Signal Conditioning Module for Magnetic Rotary Encoder with Clock and Up/Down Direction Signal Output
https://www.electronics-lab.com/project/signal-conditioning-module-for-magnetic-rotary-encoder-with-clock-and-up-down-direction-signal-output/
This is a highly sensitive, temperature-stable magnetic sensing module ideal for use in ring magnet-based, speed, and direction systems located in harsh automotive and industrial environments. The module is a complete solution to make a magnet-based rotary encoder, which provides clock and up/down direction signal output. The circuit consists of A1230 and LS7184 chips. A1230 […]
3D Effect Audio Processor
https://www.electronics-lab.com/project/3d-effect-audio-processor/
The project presented here is a 3D sound processor, that regenerates 3D sound to stereo speakers. The board is able to regenerate 3D sound from a stereo audio input. It features of wide operating voltage range, wide dynamic range, and low output noise and is suitable for any audio application. This tiny module can add […]
Ground Isolation Audio Amplifier for Automotive Applications
https://www.electronics-lab.com/project/ground-isolation-audio-amplifier-for-automotive-applications/
This Ground Isolation Amplifier is developed for car and automotive applications. The board efficiently eliminates problems caused by wiring resistance and removes noise generated by other electrical devices used in automobile environment. In a car or automotive the audio system is grounded to the car body. For this reason, electrical noise generated by the car […]
KiCad Conference 2023 (KiCon) to be held in A Coruña, Spain
https://www.electronics-lab.com/news/kicad-conference-2023-kicon-to-be-held-in-a-coruna-spain/
The KiCad Conference will be held in person on September 9-10, 2023 at Palacio de Exposiciones y Congresos de A Coruña (Palexco). KiCad is a free and open-source software suite for the design, simulation, and fabrication of electronic circuits. It is available worldwide for use on Windows, MacOS, and Linux platforms. Professionals from all over […]
Node Red with MQTT on Raspberry Pi
https://www.electronics-lab.com/project/node-red-with-mqtt-on-raspberry-pi/
This tutorial will guide you to integrate the MQTT on Raspberry Pi via the Node-Red platform. Node-RED is a flow-based development tool for the visual programming of hardware devices, and it is widely used for the Internet of Things. In addition, Node-RED provides a web browser-based flow editor, which can be used to create JavaScript […]
Danalogx’s Microamp-Meter- High-speed Wi-fi Current Meter and Micro SD card Logger – A Review
https://www.electronics-lab.com/news/danalogx-s-microamp-meter-high-speed-wi-fi-current-meter-and-micro-sd-card-logger-a-review/
MicroAmp-Meter The DanalogX MicroAmp-Meter is a device that functions as a high-speed Wi-Fi current profiler and Micro SD card logger. The MicroAmp-Meter is a highly efficient portable current meter that can quickly measure and plot the current consumption of embedded devices. It is an excellent tool, and with its automatic shunt-switching mechanism, it is able […]
Sound to RC Servo Driver v2.0 – Arduino Compatible
https://www.electronics-lab.com/project/sound-to-rc-servo-driver-v2-0-arduino-compatible/
The project presented here is made for applications such as Animatronics, Puppeteer, sound-responsive toys, and robotics. The Arduino compatible board consists of LM358 OPAMP, ATMEGA328 microcontroller, microphone, and other components. The project moves the RC servo once receives any kind of sound. The rotation angle depends on the sound level, the higher the sound level […]
Continuous Conduction Mode Pre-Converters Module for Power Factor Controller
https://www.electronics-lab.com/project/continuous-conduction-mode-pre-converters-module-for-power-factor-controller/
This compact module shown here is a Continuous Conduction Mode (CCM) Power Factor Correction Step up Pre-Converter. All-important inputs and output pins are broken out for use in your application, making this board hackable! Please refer to the datasheet of the NCP1654 chip for easy alteration and configuration of the board as per requirements. This […]
Precision Thermocouple Amplifiers with Cold Junction Compensation – Temperature Range −25°C to +400°C
https://www.electronics-lab.com/project/precision-thermocouple-amplifiers-with-cold-junction-compensation-temperature-range-%e2%88%9225c-to-400c/
This Thermocouple Amplifier project provides a simple, low-cost solution for measuring thermocouple temperature. This board simplifies many of the difficulties of measuring thermocouples output. An integrated temperature sensor performs cold junction compensation. A fixed-gain instrumentation amplifier amplifies the small thermocouple voltage to provide a 5 mV/°C output. The high common-mode rejection of the amplifier blocks […]
Universal Input AC/DC Switching Buck Regulator – 85V -265V AC Input – 5V/150mA DC Output
https://www.electronics-lab.com/project/universal-input-ac-dc-switching-buck-regulator-85v-265v-ac-input-5v-150ma-dc-output/
The project presented here is a universal input AC/DC switching buck regulator with ultra-low standby power that is capable of delivering up to 2.5W output power. The RAA223012 chip is the heart of the project which combines constant off-time control for heavy load and Pulse Frequency Modulation (PFM) for light-load operation. Constant off-time controls switching […]