Portable Adjustable Mini Power supply
https://www.electronics-lab.com/portable-adjustable-mini-power-supply/
Mixed Output @ instructables.com has build a nice power supply by combining different power modules. As most of my project involve electronics of some sort, having a good power supply is essential to be able to meet the demand of different power requirements. So I built me a bench-top power supply from an old ATX power […]
Teardown: Amazon Dash Button keeps you connected
https://www.electronics-lab.com/teardown-amazon-dash-button-keeps-you-connected/
Brian Dipert @ edn.com has done a teardown on Amazon’s dash button and shows the parts inside. How much hardware was Amazon able to squeeze into such a diminutive bill-of-materials budget, or perhaps more accurately, how much are Amazon and its consumable-supplier partners subsidizing the initial hardware cost in the hope of plenty of future generated […]
Sensirion Tiny sensor hones temperature accuracy
https://www.electronics-lab.com/sensirion-tiny-sensor-hones-temperature-accuracy/
Housed in a tiny 8-pin DFN package, the STS31 digital temperature sensor from Sensirion guarantees accuracy to within ±0.3°C over a temperature range of -40°C to +90°C. A low-cost version, the STS30 achieves the same accuracy over a temperature range of 0°C to +65°C. Both devices are only 0.9 mm high and occupy a footprint […]
Hardware serial port monitor over WiFi
https://www.electronics-lab.com/hardware-serial-port-monitor-with-wifi/
This tutorial shows how to connect Arduino to the TX line (of a router, RPI) and display serial data on smartphone over WiFi. Arduino listens for serial port communication on its hardware serial port. Then it sends every received line of data trough software serial port to ESP8266. ESP8266 puts every received line of data […]
DIY Wearable Posture Sensor
https://www.electronics-lab.com/diy-wearable-posture-sensor/
With the help of this wearable device you can improve your posture as it will remind you whenever you slouch. The device is based on ADXL335 accelerometer and Attiny85 microcontroller and a vibration motor will get you notified. Posture sensors/monitors have been a recurring theme on this blog. They are supposed to remind you of your posture […]
Wifi Home Thermostat
https://www.electronics-lab.com/web-enabled-home-thermostat/
asheville makers @ instructables.com has posted a Wifi enabled thermostat that can be programmed via a touch screen display or via the internet. This Instructable explains about how I built WiFi enabled thermostats for my home. The thermostats are programmable with 6 different time periods during the day, although increasing that to any arbitrary number would […]
4A Bipolar Stepper Motor Driver Based on LV8727E
https://www.electronics-lab.com/4a-bipolar-stepper-motor-driver-based-on-lv8727e/
The Project is based on LV8727E IC from ON Semiconductor. The LV8727 is a PWM current-controlled micro step bipolar stepping motor driver. This driver can provide eight ways of micro step resolution of 1/2, 1/8, 1/16, 1/32, 1/64, 1/128, 1/10, 1/20, and can drive simply by the step input. This Bipolar Driver works with supply […]
4A Bipolar Stepper Motor Driver Based on LV8727E
https://www.electronics-lab.com/project/4a-bipolar-stepper-motor-driver-based-on-lv8727e/
The Project is based on LV8727E IC from ON Semiconductor. The LV8727 is a PWM current-controlled micro step bipolar stepping motor driver. This driver can provide eight ways of micro step resolution of 1/2, 1/8, 1/16, 1/32, 1/64, 1/128, 1/10, 1/20, and can drive simply by the step input. This Bipolar Driver works with supply […]
PWM dimmer for RGB LED
https://www.electronics-lab.com/pwm-dimmer-for-rgb-led/
Lukas Fassler has designed and built a PWM dimmer for RGB LED: In my last post I’ve described the design and construction of my LED dimmer project. This project here is similar but a bit more involved. It controls RGB LEDs so it can not only change the brightness but also the color of the […]
Arduino DS18B20 Thermometer on iOS or Android
https://www.electronics-lab.com/arduino-ds18b20-thermometer-on-ios-or-android/
maroelawerner @ instructables.com has a tutorial on how to display temperature data on an Android or iOS device using Arduino and Blynk app. In this Instructable I am going to attempt to show you how to put together a little project to use the Blynk app (optainable at http://www.blynk.cc/) to display the temperature remotely on a […]