PCB Manufacture and Assembly with JLCPCB in Easier Way
https://www.electronics-lab.com/pcb-manufacture-and-assembly-with-jlcpcb-in-easier-way/
As we all know, for hobbyists, hardware engineers, and electronic students how important PCBs are for electronic projects. And in electronic engineering, there are different types of projects that are constructed with different types of components. So makers, developers, and electronic enthusiasts have been prototyping electronic circuits using breadboards, Raspberry Pi mini PCs, Arduino’s, and […]
Humidity Sensor – Humidity to Frequency Output
https://www.electronics-lab.com/project/humidity-sensor-humidity-to-frequency-output/
This sensor board provides frequency output as per relative humidity value. The project is based on a unique capacitive cell, this relative humidity sensor is designed for high volume, cost-sensitive applications such as office automation, automotive cabin air control, home appliances, and industrial process control systems. It is also useful in all applications where humidity […]
Variscite and Basler expand collaboration for embedded vision solutions with NXP® i.MX 8M Plus technology
https://www.electronics-lab.com/variscite-and-basler-expand-collaboration-for-embedded-vision-solutions-with-nxp-i-mx-8m-plus-technology/
Variscite, a leading System on Module manufacturer, and Basler, an expert in embedded vision, are stepping up their collaboration for solutions based on the NXP i.MX 8 application processor series. Basler and Variscite continue to expand their cooperation, which started in 2018. Both companies offer a complete solution based on NXP i.MX 8 series for […]
TDK InvenSense ICP-10125 Pressure & Temperature Sensor IC is waterproof
https://www.electronics-lab.com/tdk-invensense-icp-10125-pressure-temperature-sensor-ic-is-waterproof/
TDK InvenSense ICP-10125 Pressure and Temperature Sensor IC is based on MEMS capacitive technology which provides ultra-low noise at the lowest power. This enables the sensor IC to provide industry-leading relative accuracy, sensor throughput, and temperature stability. This sensor IC can measure pressure differences with an accuracy of ±1Pa. This accuracy enables altitude measurement differentials as […]
Cassiopeia CB410L CBRS Module
https://www.electronics-lab.com/cassiopeia-cb410l-cbrs-module/
Sequans’ CB410L all-in-one standalone module is suitable for a wide range of medium-rate data applications Sequans’ Cassiopeia CB410L cost-effective leadless chip carrier (LCC) module is purpose-built to enable easy and massive deployment of IoT devices on private LTE CBRS networks. Based on the Cassiopeia broadband IoT chip, CB410L is suitable for a wide range of […]
MCP4461 8-Bit Quad digital potentiometers with NVM and I2C
https://www.electronics-lab.com/mcp4461-8-bit-quad-digital-potentiometers-with-nvm-and-i2c/
Microchip’s MCP4461 non-volatile 8-bit digital potentiometers with EEPROM and an I2C compatible interface The MCP4461 devices from Microchip Technology; are non-volatile, 8-bit (257 wiper steps) digital potentiometers with EEPROM and an I2C compatible interface. The MCP446X family is available with end-to-end resistor values of 5 KΩ, 10 KΩ, 50 kΩ, and 100 KΩ. These devices […]
paperd.ink: Simple and Elegant E-paper development board
https://www.electronics-lab.com/paperd-ink-simple-and-elegant-e-paper-development-board/
E-paper or e-ink displays mimic the appearance of ink on paper, making it suitable for reading. These displays provide a wider viewing angle, and the e-paper display is easily visible in direct sunlight without the image appearing to fade. Most e-paper displays today are based on ESP32 WiFi with touchscreens and additional Bluetooth connectivity. Earlier, […]
Researchers from the University of Chicago developed a foldable haptic actuator for mixed reality applications
https://www.electronics-lab.com/researchers-from-the-university-of-chicago-developed-a-foldable-haptic-actuator-for-mixed-reality-applications/
Actuators are the moving part of a device that controls the mechanism of a system. A simple example of an actuator is the opening of a valve. With this simple example of a solenoidal valve, we can understand that an actuator (or, in other words, a part that performs a movement in a specific direction) […]
Canique Climat: A Unique temperature/humidity sensor or ultra low power systems
https://www.electronics-lab.com/canique-climat-a-unique-temperature-humidity-sensor-or-ultra-low-power-systems/
As a maker, you may have come across various IoT temperature and humidity monitors with low-power consumption. Canique Climat is a unique sensor that features ultra-low power consumption of only 2.5uA when powered by a 1.25V battery. The latest revision offers: reduced quiescent current from 9.5µA to 2.5µA (@ 1.25V) reduced ripple voltage during RX […]
STEP-MXO2 FPGA Development Board for Educational Learning
https://www.electronics-lab.com/step-mxo2-fpga-development-board-for-educational-learning/
EIM technology has come up with STEP-MXO2 FPGA development board, a compact, breadboard-friendly, and easy-to-learn hardware design platform built around the Lattice MachXO2 FPGA. It is targeted mainly for educational purposes. Hence, it offers several features that allow users to implement a wide range of designed circuits, from simple circuits to various creative applications. STEP-MXO2 […]