Microphone Preamplifier – Sound Sensor
https://www.electronics-lab.com/microphone-preamplifier-sound-sensor/
This is an easy to construct dual-stage microphone pre-amplifier. The project can be used as a sound sensor or microphone pre-amplifier. The 1st op-amp pre-amplify the very low-level signal coming from the condenser microphone and 2nd op-amp provides more boost to the audio signal. The pre-amplifier is an important building block for many audio communication […]
Voltage-Controlled Pulse Width Modulator (PWM) – PWM Signal Generator
https://www.electronics-lab.com/voltage-controlled-pulse-width-modulator-pwm-pwm-signal-generator/
This is an easy-to-use voltage to PWM converter. The project occupies very little space. The circuit is built using the versatile silicon timing device LT6992-1 chip. Pulse Width Modulation (PWM) Controlled by Simple 0V to 1V Analog Input, multiturn trimmer potentiometer provided to adjust the duty cycle 0 to 100 %. The circuit also has […]
Stereo Balanced to Unbalanced Audio Converter
https://www.electronics-lab.com/stereo-balanced-to-unbalanced-audio-converter/
The primary role of this project is to convert a differential input audio signal into a single-ended output signal while rejecting noise that is common to both inputs (common-mode noise). The circuit presented here is a differential amplifier intended to receive balanced line inputs in audio applications requiring a high level of noise immunity and […]
Microphone Preamplifier – Sound Sensor
https://www.electronics-lab.com/project/microphone-preamplifier-sound-sensor/
This is an easy to construct dual-stage microphone pre-amplifier. The project can be used as a sound sensor or microphone pre-amplifier. The 1st op-amp pre-amplify the very low-level signal coming from the condenser microphone and 2nd op-amp provides more boost to the audio signal. The pre-amplifier is an important building block for many audio communication […]
Schottky Diode
https://www.electronics-lab.com/article/schottky-diode/
Schottky Diode The Schottky diode is a semiconductor diode formed by the junction of metal with the semiconductor material. It is named after the German physicist W. H. Schottky. The Schottky diode is also known as a hot-carrier diode and Schottky barrier diode. It has a low forward voltage drop and high switching speed. It […]
Stereo Balanced to Unbalanced Audio Converter
https://www.electronics-lab.com/project/stereo-balanced-to-unbalanced-audio-converter/
The primary role of this project is to convert a differential input audio signal into a single-ended output signal while rejecting noise that is common to both inputs (common-mode noise). The circuit presented here is a differential amplifier intended to receive balanced line inputs in audio applications requiring a high level of noise immunity and […]
PrizmaCap SuperCapacitors launched
https://www.electronics-lab.com/prizmacap-supercapacitors-launched/
AVX Corporation, a leading manufacturer and supplier of advanced electronic components and interconnect, sensor, control, and antenna solutions, has launched a superlative new series of standard and custom supercapacitors engineered to provide peak performance in an array of SWaP-optimized, battery-powered products. The new SCP Series PrizmaCap™ supercapacitors have the widest operating temperature range of any […]
New R&S RTO6 oscilloscopes from Rohde & Schwarz deliver instant insights thanks to enhanced usability and performance
https://www.electronics-lab.com/new-rs-rto6-oscilloscopes-from-rohde-schwarz-deliver-instant-insights-thanks-to-enhanced-usability-and-performance/
Rohde & Schwarz takes its successful R&S RTO family to the next level with the all-new and redesigned R&S RTO6 oscilloscope. Featuring an updated user interface on a larger, 15.6-inch Full HD touchscreen and straightforward workflows, it speeds up daily measurement tasks. The R&S RTO6 delivers deep insights into designs on the engineer’s workbench with […]
Arduino UNO-like AB32VG1 Development Board based on RISC-V MCU
https://www.electronics-lab.com/arduino-uno-like-ab32vg1-development-board-based-on-risc-v-mcu/
Recently, there have been several developments in the RISC-V community with its increasing use case in various domains. We have seen this open-source technology grow at an impressive rate, catching the eye of the makers’ community to implement extraordinary projects. To help them, a RISC-V member Chinese chip design manufacturer known for its high-performance Bluetooth […]
ADLINK’s CM5-P1000 Features NVIDIA Quadro P1000 GPU
https://www.electronics-lab.com/adlinks-cm5-p1000-features-nvidia-quadro-p1000-gpu/
We saw ADLINK releasing the industry’s first embedded MXM graphic modules based on NVIDIA’s Turing architecture, to accelerate edge AI inference in SWaP-constrained applications. Now, ADLINK Technology has come up with CM5-P1000, the world’s first COTS PC/104 module to feature NVIDIA’s Quadro P1000 GPU. It primarily targets AI-enabled mission-critical applications. Measuring just 116 x 96 […]