN53526 Digitally Programmable TinyBuck® Regulators are switching voltage regulators that provide a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The FAN53526 has an output voltage programmed through an I2C interface capable of operating up to 3.4MHz. The FAN53526 utilizes a proprietary architecture with synchronous rectification delivering 3.0A […]
Isolated 50 W Quarter-Brick DC/DC Converter – 0RQB-50Y Series
https://www.electronics-lab.com/isolated-50-w-quarter-brick-dc-dc-converter-0rqb-50y-series/
Bel Power Solutions’ DC/DC converters are offered in 5V, 12V, 15V, and 48V output options, with high input to output efficiency Bel Power Solutions’ 0RQB-50Y05x series isolated DC/DC converter provides 50 W of output power from wide input voltage ranges: 24 V, 48 V, 72 V, 96 V, and 110 V typical with a maximum of 154 V. The quarter-brick converters provide […]
LTC7818 – 40V, Low IQ, 3MHz, Triple Output Buck/Buck/Boost Synchronous Controller
https://www.electronics-lab.com/ltc7818-40v-low-iq-3mhz-triple-output-buck-buck-boost-synchronous-controller/
Analog Devices LTC7818 Triple Output Synchronous Controllers are high-performance synchronous DC/DC switching regulator controllers that drive all N-channel power MOSFET stages. Its constant frequency current mode architecture allows a phase-lockable switching frequency of up to 3MHz. The LTC7818 operates from a wide 4.5V to 40V input supply range. When biased from the output of the […]
ON Semiconductor NCP1342 is a highly integrated quasi-resonant flyback controller
https://www.electronics-lab.com/on-semiconductor-ncp1342-is-a-highly-integrated-quasi-resonant-flyback-controller/
The NCP1342 is a highly integrated quasi-resonant flyback controller suitable for designing high-performance off-line power converters The NCP1342 is a highly integrated quasi-resonant flyback controller suitable for designing high-performance off-line power converters. The integrated X2 capacitor-discharge feature enables the NCP1342 to achieve no-load power consumption below 30 mW. The controller features proprietary valley-lockout circuitry, ensuring […]
BD9G500EFJ-LA Single Buck DC/DC Converter
https://www.electronics-lab.com/bd9g500efj-la-single-buck-dc-dc-converter/
ROHM’s BD9G500EFJ-LA is a 7 V to 76 V input, 5 A integrated high-side MOSFET, single buck DC/DC converter ROHM’s BD9G500EFJ-LA is a buck DC/DC converter with built-in low on-resistance high-side power MOSFET. It is capable of providing a current of up to 5 A. Current mode architecture provides fast transient response and simple phase […]
STMicroelectronics A6986I automotive 38 V, 5W Iso-Buck converter
https://www.electronics-lab.com/stmicroelectronics-a6986i-automotive-38-v-5w-iso-buck-converter/
The A6986I is an automotive-grade device specifically designed for the isolated buck topology The A6986I is an automotive-grade device specifically designed for the isolated buck topology. The 100% duty cycle capability and the wide input voltage range meet the cold crank and load dump specifications for automotive systems. The primary output voltage can be accurately […]
Buck converter PCB design replaces TO-220 regulators
https://www.electronics-lab.com/buck-converter-pcb-design-replaces-to-220-regulators/
Linear voltage regulators are used to maintaining a steady output voltage. They are step-down converters where the input voltage is always higher than the output voltage. The output voltage can be adjusted by external resistors. 78xx series is a very popular linear voltage regulator series. 78xx series, however, do not require external components for setting […]
Murata Power Solutions MYR Series Ultra-small .5A to 2A DC/DC Converters
https://www.electronics-lab.com/murata-power-solutions-myr-series-ultra-small-5a-to-2a-dc-dc-converters/
Murata’s MYR series are the PicoBK™ DC/DC converters that integrate a coil and a control IC. The ultra-small form-factor measures 2.5 mm x 2.0 mm x 1.0 mm. The MYR series is significantly smaller than discrete solutions. In most cases, these modules occupy less than half the footprint of the same solution implemented with discrete […]