2.5A Bipolar Stepper Driver with Micro-Stepping, Current and Decay Control – Arduino Compatible


https://www.electronics-lab.com/2-5a-bipolar-stepper-driver-with-micro-stepping-current-and-decay-control-arduino-compatible/

This is an Arduino compatible board that contains an Atmega328 microcontroller and Bipolar Stepper Motor Driver chip STK682-010. This Hybrid IC from ON Semiconductor can deliver up to 2.5A current and it can have an input supply up to 32V DC. It has multiple micro-stepping options such as Full step, 1/2th Step, 1/4th Step, 1/8th […]

Mini-ITX Motherboard with AMD Ryzen™ Embedded V1000/R1000 Processor Targets Graphics-Driven Applications – GMB140


https://www.electronics-lab.com/mini-itx-motherboard-with-amd-ryzen-embedded-v1000-r1000-processor-targets-graphics-driven-applications-gmb140/

Axiomtek Gaming – a business unit of Axiomtek, a leading designer and manufacturer of PC-based industrial products – is pleased to introduce the GMB140, its powerful Mini-ITX motherboard with the AMD Ryzen™ Embedded V1000/R1000 processor. With an effective procurement strategy plus a good relationship with AMD, Axiomtek can deliver the GMB140 with a short lead time […]

Bluetooth Low Energy (BLE) Tutorial for Arduino using BleuIO


https://www.electronics-lab.com/bluetooth-low-energy-ble-tutorial-for-arduino-using-bleuio/

1. Introduction The project is a simple example showcasing a quick way to setup an Arduino with a USB Host Shield as a USB CDC Host capable of communicating with the BleuIO Dongle. When a BleuIO Dongle is connected to the USB port, the BleuIO Dongle will start advertising. It will then act as a […]

Radiation dosimeters weigh in at just 17 gm


https://www.electronics-lab.com/radiation-dosimeters-weigh-in-at-just-17-gm/

Teledyne e2v HiRel announced the availability of 3 new radiation dosimeter models that further broaden its popular range of radiation measurement devices. Aimed at high altitude aerospace applications and all space applications from GEO satellites and LEO constellations to scientific exploration, each new model occupies minimal volume and adds only 17g weight to any mission. […]

Triple-band antenna is available at Mouser


https://www.electronics-lab.com/triple-band-antenna-is-available-at-mouser/

Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna Johanson Technology 2450AD18A6050 Mini Ultra-Wide Triple Band Antenna is a miniature BLUETOOTH®/Wi-Fi® 6E and UWB internal chip antenna that operates in the 2400MHz to 2500MHz, 4900MHz to 5850MHz, and 5850MHz to 7200MHz bands. With IEEE 802.11 ax compliance, the surface mount 2450AD18A6050 Antenna offers a single feed point […]

Schurter Capacitive Hidden Switch (CHS) Metal Line Switches


https://www.electronics-lab.com/schurter-capacitive-hidden-switch-chs-metal-line-switches/

Schurter Capacitive Hidden Switch (CHS) Metal Line Switches are intended for use behind non-conductive surfaces, enabling interface designers more flexibility in custom panel designs. These capacitive switches can be used as a single key or in arrays. The standard switches can be mounted behind a glass surface up to 2mm in thickness. The sensitivity level […]

Diodes Incorporated AP3128 PWM Controller


https://www.electronics-lab.com/diodes-incorporated-ap3128-pwm-controller/

Diodes Incorporated AP3128 PWM Controller is a peak-current control and multi-mode (QR+CCM) PWM controller. This controller is optimized for high performance, low standby power, and cost-effective offline flyback converters. The AP3128 is designed to enter burst mode at no-load/light-load and minimizes standby power consumption. This controller features a 105kHz maximum switching frequency that clamps the QR […]

MAX17330X22+ Standalone 1-Cell Charger, Fuel Gauge, and Protector


https://www.electronics-lab.com/max17330x22-standalone-1-cell-charger-fuel-gauge-and-protector/

Maxim’s highly integrated charger, fuel gauge, protector, and battery internal self-discharge detection IC for 1-cell lithium-ion/polymer batteries Maxim’s MAX17330 regulates charge voltage, current, and FET temperature with stand-alone charging supported by flexible configuration in nonvolatile memory. The IC supports the following applications: low-power charging including 1 mA to 500 mA directly from universal 5 V USB, high-power parallel […]

MP6650 Single-Phase BLDC Motor Driver features multiple protections


https://www.electronics-lab.com/mp6650-single-phase-bldc-motor-driver-features-multiple-protections/

MPS’ 18 V 2 A motor driver features include input OVP, UVLO, RD protection, thermal shutdown, and input reverse protection MPS’ MP6650 single-phase brushless DC motor driver has integrated power MOSFETs and a Hall effect sensor. The device drives single-phase brushless DC fan motors with up to 2 A of output current. The IC has […]

MP6550 H-Bridge Motor Driver consists of four N-channel power MOSFETs


https://www.electronics-lab.com/mp6550-h-bridge-motor-driver-consists-of-four-n-channel-power-mosfets/

MPS’ H-bridge motor driver consists of four N-channel power MOSFETs and an internal charge pump to generate gate-drive voltages The MP6550 from Monolithic Power Systems is an H-bridge motor driver consisting of four N-channel power MOSFETs and an internal charge pump to generate gate-drive voltages. The MP6550 is typically used to drive a DC brush motor. […]