Adafruit Feather AIoT Board with ESP32-S-3,WiFi, BLE, and CircuitPython Compatibility
https://www.electronics-lab.com/adafruit-feather-aiot-board-with-esp32-s-3wifi-ble-and-circuitpython-compatibility/
The Internet of Things (IoT) is a network of physical devices, vehicles and other items embedded with electronics, software, sensors, and connectivity which enables these objects to connect and exchange data. The Adafruit Feather AIoT board is a powerful and versatile tool for building Internet of Things (IoT) projects. Equipped with an ESP32-S3 microcontroller, this […]
The UP Xtreme i12 Edge Accelerates AI Application Deployment with a Compact, Fast & Powerful Edge System
https://www.electronics-lab.com/the-up-xtreme-i12-edge-accelerates-ai-application-deployment-with-a-compact-fast-powerful-edge-system/
The UP Xtreme series meets 12th Generation Intel® Core™/Celeron® power with the release of the UP Xtreme i12 Edge. AAEON, a leading manufacturer of AI development solutions, announces the UP Xtreme i12 Edge, its latest addition to the UP product series. The UP Xtreme i12 Edge makes substantial upgrades on its predecessor with the power-efficient […]
LinkStar-H68K – The Mini Computer Positioned as a Router
https://www.electronics-lab.com/linkstar-h68k-the-mini-computer-positioned-as-a-router/
Introduction IoT hardware specialist, Seeed Studio, recently released a very impressive ‘Router’ (more than a router actually) and we’ll like to take an intensive look at it. So for this article, we will be reviewing the LinkStar-H68K multimedia router and discussing the features that make it stand out amongst others. The first thing I noticed […]
Variscite Releases New System on Module for Energy-Efficient Machine Learning Edge Devices
https://www.electronics-lab.com/variscite-releases-new-system-on-module-for-energy-efficient-machine-learning-edge-devices/
The VAR-SOM-MX93 is based on NXP’s i.MX93 newest application processor, offers ML, power efficiency, and cost-effective advantages Variscite, a leading worldwide System on Module (SoM) designer, developer, and manufacturer, today announced new, state-of-the-art SoM for energy-efficient machine learning edge devices. Variscite’s VAR-SOM-MX93 is based on NXP’s iMX93 processor, the industry’s first implementation of the Arm® […]
Launching MKR IoT Carrier Rev2 board with a Bosch SensorTech BME688
https://www.electronics-lab.com/launching-mkr-iot-carrier-rev2-board-with-a-bosch-sensortech-bme688/
The Bosch SensorTech BME688 4-in-1 pressure, humidity, temperature, and gas sensor has replaced the HTS221 humidity sensor and the LP22HB barometric pressure sensor on the MKR IoT Carrier Rev2 board for Arduino MKR boards, and the LSM6DSOX has been replaced the LSM6DS3. The Arduino MKR IoT Carrier, which first debuted as part of the Arduino […]
Microchip Technology WBZ451 Curiosity Board
https://www.electronics-lab.com/microchip-technology-wbz451-curiosity-board/
Microchip Technology WBZ451 Curiosity Board is an efficient and modular development platform. It supports rapid prototyping and demonstrates the features, capabilities, and interfaces of Microchip’s BLUETOOTH® Low Energy and Zigbee RF Module (WBZ451PE). Features WBZ451PE BLUETOOTH® Low Energy and Zigbee RF module USB or Li-Po battery powered On-board programmer/debug circuit using PKoB4 based on Microchip SAME70 MCU […]
GNSS IC yields 50% greater IoT device accuracy
https://www.electronics-lab.com/gnss-ic-yields-50-greater-iot-device-accuracy/
Synaptics’ SYN4778 GNSS IC delivers 80% lower power consumption in a 30% smaller package with 50% greater accuracy. Addressing the challenge of a GNSS receiver consuming a high percentage of available power in battery-based IoT devices, Synaptics Inc. unveiled its SYN4778, claimed as the smallest, lowest power, most accurate global navigation satellite systems (GNSS) IC. […]
Meet Pixhawk RPI CM4 Baseboard from Holybro
https://www.electronics-lab.com/meet-pixhawk-rpi-cm4-baseboard-from-holybro/
The Pixhawk RPI CM4 Baseboard is a controller board designed to interface with the Pixhawk flight controller and the Raspberry Pi single-board computer. It allows users to connect the Pixhawk flight controller to the Raspberry Pi, enabling the use of the Raspberry Pi as a companion computer on a drone or other unmanned vehicle. The […]
Flex Power Modules’ BMR473 digital PoL regulator now available as SMD horizontal-mount version
https://www.electronics-lab.com/flex-power-modules-bmr473-digital-pol-regulator-now-available-as-smd-horizontal-mount-version/
The BMR473 digital non-isolated PoL converter from Flex Power Modules is now available in a surface-mount format with solder bump terminations. This new mechanical version is also suitable for reverse mounting during reflow-soldering. Dimensioned just 19 x 13 x 7.5 mm, the device operates from 6 – 15 V input and provides a fully regulated […]
Introducing the all new Maker Feather AIoT S3 to program ESP32-S3 using CircuitPython
https://www.electronics-lab.com/introducing-the-all-new-maker-feather-aiot-s3-to-program-esp32-s3-using-arduino/
The Cytron Maker Feather AIoT S3 is an ESP32-S3 board that fits the Adafruit Feather form factor. It is good for makers and STEM education because it has LEDs for GPIOs, a buzzer, expansion headers and connectors, and support for CircuitPython and Arduino. The WiFi and Bluetooth LE IoT board also work with LiPo and […]