SaraKIT is A Raspberry Pi CM4 Expansion Board for ChatGPT-Enhanced Voice and Motor Control
https://www.electronics-lab.com/sarakit-is-a-raspberry-pi-cm4-expansion-board-for-chatgpt-enhanced-voice-and-motor-control/
The SaraKIT is an open-source Raspberry Pi CM4 expansion board for the Raspberry Pi CM4. The highlighting feature of this board is its ChatGPT-enabled voice assistant, thanks to its three sensitive microphones. This board also has two BLDC motor controllers, accelerometers, gyroscopes, and various sensors. SaraAI also extended its support for platforms like Amazon Alexa, […]
Introducing CAPUF’s Feature-Rich CH32V003 Development Board
https://www.electronics-lab.com/3-introducing-capufs-feature-rich-ch32v003-development-board/
CAPUF Embedded recently released an All-in-One MCU Development Board powered by the popular CH32V003 microcontroller. This board includes a 0.96-inch 128×64 pixel OLED display, along with an integrated buzzer and RGB LED for enhanced functionality. After the initial release of this 10-cent microcontroller, we have seen a lot of development boards built on top of […]
MaTouch is A ESP32-S3 Based Rotary Display Module for IoT Applications
https://www.electronics-lab.com/matouch-is-a-esp32-s3-based-rotary-display-module-for-iot-applications/
MaTouch is a rotary encoder with a circular display attached to it. This nifty device is designed and developed by Makerfabs and powered by an ESP32-S3 module. Priced at $44.80 this this compact gadget features Bluetooth and Wi-Fi capabilities and can be used for IoT applications. A year back I came around to this DIY […]
Expand Raspberry Pi 5 Storage with Pineberry Pi’s NVMe Hats
https://www.electronics-lab.com/expand-raspberry-pi-5-storage-with-pineberry-pis-nvme-hats/
To fully harness the capabilities of the PICe on Raspberry Pi 5, Pineberry Pi has released two new PICe NVMe Expansion Boards The HatDrive Top and HatDrive Bottom. Both bordas are designed to increase the storage capacity of Raspberry Pi 5 using NVMe technology. A few months back, the Raspberry Pi Foundation introduced the new […]
Microchip’s PIC18-Q20: Microcontroller with native I3C interface compatibility
https://www.electronics-lab.com/microchips-pic18-q20-microcontroller-with-native-i3c-interface-compatibility/
Microchip has introduced the PIC18-Q20 microcontroller product line, bringing forth a set of versatile chips available in 14- and 20-pin packages. These microcontrollers not only support multi-voltage I/O but also mark a significant milestone as the first low-pin count microcontroller with an I3C target mode. The I3C target mode is a distinctive capability of these […]
Blues Wireless released a new line of Notecards supporting Wi-Fi and cellular connectivity
https://www.electronics-lab.com/blues-wireless-released-a-new-line-of-notecards-supporting-wi-fi-and-cellular-connectivity/
Streamlining IoT Connectivity with Blues Wireless’s Notecards and Notehub Blues Wireless, a provider of IoT connectivity, has announced a new line of Notecards. A Notecard is a versatile and compact IoT connectivity module that facilitates easy and efficient communication between IoT devices and the cloud. It acts as a bridge that enables IoT devices to […]
Make Wireless Pentesting Easy with ESP32-DIV
https://www.electronics-lab.com/make-wireless-pentesting-easy-with-esp32-div/
ESP32-DIV is a palm-sized wireless pen-testing device powered by an ESP32. It features an ST7735 TFT LCD display and can perform Packet Monitoring, Wi-Fi Scanning, Beacon Spamming, and Deauth Detection. The ESP32-DIV combines the powerful ESP32 microcontroller with an ST7735 TFT LCD screen, along with four microswitches, a buzzer, and a few additional switches making […]
TickTagOpenSource is an Open-Source GPS Logger for Wildlife Tracking
https://www.electronics-lab.com/ticktagopensource-is-an-open-source-gps-logger-for-wildlife-tracking/
Built on an open-source sentiment, TickTagOpenSource is a versatile GPS tracker featuring customizable hardware and user-friendly firmware. Complementing these features is an intuitive Android app, accompanied by detailed assembly guides and numerous other resources. In wildlife research and conservation, GPS trackers are essential, But the problem is, that commercial GPS trackers are often expensive, and […]
Arduino Announces Major Upgrades to Cloud Platform, Enhancing IoT Experience
https://www.electronics-lab.com/arduino-announces-major-upgrades-to-cloud-platform-enhancing-iot-experience/
In a recent update, the Arduino team announced significant updates to their Arduino Cloud platform, while taking notes on user feedback to enhance its functionality and design. Improvements include a new user interface, improved sketch management, and enhanced IoT project templates. In an announcement, Team Arduino stated At Arduino, we’ve always believed in the power […]
Taking UI Design to the Next Level with Arduino’s GIGA Display Shield
https://www.electronics-lab.com/taking-ui-design-to-the-next-level-with-arduinos-giga-display-shield/
The Arduino GIGA Display Shield is feature-packed, with a multitouch display, microphone, IMU for motion, and the option to add a camera sensor. Arduino is calling on makers to elevate their user interface design skills by introducing the Arduino GIGA Display Shield. This add-on board will revolutionize the world of DIY electronics, boasting an array […]